• The Journal of Engineering Geology
• /
• v.17 no.1 s.50
• /
• pp.27-40
• /
• 2007

Stratigraphy has been renewedly set up and the evolution of tectonic events related to basin formation has been exam-ined on the basis of fault-slip data analysis in the Tertiary Eoil and Waeup basins of the southeastern part of Korea. First of all, field mapping was carried out in detail for Tertiary formations and then paleostress analysis were peformed with more than 400 fault slip data collected from 11 sites in the Tertiary formations and the Yucheon Group. It is judged that both the Eoil and Waeup basins filled up with Tertiary deposits might be simultaneously formed in separate locations. The Janggi Group in the Eoil basin is divided into following stratigraphic units in ascending order: Gampo Conglomerte, Hongdeok Basalt, Nodongri Conglomerate and Yeondang Basalt, and the Bomkori Group in the Waeup basin: Waeupri Tuff; Andongri Conglomerate, Yongdongri Tuff and Hoamri Volcanic Breccia. Paleostress analysis by using striated faults reveals five sequential tectonic events: (1) NW-SE transtension (event I), (2) NW-SE transpression (event IIl), (3) NE-SW pure extension (event III), (4) N-S transpression (event IV) and (5) E-W pure compression (event V). Therefore, five sequential tectonic movements are closely associated with the formation and evolution of the Tertiary basins in the study area: tectonic event I of NW-SE extension is related to formation of the Tertiary basins during the late Oligocene to the Early Miocene, tectonic events II, III and IV caused the termination of the Tertiary basin opening and the crustal uplift in the study area, and tectonic event V upheaved the east coast or Korean Peninsula with compressive stress due to intense subduction of the Pacific plate into Asian continent since the Early Pliocene.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.193-193
• /
• 2011

본 연구에서는 산불발생인자들에 대한 정보를 각각의 요인별로 집적화하고 체계화시킴으로써 산불예방활동의 기초자료로 활용할 뿐만 아니라 산불발생 시, 산불의 거동을 예측하기 위한 자료로 활용하고자 하였다. 발생인자는 크게 연료 및 기상조건 관련 인자와 열적특성 관련 인자로 분류하고 연료 및 기상조건 관련 인자는 수종별, 부위별, 지역별, 고도별, 월별 산림연료들의 구성 요인들에 대해서 분석하였다. 수종별로는 생강나무, 초피나무, 조록싸리, 산초, 개암, 청미래, 고추나무, 철쭉, 조릿대, 털진달래 등 관목류 10개 수종과 김의털, 방아풀, 주름조개풀, 칡, 엉겅퀴 등 초본류 5개 수종 그리고 소나무, 잣나무, 리기다소나무, 해송, 구상나무, 주목 등 6개의 침엽수 및 굴참나무, 떡갈나무, 신갈나무, 갈참나무, 졸참나무, 상수리, 산개벚나무, 고채목, 개서어나무, 굴거리나무, 서어나무, 산벚나무, 때죽나무, 당단풍나무, 단풍나무 등 15개의 활엽수로 구성된 교목류를 대상으로 분석하였다. 부위별로는 생엽, 낙엽, 가지, 수피, 솔방울 등으로 구분하여 분석을 수행했으며, 지역별 구성은 강원(삼척/태백산), 경북(응봉산), 경기(용문산), 충북(월악산), 충남(계룡산), 전북(덕유산), 전남(월출산), 부산(금정산), 제주(한라산) 등 9개 지역을 대상으로 선정하였다. 고도별로는 강원도에 소재하고 있는 태백산을 중심으로 소나무와 신갈나무 생엽을 대상으로 900m, 1000m, 1100m, 1200m, 1300m, 1400m, 1500m 고도를 선정하여 분석을 수행하였다. 월별 분석데이터는 소나무 생엽의 경우, 2008년 6월부터 2010년 11월까지 매월 분석을 수행하였으며, 굴참나무 생엽의 경우에는 2008년부터 2010년까지 매년 6월부터 10월까지 생엽을 채취할 수 있는 기간 동안 분석을 수행하였다. 또한, 열적특성 관련 인자로는 착화특성(무염착화온도, 발염착화시간, 소염시간, 화염지속시간), 발열특성(총열방출량, 평균열방출률), 발연특성(총연기방출량, 최대연기밀도, 최대밀도시간) 등을 고찰하였다. 이와 같은 결과들은 산불발생인자 DB구축으로 부터 산불발생 위험도 및 동태예측의 기본 자료로 활용할 수 있을 뿐만 아니라 지역별 연료별 산림연료의 열적특성 DB로 부터 산불발생시 산불 위험도에 대한 기술정립과 응용성을 향상시킬 수 있을 것으로 사료된다. 이외에도 산림연료 종류별 열적특성을 결과를 토대로 문화재보존지역과 같이 문화적 가치가 높은 시설이나 주유소, 가스 충전소 등의 위험 시설에 대한 효과적인 보호를 위한 대처 방안을 사전에 준비할 수 있어 산불 피해에 대한 국민의 불안감을 줄일 수 있을 것으로 생각된다.

