• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.2
• /
• pp.203-212
• /
• 2010

Water spray cooling has been widely used in a variety of industrial applications. The present study concentrated on quantitative measurements of the heat flux and heat transfer coefficient by water spray as it impinges on the rough surface of a hot steel plate at $900^{\circ}C$. A novel experimental technique was developed for a hightemperature heat flux gauge with a test block, cartridge heaters, and thermocouples that was used to measure the surface heat flux information on the hot steel plate for local heat flux measurements. The roles of the surface roughness on heat transfer are presented in this paper for well-characterized four rough surfaces with average rms roughness heights of $40-80{\mu}M$. The results show that the local heat transfer for rough surfaces is higher than that for a smooth surface. Heat transfer can be significantly increased by the presence of surface roughness elements, which can disrupt the thin thermal boundary layer. In addition, the heat transfer enhancement mechanism on a rough surface can be investigated by a different boiling regime.

• Explosives and Blasting
• /
• v.29 no.2
• /
• pp.1-12
• /
• 2011

Progressive collapse analyses of high-rise buildings subjected to abnormal loading such as fires, impacts, earthquakes, typhoon, bomb blasts etc. are intended. However it is difficult to perform collapse experiments of the real scale building to determine the capacity of the structure under an extreme loading events. In this study, collapse behavior of a 15 story RC structure building loaded by external explosion pressures were simulated using Extreme Loading Structures (ELS) software. The standoff distance between the RC building and explosives of 1500 kg was 1, 2, 5, 10, and 15 meters. The explosive demolition analysis techniques based on removal of partial support structures following blast scenario was adapted to investigate the transition process of progressive collapse-local damage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.2
• /
• pp.140-145
• /
• 2013

This paper proposes the high speed LDPC decoder structure base on the DVB-S2. Firstly, We study the solution to avoid the memory conflict. For the high speed decoding process the decoder adapts the HSS(Horizontal Shuffle Scheduling) scheme. Secondly, for the high speed decoding algorithm normalized Min-Sum algorithm is adapted instead of Sum-Product algorithm. And the self corrected is a variant of the LDPC decoding that sets the reliability of a Mc${\rightarrow}$v message to 0 if there is an inconsistency between the signs of the current incoming messages Mv'${\rightarrow}$c and the sign of the previous incoming messages Moldv'${\rightarrow}$c This self-corrected algorithm avoids the propagation on unreliable information in the Tanner graph and thus, helps the convergence of the decoder.Start after striking space key 2 times. Lastly, and this paper propose the optimal hardware architecture supporting the high speed throughput.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.281-287
• /
• 2007

The Bluetooth technology represents an attractive approach to enable short distance wireless connectivity. The Bluetooth standard operates at the 2.4 GHz ISM band and offers the advantage of establishing ad hoc networks, called piconet and scatternet. The spread of Bluetooth implementation in consumer products opens up a new short range wireless networking applications. Bluetooth MAC avoids packet collision within a piconet by simple time multiplexing. But lack of synchronization among independent neighboring piconets introduces packet overlapping within a time slot. In this paper, the wireless network throughput of Bluetooth packet transmission system applying the pure-ALOHA and slotted-ALOHA MAC is investigated according to the impact of channel environment. From the obtained results, the throughput of the Bluetooth MAC protocol shown to offer good performance in wireless channel, and the results are useful for the implementation of Bluetooth networks.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.250.1-250.1
• /
• 2010

최근 석유공급 불안정성과 이산화탄소 배출 규제 움직임에 대응하기 위한 수단으로 바이오연료의 공급이 전세계적으로 증가하고 있다. 이와 같은 바이오디젤의 보급 활성화는 식물성 기름의 가격 상승과 수급 불안정 문제, 그리고 식량자원과의 충돌 문제를 야기하고 있다. 국내 바이오디젤 생산 원료로 사용되는 대두, 유채, 해바라기, 팜 등은 모두 식용시장과 수급 균형을 형성하고 있어 바이오디젤의 생산이 증가하게 되면 식용 오일 시장의 수급균형이 깨져 오일곡물 가격의 변동을 초래하게 될 것이다. 과거에는 수거비용을 들여 폐기하던 폐식용유 마저 이제는 돈을 주고 구입해야하는 실정에 다다랐다. 바이오디젤 생산비의 70~80%를 차지하는 원료유의 부족 현상에 따라 바이오디젤 업계에서는 soapstock, trapped grease, 폐식용유 등의 저급유지 활용 방안을 강구하고 있으며 자트로파와 같은 비식용 작물의 해외플랜테이션도 진행하고 있다. 본 연구에서는 커피찌거기에 남아 있는 오일을 속슬렛추출장치를 이용해 추출하고 전이에스테르화 반응을 수행하여 반응 특성과 커피오일 바이오디젤의 지방산 조성을 알아보고 바이오디젤 원료유로서의 사용가능성에 대해 알아보았다. 석유에테르를 용매로 속슬렛 추출장치를 이용해 추출시 원료대비 약 17%(w/w)의 오일을 추출할 수 있었다. 추출된 오일의 산가는 18.79mgKOH/g으로 매우 높아 직접 전이에스테르화 반응이 불가능하다. 고체 산 촉매 하에서 전처리 반응을 실시하여 유리지방산을 전환 제거한 후 염기촉매를 이용해 전이에스테르화 반응을 진행한 결과 약 80%의 바이오디젤(FAME) 함량을 얻을 수 있었다. 지방산 조성 분석 결과 리놀레익산(Linoleic acid, C18:2), 올레익산(Oleic acid, C18:1), 팔미틱산(Palmitic acid, C16:0)이 대부분을 차지하며 이 중에서도 리놀레익산이 44.17%로 가장 많은 함량을 보였다. 이는 커피찌꺼기 추출 오일이 바이오디젤 원료유로 활용 가능성을 나타내는 결과로, 색소성분 등의 불순물을 효율적으로 제거하여 증류정제 전단계에서의 바이오디젤 순도와 생산 수율을 증대시키기 위한 추가 연구가 필요한 것으로 판단된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.2
• /
• pp.177-185
• /
• 2013

