• Health Policy and Management
• /
• v.23 no.2
• /
• pp.124-131
• /
• 2013

Background: This study aimed to measure the opportunity income by identifying the economic length of stay (ELOS) which is the intersection point of daily revenue and cost on appendectomy and pneumonia cases. Methods: The research subjects were 460 patients of appendectomy and 606 patients of pneumonia, discharged from a general hospital between July 1, 2009 and June 30, 2010. ELOS calculated with both of total revenue on diagnosis-related group (DRG) and fee-for service (FFS). The cost is calculated by activity-based costing system of the hospital. Results: Average length of stay (ALOS) of appendectomy was 4.48 days and its average revenue per case were 1,710,215 (1,989,105) won by DRG (FFS). The variable cost was 491,262 won which was 28.7% (24.7%) of DRG (FFS) total revenue. And 97.2% of the total variable cost was incurred within 2 days from admission. The ELOS was 4 (5) days in DRG (FFS). Shortening three days (two days) would increase opportunity income 52.0% (82.2%) in DRG (FFS). ALOS of pneumonia case was 4.86 days and its average revenue per case were 489,448 (761,426) won by DRG (FFS). The variable cost was 27,230 won which was 5.6% (3.6%) of DRG (FFS) total revenue. Thirty-eight point nine percent of the daily variable cost was incurred in discharge date. The ELOS was 2 (4) days in DRS (FFS). Shortening three days (one day) would increase opportunity income 27.6% (37.2%) in DRG (FFS). Conclusion: The ELOS would be used by strategic index for achieving minimum profit and developing the ways to get there. But we also should not pass over that the opportunity income obtained by the reducing ALOS may cause some problem of quality.

• Journal of Biosystems Engineering
• /
• v.36 no.2
• /
• pp.109-115
• /
• 2011

Drying characteristics of squids under two dry conditions were investigated using far infrared and heated air. Dry temperatures of 40, 50 and $60^{\circ}C$ with air speed of 0.6, 0.8 and 1.2 m/s were used for evaluating far infrared squid drying. Heated air squid drying at 40 and $50^{\circ}C$ with air speed of 0.8 m/s was used as a control treatment. The two drying were evaluated in terms of drying rate, color, TBA value, aerobic bacteria, cutting shear, penetration strength, and energy consumption. The drying rate of far infrared drying was relatively faster than that of heated air drying. The drying time of far infrared drying was reduced as the drying temperature increased. The color difference of far infrared dried squids was from 18.81 to 22.85, and heated air dried squid had the color different from 23.94 to 24.09. Far infrared dried squid had relatively smaller TBA values that indicate a level of rancidity. The aerobic bacteria of heated air dried squid increased from $970{\times}10^3$ to $40,000{\times}10^3$ CFU/g before and after drying, respectively. Far infrared dried squid had relatively smaller increase (from $970{\times}10^3$ to $40,000{\times}10^3$ CFU/g). The cutting shear and penetration strength for far infrared dried squids was relatively lower. In addition, far infrared squid drying consumed relatively less energy compared to heated air drying.

• Journal of Biosystems Engineering
• /
• v.34 no.3
• /
• pp.175-182
• /
• 2009

This study was conducted to investigate the drying characteristics of tissue cultured mountain ginseng roots. The far infrared rays dryer of a double blast system used for this experiment can control the drying parameters such as far infrared heater temperature and air velocity. The far infrared rays drying tests of tissue cultured mountain ginseng roots were performed at air velocity of 0.4, 0.6, 0.8 m/s, under drying air temperature of 50, 60, and $70^{circ}C$, respectively. The results were compared with one obtained by the heated air drying method. The drying characteristics such as drying rate, color, energy consumption, saponin components and antioxidant activities were analyzed. The results showed that the drying rate of far infrared rays drying was faster than that of heated air drying and due to high temperature of drying air and fast air velocity, the far infrared rays drying of double blast type was superior to the heated air drying. The value of the color difference for heated air drying was 10.11${\sim}$12.99 and that of far infrared rays drying was in the range of 7.05${\sim}$7.54, which was in the same drying condition, also energy consumption of far infrared rays drying was in the range of 3575${\sim}$6898 kJ/kg-water. At the same time, the antioxidant activities using far infrared rays drying were higher than those using heated air drying.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.4
• /
• pp.361-365
• /
• 1999

This atudy was conducted to determine the growth characteristics and photosynthesis of soybean (Glycine max L. cv. Keumjongkongl) 30 day old seedling to 100mM NaCl concentration containing 1/2 Hoagland`s nutrient solution in sand culture. The nodule formation of root is not found perfectly with NaCl stress. The leaf dry matter weight (g/plant) of stressed plant is more reduction in 77% to control than any other characters. The water content (%) is tend to increase but water potential (MPa) is tend to decrease at NaCl stress. The chlorophyll content (SPAD) is tend to increase at growing leaf age of control but decrease at NaCl stress. The photosynthesis, stomatal conductance and transpiration are tend to decrease sharply at NaCl stress.

