• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.848-857
• /
• 2011

Due to the advantages of a conveniet, inexpensive installation, flexibility, and scalability, Wireless AMR systems are recently preferred over wired AMR systems. However, a multi-hop supported AMR network, which generally covers large areas, may create energy wastage problem, energy unbalance, and high interference hazard due to a large amount of concurrent-intensive metering data in the network. Therefore in this paper we propose a novel data gathering method which can solve abovementioned problems as well as conserve energy, by reducing the traffic in the network. In addition, the experimental results demonstrate that the proposed scheme shows superior performance to the conventional data transmission method.

• Journal of the Society of Disaster Information
• /
• v.12 no.3
• /
• pp.279-285
• /
• 2016

Road sides safety barrier system is the last safety during traffic accident. The structural performance of a roadside safety barrier should be kept above expectations. It is possible to protect the passenger's life. End treatment part is installed in the end of the barrier it prevents a phenomenon in which for the vehicle for the guardrail during a vehicle collision it is facility of the absorbing of car crashed impact. By repeated analysis through computer simulation for improving the vehicle crash it will be able to develop crash barriers to respond appropriately to various parameters.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.5 s.143
• /
• pp.472-478
• /
• 2005

From a rapid cooling to a slow cooling in the actual cooling process in shipyards, the phase of steel becomes martensite, bainite, ferrite, and pearlite. In order to simulate the cooling process, heat transfer analysis was performed considering the effects of impinging water jet, film boiling, and radiation. From above simulation it is possible to find the cooling speed at the inherent strain region and volume percentage of all phases in that region. By the suggested method based on the precise material properties calculated from volume percentage of all phases, it will be possible to predict the plate deformations by line heating more precisely. It is verified by comparing with some experimental results that the present method is very effective and efficient.

• Journal of the Korea Convergence Society
• /
• v.12 no.1
• /
• pp.185-191
• /
• 2021

A powder metallurgy process with granules is the manufacturing technology that can achieve higher-density sintered parts than conventional powder metallurgy processes. However, there is a disadvantage in that the production cost increases significantly due to the additional granulation step. High granule productivity must be guaranteed for affordable material costs in this manufacturing technology. This paper performed a series of scattering, collision, and adhesion simulations of agglomerated powders to investigate the characteristics of granulation process affecting the manufacturing yield rate. The results of this simulation-based convergence study can contribute to improving productivity in the metal powder spray granulation process.

• Annual Conference of KIPS
• /
• 2007.11a
• /
• pp.127-130
• /
• 2007

테이블 탑 디스플레이는 인간과 컴퓨터간의 자연스러운 상호작용을 위하여 개발된 인터페이스 중 하나이다. 이것은 인간의 직관적인 도구인 손을 이용하여 컴퓨터와 상호작용을 하기 때문에 기존의 마우스를 이용하는 시스템에 비해 사용자의 흥미를 더욱 유발시킬 수 있으며 따라서 현재 이러한 시스템을 활용하기 위한 많은 컨텐츠들이 개발되고 있다. 본 논문에서는 테이블 탑 디스플레이 인터페이스에서 자연스러운 물체의 상호작용을 지원하는 물리엔진을 구현하였다. 이를 위해 테이블 탑 평면상에서 물체의 선택을 가능하게 하는 2차원 관점의 3차원 변환을 지원하고, 물체가 이동할 때와 물체와 물체의 충돌 시 나타나는 물리현상을 벡터연산을 통해 구현하였고, 네트워크를 통해 다중 사용자 환경에서 물리엔진이 구동되도록 하였다. 본 논문에서는 테이블 탑에서 이와 같은 기능들의 구현을 에어하키 게임을 통해 보인다. 에어 하키는 테이블 위에 퍽을 놓고 라켓으로 퍽을 쳐서 상대방의 골문에 넣어 점수를 얻는 게임이다. 본 논문에서 제안한 물리엔진을 이용함으로써 사용자는 보다 실감나는 인터페이스를 느낄 수 있다.

