• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.181-181
• /
• 2016

우리나라의 유사량 조사는 각각의 수문조사기관에서 자료의 이용 목적에 따라 간헐적으로 수행되고 있을 뿐, 체계적이고 지속적인 조사가 이루어지지 않아 타 수문자료에 비해 측정자료 구축 현황은 상당히 미비한 상태에 있다. 측정 자료 또한 부유사 실측자료는 있으나 소류사 측정자료는 거의 전무한 상태이기 때문에 신뢰성 있는 총 유사량을 산정하기에는 많은 어려움을 겪고 있는 실정이다. 현재 우리나라는 소류사량을 산정하기 위해 경험식에 의한 방법과 실측에 의한 방법을 이용하고 있다. 그러나 실측에 의한 방법은 측정 장비의 설치 및 운영에 따른 위험성이 동반되고 많은 인력, 경비, 시간이 소요되는 등 많은 문제점을 내포하고 있고, 경험식에 의한 방법 또한 대상 유역에 수많은 경험식 중 어떤 공식을 적용하는지에 따라 결과 값이 수십에서 수백 배 이상의 차이가 나기 때문에 실제 그 결과 값을 활용하기에는 신뢰의 정도가 떨어진다. 최근 국외에서는 이러한 문제점을 보완하기 위하여 음향 및 진동의 원리를 이용하여 소류사량을 간접적으로 추정하는 관측기기인 Hydrophone 및 Geophone이 개발되어 실용화를 위한 검토가 이루어지고 있다. 소류사량을 간접적으로 추정하는 방법은 기존의 직접측정 방법에 비해 측정이 간소화되고 지속적적인 관측이 가능하다는 점에서 유역의 소류사이동의 양과 질을 파악하는데 유효한 수단인 것으로 국외의 연구사례에서 언급하고 있다. 따라서, 본 연구에서는 소류사 이동시 충돌에 의한 음향정보를 계측하여 소류사량을 연속적으로 측정할 수 있는 Hydro-Geophone을 활용하여 실내 실험을 구축하고, 소류사 이동에 따른 Hydro-Geophone의 충돌음향 계측 및 분석 등을 통해 현장에서 활용 가능한 소류사 추정 관계식을 개발하는 연구를 수행 하였다.

• Journal of Korean Society of Transportation
• /
• v.20 no.2
• /
• pp.105-115
• /
• 2002

For many rears, traffic accident statistics are the most direct measure of safety for a signalized intersection. However it takes more than 2 or 3 yearn to collect certain accident data for adequate sample sizes. And the accident data itself is unreliable because of the difference between accident data recorded and accident that is actually occurred. Therefore, it is rather difficult to evaluate safety for a intersection by using accident data. For these reasons, traffic conflict technique(TCT) was developed as a buick and accurate counter-measure of safety for a intersection. However, the collected conflict data is not always reliable because there is absence of clear criteria for conflict. This study developed objective and accurate conflict criteria, which is shown below based on traffic engineering theory. Frist, the rear-end conflict is regarded, when the following vehicle takes evasive maneuver against the first vehicle within a certain distance, according to car-following theory. Second, lane-change conflict is regarded when the following vehicle takes evasive maneuver against first vehicle which is changing its lane within the minimum stopping distance of the following vehicle. Third, cross and opposing-left turn conflicts are regarded when the vehicle which receives green sign takes evasive maneuver against the vehicle which lost its right-of-way crossing a intersection. As a result of correlation analysis between conflict and accident, it is verified that the suggested conflict criteria in this study ave applicable. And it is proven that estimating safety evaluation for a intersection with conflict data is possible, according to the regression analysis preformed between accident and conflict, EPDO accident and conflict. Adopting the conflict criteria suggested in this study would be both quick and accurate method for diagnosing safety and operational deficiencies and for evaluation improvements at intersections. Further research is required to refine the suggested conflict criteria to extend its application. In addition, it is necessary to develope other types of conflict criteria, not included in this study, in later study.