• Journal of Biosystems Engineering
• /
• v.26 no.2
• /
• pp.177-188
• /
• 2001

This research was carried out to examine the optimum design conditions of a vertical small-scale milling machine where the rough rice is processed directly into the white rice in one pass. Effects of the main spindle speed, feed screw pitch and ceramic coating length of the roller on various milling characteristics such as white rice processing capacity, electric energy consumption, rice temperature increase, broken rice ratio, moisture reduction, outlet force and crack ratio increase were studied. The results are as follows. 1. The maximum white rice processing capacity and the lowest crack ratio increase, were obtained from a machine with specification: main spindle speed of 970rpm having a feed screw pitch of 19㎜. 2. The minimum electric energy consumption was obtained with the main spindle speeds of 900 and 970rpm respectively having a feed screw pitch of 19㎜. 3. The rice temperature was increased as the feed screw pitch decreased and the main spindle speed increased. 4. Broken rice ratio was relatively low with the range of 0.8∼1.3%. 5. Moisture content loss was with the range of 0.05∼0.4%. 6. The highest outlet force was 0.72kg$\_$f/ with 900rpm of the main spindle speed and 19㎜ of the feed screw pitch and the lowest outlet force was 0.18∼0.34kg$\_$f/ with 970rpm of the main spindle speed and 16㎜ of the feed screw pitch. 7. The optimum design conditions for the vertical small-scale milling machine were obtained at 970rpm of the main spindle speed, 19㎜ of the feed screw pitch and 20㎜ of the ceramics coating length.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.701-705
• /
• 2006

강우자료는 수문 모델링 작업에서 가장 기초적인 수문학적 입력자료로 시간과 공간에 따른 변동성이 크므로 규명하기 복잡한 수문현상 중의 하나이다. 산악지역이 많은 우리나라의 지형학적 특성과 태풍, 장마 및 특히, 최근의 게릴라성 집중호우 등으로 인하여 이러한 변동성이 더욱 커지고 있는 실정이다. 장기간 실측된 수문기상 기초 자료가 부족한 우리나라의 실정상 홍수예보 및 수공구조물 설계를 위해 정확한 강우량 자료의 취득이 선행돼야 한다. 따라서 적절한 장소에 수문관측소 설치 및 관리를 통해 양호한 강우량 자료를 획득해야 하지만, 현장 여건상 등의 이유로 미계측 및 결측, 이상자료가 발생하고 있다. 따라서 이러한 미계측 혹은 결측지점의 우량을 추정할 수 있는 방법을 비교, 분석하여 적절한 보정과정을 수행할 필요가 있다. 그간의 연구에서는 미계측 지점 혹은 산악지역에서의 점 강우량 보정방법에 대한 연구가 진행되었지만, 본 연구에서는 '도시홍수재해관리기술연구사업단'에서 운영 중인 도시하천 유역 특히 소배수구역에서의 결측 자료에 대해 여러 추정 방법을 비교, 분석하여 적절한 방안을 찾고자 한다. 이를 위하여 중랑천 유역의 3개 소배수 구역(월계1 배수구역, 군자 배수구역, 어린이대공원 배수구역)에 설치된 3개 우량관측소와 건설교통부 관할 우량관측소 2개소의 우량자료를 사용하였다. 본 연구에서는 결측치 보간을 위하여 널리 이용되고 있는 산술평균법(Arithmetic Average method), 역거리법(Reciprocal Distance Squared method), 거리고도비율법(Ratio of Distance and Elevation method), 인근관측소와의 관계식 이용, 크리깅방법(Simple Kriging method)을 비교, 검토 적용하였다. 중랑천 유역의 소배수구역을 대상으로 연중 발생하는 큰 호우사상에 대해 임의의 강우관측소를 결측지점으로 가정하고 주변의 강우관측소로부터 각각의 방법을 이용해 가중치들을 산정하여 결측지점의 강우량 값을 보정하고자 하였다. 또한 각각의 방법을 이용하여 얻어진 결과에 대해 실측값과 보정값의 오차정도를 평균절대오차법(Mean Absolute Error)과 제곱평균제곱근오차법(Root Mean Squared Error)에 의해 산정하여 보정 방법간의 효율성을 검토하고자 하였다.