• Journal of The Korean Association For Science Education
• /
• v.43 no.3
• /
• pp.253-263
• /
• 2023

This study explored the discrepancy between the text of a teacher's guide about straight and reflective light and the content knowledge of pre-service elementary teachers. A total of 455 questions and 543 answers generated by 279 pre-service elementary teachers after reading a 'Shadow and Mirror' unit in the teacher's guide were analyzed. The questions were classified according to the types of concepts and discrepancies, and the answers were analyzed for accuracy. The results of analyzing the concepts of questions revealed that the pre-service elementary teachers were most curious about the shadow in the straight concept, the mirror image in the reflection concept, and the light source in other concepts. The questions with a low correct answer rate due to incorrect- or non-answers, such as those concerning the superposition principle of light by reflection, the principle of experimental tools, and images by lenses, were only partially or not included in the teacher's guide. When the questions were classified according to the type of discrepancy, the frequency of questions due to knowledge deficit was higher than that due to knowledge clash. This demonstrates that the concepts that teachers need to know must be supplemented with the contents of the teacher's guide. Discrepancies due to knowledge clashes are often caused by conflicts between what is experienced in everyday life and what is presented in textbooks. Therefore, it is necessary to reduce the discrepancy between the texts of the teacher's guide and the knowledge of pre-service elementary teachers by including the differences between the actual context of everyday life and the context of the textbook in the teacher's guide.

• Korean Security Journal
• /
• no.46
• /
• pp.31-62
• /
• 2016

This study is about the phenomenological study of bodyguards' ethical dilemmas. Through this study, the meaning and essence of bodyguards' ethical dilemmas will be analyzed based on empirical facts. The purpose of this study is to provide basic information of the prevention and solutions for their ethical dilemmas and to understand and research the process and the essentials of them. To achieve this goal of the study, seven bodyguards who experienced ethical dilemmas working more than five years are selected as objects of the study. Colaizzi's six stage method are applied into this study so information gathered through interviews and questionnaire from 0ctober 1st, 2015 to November 20th, 2015 is analyzed. From the process of this research, these following conclusions are drawn considering validity of this study and ethical things. As a result, bodyguards' ethical dilemmas are divided into six centric meanings and 20 thematic statement. First, the centric meaning is conflict factors and the themes are discordance of pre-practice, regulatory or procedure problems, communication about sturcture and job and service disagreement. Second, the centric meaning is limited professional roles and the themes are institutional custom, decision making, priorities. Third, the centric meaning is difficulties of circumstantial judgement at work places and the themes are ambiguity of decision, conflict of knowledge, experience and opinion. Forth, the centric meaning is reasonable self-defense and the themes are lack of responsibility, rationalization, intentional negligence and sense of shame. Fifth, the centric meaning is difficulties of social network and the themes are the relationships between subordinates and superiors, the role of a moderator, uncooperative work and unpleasant sayings and doings. Sixth, the centric meaning is keeping secrets and the themes are burried for and illegal practice.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.2
• /
• pp.151-171
• /
• 2012