• Journal of Navigation and Port Research
• /
• v.28 no.6
• /
• pp.481-489
• /
• 2004

Ship collisions and grounding continue to occur regardless of continuous efforts to prevent such accidents. With the increasing demand for safety at sea and for protection of the environment, it is of crucial importance to be able to reduce the probability of accidents, assess their consequences and ultimately minimize or prevent potential damages to the ships and the marine environment. Numerical simulations for actual collision problem are conducted with a special attention with respect to finite element size, fracture criteria and material properties, which require a careful consideration to improve the accuracy. A parametric analysis varying colliding speed, angle, design loading condition is conducted using nonlinear finite element analysis method for 46,00 dwt Product/chemical carrier. The relationship between the absorbed energy and indentation are derived quantitatively using the insights observed from this study, and a novel design concept for assessing the anti-collision performance are proposed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1591-1601
• /
• 2013

In this study, It is conducted for novice drivers about driving behavior and psychological characteristics analysis to reduce traffic accident risk and provide the basic data of education program development. Therefore, this study classified by the category-specific characteristics and hazard prediction through survey of the novice driver and unpredictable behavior and psychological characteristics were studied. The novice and general characteristics and driving behavior with vehicle simulators, comparison and analysis of the novice driver traffic safety education basic research direction based on the statistical results. Prediction the results of this study, the Hazard of the driver, speeding, traffic violation, information providing omission, abrupt change, the number of accidents in all areas novice driver is high compared to the general driver. In addition, Novice driver showed a statistically significant level of Hazard compared to the general driver target novice drivers and the general ability to predict Hazard of violation, abrupt change, and a number of traffic accidents were omitted level of speeding and other information providing level drivers all showed similar results. Vehicle simulator. The experimental results showed that novice drivers compared to drivers poorly overall driving performance. It showed a notable difference in the number of collisions, especially novice drivers compared to drivers in complex road traffic conditions due to a lack of driving experience and learning ability are considered.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.3
• /
• pp.19-27
• /
• 2022

Urban Air Mobility is expected to resolve some problems in urban transportation such as traffic congestion and air pollution. Various studies for a large-scale commercialization of UAM are being actively conducted. To that end, the UAM Traffic Management system aims at securing a safety and an efficiency of UAM operations. In this study, a risk assessment model is proposed to evaluate the risk of collision between a vehicle and surrounding obstacles. The proposed model is conceived from the past studies for determining a proper separation distance between parallel runways for their independent operations. The model calculates the risk that the surveillance system fails to meet a target level of safety for a given buffer zone size between a designed route and surrounding obstacles. The model is applied to one of the routes proposed in K-UAM roadmap to evaluate its performances.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.754-756
• /
• 2003

많은 디지털 서명 알고리즘들이 제안되었지만, 내제된 위험 요소들은 여전히 해결되지 않고 있다. 그 중 해쉬 함수의 충돌(Collision)문제가 있는데, 중요한 것은 이 문제로 인해 메시지가 일단 위조되면 어느 누구도 그 메시지의 위법성을 증명할 수 없다는 것이다. 따라서, 본 논문에서는 이 문제를 해결하는 방법에 대해 연구하고 새로운 디지털 서명 방식을 제안한다. 제안된 디지털 서명 방식은 해쉬(Hash) 알고리즘의 안전성 정도에 상관없고 오직 공개키 암호의 안전성에 연관되기 때문에 계산 속도가 빠른 해쉬 알고리즘을 사용할 수 있다. 또한, 이 방식은 기존 디지털 서명 알고리즘과 함께 사용될 수 있어서 E-commerce를 더욱 활성화시킬 것으로 예상된다.

• Journal of Advanced Navigation Technology
• /
• v.19 no.4
• /
• pp.288-298
• /
• 2015

For the commercialization of unmanned aircraft, we must validate the safety of the air/ground collision alert systems (CAS). The validation procedure of CAS requires the flight test which is not only expensive but also dangerous. To alleviate this problem, we need the simulation based validation process for the CAS. We developed an integrated UAV simulation (IUS) environment which interconnect the flight simulator, the Matlab/Simulink, and a target avionics simulation model. We developed the collision warning module of the TCAS and tested using IUS and flight encounter models. Using IUS, we can evaluate the performance and reliability of a target avionic system at the preliminary design stage of a development life cycle.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.813-823
• /
• 2020