A new theoretical derailment coefficient model of wheel-climb derailment is proposed to consider the influence of wheel unloading. The derailment coefficient model is based on the theoretical derailment model of a wheelset that was developed to predict the derailment induced by train collisions. Presently, in domestic derailment regulations, a derailment coefficient of 0.8 is allowable using Nadal's formula, which is for a flange angle of $60^{\circ}$ and a friction coefficient of 0.3. However, theoretical studies focusing on different flange angles to justify the derailment coefficient of 0.8 have not been conducted. Therefore, this study theoretically explains a derailment coefficient of 0.8 using the proposed derailment coefficient model. Furthermore, wheel unloading of up to 50% is accepted without a clear basis. Accordingly, the correlation between a wheel unloading of 50% and a derailment coefficient of 0.8 is confirmed by using the proposed derailment coefficient model. Finally, the validity of the proposed derailment coefficient model is demonstrated through dynamic simulations.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.56-62
• /
• 2008

Modern microprocessors must deliver high application performance, while the design process should not subordinate power. In terms of performance and power tradeoff, the instructions window is particularly important. This is because a large instruction window leads to achieve high performance. However, naive scaling conventional instruction window can severely affect the complexity and power consumption. This paper explores an architecture level approach to reduce power dissipation. We propose a low power issue logic with an efficient tag translation. The direct lookup table (DTL) issue logic eliminates the associative wake-up of conventional instruction window. The tag translation scheme deals with data dependencies and resource conflicts by using bit-vector based structure. Experimental results show that, for SPEC2000 benchmarks, the proposed design reduces power consumption by 24.45% on average over conventional approach.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.91-99
• /
• 2014

The main game architectures for multiplayer online games are the traditional client-server architectures, multi-server architectures and P2P(peer-to-peer) architectures. P2P architectures, due to their distributed and collaborative nature, have low infrastructure costs and can achieve high scalability as well as fast response time by creating direct connections between players. However, P2P architectures face many challenges. Distributing a game among peers makes maintaining control over the game more complex. These architectures also tend to be vulnerable to churn and cheating. Providing consistency control in P2P systems is also more difficult since conflicting updates might be executed at different sites resulting in inconsistency. In order to avoid or correct inconsistencies, most multiplayer games use a primary-copy replication approach where any update to the object has to be first performed on the primary copy. This paper presents the primary-copy model with the update dissemination mechanism that provides consistency control over an object in P2P architectures for multiplayer online games. The performance for this model is evaluated through simulation experiments and analysis.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.3
• /
• pp.223-228
• /
• 2009

By the typhoon "MAEMI" in 2003, a lot of marine accidents such as stranding, collision etc. occurred to the vessels at anchor in "JINHAE MAN" which was considered one of the most safe sheltering anchorage in Korea. These accidents resulted from the dragging of anchor by the strong winds. It needs to compare the external forces with the holding powers of anchors to estimate if the anchor will be dragged or not. However, the calculation of the force by the wind on the ship, in particular, on the wind pressure area which changes by the swinging of her bow is not yet set on a thesis. Therefore, this paper verified that how many times the front wind pressure area should be applied to calculate the force by the wind on the ship at anchor by comparing and analyzing the numerical calculation with, the actual ship's data which was really dragged by the strong wind.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.6
• /
• pp.1-10
• /
• 2001

In this paper, we propose a synchronous reservation protocol that is efficient for supporting variable sized messages in a wavelength division multiplexing (WDM) based local network using a passive star topology. A. control channel is used to coordinate transmission on data channels. Time is slotted with fixed-sized slots. The network can accommodate a variable number of nodes, and can operate independently of the change of the number of nodes. So, any 'new' node can join the network anytime without network re-initialization. Moreover, with the protocol, we can avoid data channel and destination conflicts. We analyze the performance by using EPA method according to the variation of the end to end propagation delay with respect to one slot time, and validate the results by simulation.