• Korean Journal of Materials Research
• /
• v.10 no.5
• /
• pp.369-374
• /
• 2000

In order to investigate the effects of addition of 1M sulfuric acid to the etching solution or 1M hydrochloric acid on the etching behavior of aluminum foil for electrolytic capacitors, the changes in the density of etch pit, the length and diameter of etch tunnels and the capacitance were analyzed using SEM, TEM, LCR meter etc. Sulfate ion as a corrosion inhibitor was contributed to the increase of the surface area comparing with chloride ion. By adding sul-furic acid the density of etch pit and the length of etched tunnel increased and the diameter of the tunnel decreased, resulting in the increase of capacitance. It was also shown that the capacitance decreased when the current density was below $0.9A/\textrm{cm}^2$, while remarkably increased in the other case.

• Tunnel and Underground Space
• /
• v.20 no.4
• /
• pp.233-240
• /
• 2010

Double Plug is constructed for preventing mixing of two different oils between two compartments in the underground oil storage cavern. And the gas and oil tightness of double plug is tested from the measurement of water leakage from double plug after the completion of double plug water filling. If water leakage is underestimated, it can increase construction cost and if water leakage is overestimated, it can increase operating cost. Therefore, optimum water leakage should be estimated to cut down the cost. In this study, hydraulic stability analysis was conducted to consider permeable properties of rock mass around double plugs and a water leak rate from double plug was estimated from the hydraulic stability analysis and case study. Finally, the reliability of estimation of water leak rate was proven by comparing estimated water leak rate with measured data.

• Korean Journal of Clinical Pharmacy
• /
• v.21 no.2
• /
• pp.74-80
• /
• 2011

Population pharmacokinetics for gentamicin were compared with 20 Korean patients (14 male and 6 female) and 25 Caucasian appendicitis patients (16 male and 9 female). Two to six blood specimens were collected from all patients at the following times : just before a regularly scheduled infusion and at 0.5 hour after the end of a 0.5 hour infusion. Nonparametric expected maximum(NPEM) algorithm for population modeling was used. The estimated parameters were the elimination rate constant(K), the slope(KS) of the relationship between K versus creatinine clearance(Ccr), the apparent volume of distribution (V), the slope(VS) of the relationship between V versus weight, gentamicin clearance(CL) and the slope(CS) of the relationship between CL versus Ccr and the V. The output includes two marginal probability density function(PDF), means, medians, modes, variance, skewness, kurtosis, and CV%. The mean K(KS) were$0.402{\pm}0.129hr^{-1}$ ($0.00486{\pm}0.00197[hr{\cdot}mL/min/1.73m^2]^{-1}$) and $0.425{\pm}0.137hr^{-1}$($0.00432{\pm}0.00168[hr{\cdot}mL/min/1.73m^2]^{-1}$) for Korean and Caucasian populations, respectively. The mean V(VS) were not different at $14.3{\pm}3.69L$($0.241{\pm}0.0511L/kg$) and $15.8{\pm}4.81L$($0.236{\pm}0.0531L/kg$) for Korean and Caucasian populations, respectively (P>0.2). The mean CL(CS) were $5.68{\pm}1.69L/hr$ ($0.0714{\pm}0.0222L/kg[hr{\cdot}mL/min/1.73m^2]$) and $6.29{\pm}1.84L/hr$ ($0.0629{\pm}0.0189L/kg[hr{\cdot}mL/min/1.73m^2]$) for Korean and Caucasian populations, respectively. There are no differences in gentamicin pharmacokinetics between Korean and Caucasian appendicitis patients.

• Journal of the Korean Institute of Gas
• /
• v.4 no.1 s.9
• /
• pp.9-15
• /
• 2000

In order to investigate the structural defects of a cylindrical-type toluene storage tank, we carried out the acoustic emissions. The storage tank was manufactured with high strength steel in 1978 and its's first and second courses from bottom were entirely repaired, recently. Acoustic emissions were monitored with real time according to load sequences in the $75{\~}84\%$ level range of maximum allowable load. Our results show a non-genuine acoustic emissions as well as a genuine characteristics. The pseudo emissions considered as valve noises were transiently occurred on shut-off processes of inlet valve regardless of water loading. The acoustic emission events occurred during water filling phase were estimated due to defects, and in the $75{\~}84\%$ test load level no evidences of defect growth were observed. Those defects were ascertained as weld cracks and porosities through the post radiography testing conducted near active sensors.