• Journal of the Korean Institute of Gas
• /
• v.26 no.4
• /
• pp.58-63
• /
• 2022

With the emergence of environmental problems caused by fine dust worldwide, LNG, which is cheaper and less pollution than diesel, is attracting attention as the next generation energy of automobiles and is expanding its supply. However, it is difficult to operate smoothly due to the lack of infrastructure for LNG charging stations in Korea and the limited size of containers that can be installed according to regulations. In Korea, research and development on the contents of containers for the smooth operation of natural gas vehicles are underway, but there is a problem that the container directly receives the impact of the vehicle collision and explodes, causing a major disaster. Therefore, in this study, the safety of the container was verified by deriving the strain and stress values through ANSYS Explicit Dynamics analysis. As a result, a maximum stress of 565.37MPa occurred in the container, and it is expected that plastic deformation will occur as it exceeds the yield stress of STS304 used as a material for the container, which is beyond 505MPa. When an impact caused by a collision between a vehicle and a container is applied, it is considered necessary to design a support or reinforcement because the container may be damaged or defective.

• Journal of Astronomy and Space Sciences
• /
• v.11 no.1
• /
• pp.71-80
• /
• 1994

It is generally known that the measurement of the ionospheric total electron content(TEC) by GPS can more accurately monitor the broader area of the ionosphere than other current methods. \Ve measured the TEC along a slant path considering the arrival time differences of P-code which is transmitted from GPS satellites with the modulation on two L-band carrier frequencies, L1 (1574.42MHz) and L2 (1227.60MHz). Under the assumptions that the ionosphere is uniformly distributed and its average height is 350km, we transformed the slant TEC to the vertical TEC at the point that the line-of-sight direction to GPS satellite cut across the average height of the ionosphere. Because there is no dual frequency P-code GPS receiver in Korea, we used the data observed at the TAIW GPS station ($N25^{\circ},E121.5^{\circ}$) in Taiwan which is one of the core stations in International GPS and Geodynamics Services (IGS). The TEC values obtained in this work showed a typical daily variation of the ionosphere which is high in the daytime and low in the nighttime. Our results are found to be consistent with the SOLAR-DAILY data of NOAA and the Klobuchar's model for the ionospheric correction of GPS. In addition, in the cornparision with SOLAR-DAILY data, we estimated the precision of our TEC measurement as 2 TEC.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.1
• /
• pp.27-29
• /
• 2002

We report a fuel cell power supply unit for mobile phone which operates at room temperature and ambient pressure using liquid methanol and air. The unit consists of a direct methanol fuel cell (DMFC) and a back-up battery connected parallely to the fuel cell. DMFC supplies half of the required power and the back-up battery supplies the other half during talk mode. In standby mode, DMFC covers $100\%$ of the required power and charges the back-up battery as well, Eight unit cells, each having $9 cm^2$ of active area, were connected in series in order to raise the output volotage to $2.5\~3.9V$, which is typical for most mobile phones.

• Journal of Conservation Science
• /
• v.34 no.3
• /
• pp.167-177
• /
• 2018

The Bayon style Avalokitesvara statue from the $13^{th}$ century Angkor period is on display at the Cambodia Angkor Conservation Office. This statue is composed of dark green felthspathic greywacke, the surface of which has been shown light brown discoloration, detected calcite crystallization. As a result of condition assessment, the statue was damaged due to overlap scaling and cracking. Ultrasonic tests have investigated remarkable physical weathering area, flaking and fragmentation in lower velocity. The physical condition of the statue requires a conservation method that improves the binding power. To protect against salt weathering and to ensure physical stability, new conservation material composed of mixed ethyl silicate and sandstone powder similar to that composing the statue was created. The material affected by damage was removed and replaced with the new conservation material.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.138-138
• /
• 2000