The Permo-Triassic Songrim orogeny in the Korean peninsula was a major tectonic event involving complicated continental collisions at the eastern margin of Eurasia. Based on the previous studies on the metamorphic and deformations features of the Songrim orogeny, this paper presents metamorphic and structural characteristics and timing of the Songrim orogeny in the Taebaeksan basin, and discuss about correlation of the tectono-metamorphic evolution of the Taebaeksan basin with the Okcheon basin and the Imjingang belt with a combined analysis of bulk crustal shortening direction, metamorphic P-T and T-t (time) paths. The metapelites in the Pyeongan Supergroup in the northeastern margin of the Taebaeksan basin have experienced lower-temperature/medium-pressure (LT/MP) regional metamorphism followed by high-temperature contact metamorphism due to the Jurassic granite intrusion. The earlier LT/MP regional metamorphism produced two loops of clockwise P-T-d (deformation) paths combined with four deformation events ($D_1-D_4$). The first loop concomitant with $D_1$ and $D_2$ occurred at $400-500^{\circ}C$, 1.5-3.0 kbar, and related with growth of syn-$D_1$ chloritoid and andalusite, post-$D_1$ margarite, Ca-rich syn-$D_2$ or post-$D_2$ plagioclase. The second loop accompanying $D_3$ and $D_4$ occurred at $520-580^{\circ}C$, 2.0-6.0 kbar, and associated with the growth of syn-$D_3$ garnet and staurolite, and syn-$D_4$ and/or post-$D_4$ andalusite porphyroblasts. Furthermore the syn-$D_1$ chloritoid and andalusite porphyroblasts grew during E-W bulk crustal shortening, whereas the syn-$D_3$ garnet and staurolite, and the syn-$D_4$ and/or post-$D_4$ andalusite porphyroblasts have grown under N-S bulk crustal shortening. The similarity in the characteristics and timing of the metamorphism and bulk crustal shortening directions between the Okcheon and Imjingang belts suggest that the peak metamorphic conditions tend to increase toward the western part (Imjingang belt and southwestern part of the Gyeonggi Massif) from the eastern part (Taebaeksan basin). The E-W bulk crustal shortening influenced the eastern part of the Okcheon belt, whereas the N-S bulk crustal shortening resulted in strong deformation in the Imjingang and Okcheon belts. Consequently, the Permo-Triassic Songrim orogeny in the Korean peninsula is probably not only related to collision of the North and South China blocks, but also to the amalgamation of terrane fragments at the eastern Eurasia margin (e.g., collision of the Sino-Korean continent and the Hida-Oki terrane).

• Journal of the Korean Arthroscopy Society
• /
• v.5 no.2
• /
• pp.63-68
• /
• 2001

Purpose : To propose the diagnosis, 'hypertrophy of the anterior cruciate ligament(ACL)', and its clinical, radiological and pathological characteristics. Materials & Method : Since Dec. 1995, we have experienced 10 patients(12 knees) with hypertrophy of the ACL. There were 2 males and 8 females, and the age of the patients ranged from 35 to 67 years. Characteristics of clinical, radiological and pathological findings were analysed. Results : The chief complaint was insidious onset of dull pain on the knee which became worse with activity. The constant physical finding was painful limitation of full extension of the knee. Sagittal MR images showed diffuse swelling of the ACL, similar finding that could be seen in acute ACL tear. Arthroscopically, noted was a marked enlargement of the ACL causing notch impingement. Biopsies of the hypertrophied ACL showed increased collagenous tissue with variable degree of myxoid degeneration. With partial excision of the hypertrophied ACL with or without notchplasty, the symptoms improved in all. Conclusion : Hypertrophy of the ACL, a newly proposed diagnosis, should be considered be determining the cause of the painful knee, and further study should be done about its pathogenesis.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.3
• /
• pp.171-178
• /
• 2020

In this study, we develop MPI-OpenMP hybrid parallelization for multibody peridynamic simulations. Peridynamics is suitable for analyzing complicated dynamic fractures and various discontinuities. However, compared with a conventional finite element method, nonlocal interactions in peridynamics cost more time and memory. In multibody peridynamic analysis, the costs increase due to the additional interactions that occur when computing the nonlocal contact and ghost interlayer models between adjacent bodies. The costs become excessive when further refinement and smaller time steps are required in cases of high-velocity impact fracturing or similar instances. Thus, high computational efficiency and performance can be achieved by parallelization and optimization of multibody peridynamic simulations. The analytical code is developed using an Intel Fortran MPI compiler and OpenMP in NURION of the KISTI HPC center and parallelized through MPI-OpenMP hybrid parallelization. Further parallelization is conducted by hybridizing with OpenMP threads in each MPI process. We also try to minimize communication operations by model-based decomposition of MPI processes. The numerical results for the impact fracturing of multiple bodies show that the computing performance improves significantly with MPI-OpenMP hybrid parallelization.