Purpose: In order to maximize the stability and productivity of the work through simulation prior to high-risk facilities and high-cost work such as dismantling the facilities inside the reactor, we intend to use digital twin technology that can be closely controlled by simulating the specifications of the actual control equipment. Motion control errors, which can be caused by the time gap between precision control equipment and simulation in applying digital twin technology, can cause hazards such as collisions between hazardous facilities and control equipment. In order to eliminate and control these situations, prior research is needed. Method: Unity 3D is currently the most popular engine used to develop simulations. However, there are control errors that can be caused by time correction within Unity 3D engines. The error is expected in many environments and may vary depending on the development environment, such as system specifications. To demonstrate this, we develop crash simulations using Unity 3D engines, which conduct collision experiments under various conditions, organize and analyze the resulting results, and derive tolerances for precision control equipment based on them. Result: In experiments with collision experiment simulation, the time correction in 1/1000 seconds of an engine internal function call results in a unit-hour distance error in the movement control of the collision objects and the distance error is proportional to the velocity of the collision. Conclusion: Remote decomposition simulators using digital twin technology are considered to require limitations of the speed of movement according to the required precision of the precision control devices in the hardware and software environment and manual control. In addition, the size of modeling data such as system development environment, hardware specifications and simulations imitated control equipment and facilities must also be taken into account, available and acceptable errors of operational control equipment and the speed required of work.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.271-274
• /
• 2009

강관의 내부에 콘크리트를 충전한 콘크리트 충전 강관 구조(CFT 구조, Concrete Filled Steel Tubular Structure)는 강재와 콘크리트의 단점을 상호 보완하고, 장점을 극대화 할 수 있다는 이점 때문에 최근 실제 구조물의 시공에 적용하는 사례가 증가하고 있는 추세이다. 이와 같은 CFT 거더의 장점을 살리면서 CFT 거더보다 더 뛰어난 경제적, 구조적 효율성을 얻기 위해 기존의 CFT 구조에 아치 형식과 프리스트레스를 도입한 CFTA(Concrete Filled and Tied Tubular Arch) 거더에 관한 연구가 현재 진행중이다. 본 연구에서는 CFTA 거더의 현장 실험과의 비교를 위해 ABAQUS 6.5-1을 이용하여 CFTA 거더의 유한요소 해석을 수행하였고, 이를 바탕으로 구조물의 선형거동을 분석하였다. 또한 구조물의 위험도 분석을 위해 본 구조물의 가장 약점으로 지적되고 있는 외부로 노출되어 있는 긴장재의 차량 충돌에 의한 사고를 가정하여 이를 고려한 유한 요소 해석을 수행하여 CFTA 구조물의 동적 및 정적 안전성 평가를 수행하고 그 결과를 분석하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.48-50
• /
• 2013

해상에서의 선박충돌사고 예방에 대한 연구가 IMO를 중심으로 꾸준히 지속되어 왔다. 이러한 항해장비 중에서 AIS는 중요한 역할을 수행하여 왔다. AIS 장비를 통하여 전송되는 정보에는 정적 정보와 동적 정보 및 항해 관련 정보로 구분할 수 있다. 정적 정보에는 MMSI, 선명, 호출부호, IMO번호, 선박길이 및 선폭, 선종 등 선박이 이동해도 변하지 않는 정보로 구성되고, 동적 정보에는 선박의 위치, 시간, 대지침로, 대지속력, 선수방위, 항행상태, ROT(Rate of Turn) 등 선박이 이동함에 따라 변화하는 정보로 구성된다. 그리고 항해 관련 정보에는 흘수, 위험화물, 목적지, ETA 등이 해당된다. 하지만, 이러한 정보들에 대한 활용도의 우선순위 및 정보의 적정성 등에 대해서는 아직까지 조사된 것이 없는 실정이다. 본 연구에서는 AIS 장비의 실 사용자를 대상으로 한 설문조사 및 분석을 통하여 AIS 송수신 정보들에 대한 활용도의 우선순위 및 정보의 적정성 등에 대해 검토해보고 필요시 개선 필요성을 제시하며 아울러 AIS 장비의 개선점도 검토해 보고자 한다.