국내의 백상지 공정은 공정에 투입되는 청수의 양을 줄이면서 동시에 폐수 배출 양을 감 소시키기 위해 많은 노력을 하고 있다. 공정으로 유입되는 청수의 양과 처리된 폐수의 양을 줄이기 위한 방법으로 PDFCpolydisk filter)를 도입하여 백수를 여과하여 showertf sealing 에 재사용하고 있으며 공정수 재활용에 따른 유기 물질과 무기물질의 계 내로의 축적을 방 지하기 위한 효과적인 폐수 처리방법을 모색하고 있다. 일반적으로 청수를 백수로 대체할 경우 공정 백수 내에 TDSCtotal dissolved solid), T TSSCtotal suspended solid), CODCchemical oxygen demand), 전기 전도도와 칼숨 경 도 등이 증가되며 음이온성 저해 물질Canionic trash)이 증가하여 보류 및 지력증강용 첨가제의 효율 을 떨어뜨릴 뿐만 아니라 마모, 슬라엄, 펠트 막힘 등의 문제를 유발하게 된다고 알려져 있다. 청수를 백수로 대체함에 따라 생기는 이러한 문제를 해결하면서 효율적인 청수 절약 방안 을 세우기 위해서는 무엇보다도 문제를 유발하는 원인 물질의 축적 양을 예측하는 것이 중 요하다고 판단된다. 본 연구는 백상지 공정의 폐쇄화 수준이 높아짐에 따른 공정 백수 내의 유기물질의 축적 현상을 분석하는 것올 목적으로 하였다. 이를 위해 산화전분을 유기물질의 대표하는 물질로 설정하였다. 이는 백상파지와 함께 초지계 내로 유업되는 산화전분은 파지의 4%를 차지할 정도로 유입량이 많을 뿐만 아니라 음이온성을 띄고 있어서 지료에 홉착율이 낮고 양이온성 고분자의 효율을 저해하며 슬라임의 원인이 되기도 하는 물질이기 때문이다. 산화전분의 축적 현상을 분석하기 위하여 pilot 설비 상세 설계도를 참고하여 하루 생산량 이 16 T/D이고 백상파지만이 파지로 유입되는 백상지 생산 공정을 모델로하였으며, 산화전 분의 홉착과 용출 모델을 만들어 상용 시율레이터를 이용하여 시율레이션 프로그램을 작성 하였다. 시률레이션 프로그램에서는 장섬유 미세섬유, 충전제를 지료 구성 성분으로 설정하였고 O Orccotoma 등이 사용한 일과 보류도 모델을 응용하여 보류도 모델올 만들었다. 산화전분은 백상파지에 포함된 형태로만 초지계 내로 유입되며 백상파지가 해리되는 과정에서 완전히 백수에 용출되었다가 지료 구성 성분에 홉착되는 것으로 가정하였다. 지료 홉착된 산화전분 의 양은 용존 산화전분 총량에 비례하는 것으로 가정하였으며, 이 때 이 비례상수를 전분 홉착율이라 정의하였다. 시율레이션 결과, 공정 폐쇄화가 진행됨에 따라 백수 내의 산화 전분 농도는 증가하게 되 며, 폐쇄화 수준이 높아질수록 백수 내 전분 농도의 증가량은 더 높아졌다. 백수 내의 전분 농도의 증가량은 백상파지 첨가량이 증가할수록, 표면 사이징 양이 증가할수록 커졌다.

• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.710-717
• /
• 2002

Molecularly imprinted polymers were prepared in particle forms by crosslinking methacrylic acid (MAA)) using all trans-retinoic acid as a template. The HPLC column packed with the prepared molecular imprinted polymers showed high capability in separation of retinoid derivatives. The column capacity factor and selectivity increased with increasing MAA to template ratio when the incorporated template amount was fixed, as it statistically generated more binding sites between host molecules and template. Molecularly imprinted polymer particles prepared via an emulsion polymerization method were round-shaped and their sizes were more uniformly distributed, but their separation capability was inferior to those obtained by solution polymerization method. It was presumably because the loss of interaction strength between MAA and the template due to hydrogen bonding either between MAA and water or between template and water during the synthesis of molecularly imprinted polymers.

• Microbiology and Biotechnology Letters
• /
• v.42 no.3
• /
• pp.307-311
• /
• 2014

This study investigated the effects of polyurethane foam on continuous hydrogen production from mixed wastes. Molasses was co-fermented with non-pretreated sewage sludge in a sequencing batch reactor. The results indicated that the addition of polyurethane foams as a microbial carrier in the reactor mitigated biomass loss at HRT 12 h, while most of the biomass was washed out during the operation period with no carrier. There was a stable hydrogen production rate of $0.4L-H_2/l/d$ in the carrier-sequencing batch reactor. Suspended biomass in the carrier-reactor indicated it possessed the highest specific hydrogen production rate ($241{\pm}4ml-H_2/g\;VSS/d$) when compared to that of biomass on the surface ($133{\pm}10ml-H_2/g\;VSS/d$) or inner carrier ($95{\pm}14ml-H_2/g\;VSS/d$).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.1
• /
• pp.30-37
• /
• 2002

Bacterial microleakage around restorations is considered the principal cause of pulpal inflammation associated with restorations. The rationale for using cavity disinfectant is based on its antimicrobial properties but the cavity disinfectant may leave debris on dentin surfaces. The purpose of this study was to evaluate the effect of 2% chlorhexidine on shear bond strength and microleakage of adhesive restoration. 45 sound bovine teeth were used for the shear bond strength test and 30 for the micorleakage. For the experimental groups, 2% chlorhexidine was applied before the restorations, and was not for the control groups. The result from the this study can be summarized as follows; 1. No significant difference could be found in shear bond strength of each group. 2. No significant difference could be found in microleakage of each group.