• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5A
• /
• pp.369-378
• /
• 2011

In this paper, the response analysis of RC(Reinforced Concrete), SC(Steel-Plate Concrete) containment buildings subjected to a large aircraft impact is performed using Autodyn-3D as Hydrocode. Until now, the impact load in the analysis of aircraft impacts has been applied to target structures at the local area by using the impact load-time history function of Riera. However in this paper, the results of aircraft crash are analyzed by using an aircraft model similar to Boeing 767 and verified by comparing the generated history of the aircraft crash against the rigid target with another history by using the Riera's function. To estimate the resistivity of the impact, the response and safety of SC containment buildings, this study is performed by comparing the four cases of plane concrete, reinforced concrete, bonded containment liner plate at reinforced concrete, and SC structure. Thus, the different behaviors between SC and RC structures when they are subjected to the extreme impact load could be anticipated. Consequently, the improved safety is expected by replacing RC structure with SC structure for nuclear power plants.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.675-682
• /
• 2015

Current design codes such as AASHTO LRFD or Korean Highway Bridge Design Code recommend of using static force for designing bridge column against vehicle collisions. However, there was an accident that the bridge was collapsed shortly after vehicle impact on bridge pier in Nebraska(near Big Spring, 2003). It was found that the second largest cause of bridge collapse is collision after hydraulic causes. It can be thought that the possibility of truck-bridge collision are getting increasing as the size of truck increases and traffic condition are becoming improved. However, dynamic behavior under the impact loading seldom considered in bridge design procedure due to computational cost and time. In this study, in order to reduce the computational cost for dynamic impact analysis, model reduction method was developed. Obtained results of residual displacement were compared with the results of direct impact simulations.

• The KIPS Transactions:PartA
• /
• v.15A no.5
• /
• pp.287-294
• /
• 2008

A tag collision arbitration algorithm for RFID passive tags is one of the important issues for fast tag identification, since reader and tag have a shared wireless channel in RFID system. This paper suggests Hyper-Hybrid Query Tree algorithm to prevent the tag-collisions. The suggested algorithms determine the specified point in time for tag to transfer ID to reader by using value 1 of the upper 3 bit based on Query Tree. Also, because the transferred upper 3 bits of tag is different depending on the time of transfer, it is possible to predict in the suggested Algorithm. In the performance evaluation through simulation, it shows the suggested algorithm has higher performance in the number of queries compared to other Tree-based protocols.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.1191-1194
• /
• 2007

이동 애드혹 네트워크 (MANET)는 기지국과 같은 인프라 없이 구성된 무선 네트워크로 멀티 홉 무선통신을 수행할 수 있다. MANET에서 경로 끊김이 발생하는 이유는 일반적으로 경로를 설정하고 있는 노드들의 이동이나 hidden terminal 과 같은 무선 채널 충돌 때문이다. 무선 채널 충돌처럼 노드들의 위상과 상관없이 패킷들의 충돌 때문에 경로 끊김이 발생하는 현상은 불필요한 경로 재설정이 유발된다. 그리고 이에 따른 제어 메시지의 과도한 생성은 전체 네트워크의 오버헤드를 증가시켜 성능 감소로 이어진다. 특히 일반적으로 MANET에서 사용하는 reactive 방식의 라우팅 프로토콜을 사용하는 네트워크에서는 더 많은 성능 감소가 일어나게 된다. 본 논문에서는 MANET의 이러한 불필요한 경로 재설정을 방지하여 자원을 보다 효율적으로 사용할 수 있는 노드 이동 감지 기법을 제안한다. 이 기법은 HELLO 메시지와 이웃 노드 테이블을 이용하여 무선 채널 충돌과 같은 현상을 예측하고 효율적으로 대처할 수 있게 한다. 성능 분석 결과, 본 논문에서 제안한 노드 이동 감지 기법이 기존 방법들에 비해 패킷 전송률과 라우팅 오버헤드 측면에서 우수한 성능 결과를 보였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.5C
• /
• pp.454-464
• /
• 2002

In the ATM-PON (Asynchronous Transfer Mode-Passive Optical Network), the downstream cell transmitted by an OLT is broadcast to all ONUs. The ONU receives selectively its own cells by VP filtering. On the other hand, the upstream cell can be transmitted by ONU in the case of receiving a grant from the OLT. After providing the grant to an ONU, the OLT expects the arrival of a cell after an elapse of the equalized round trip delay. ITU-T G.983.1 recommends that one bit error is allowed between the expected arrival time and the actual arrival time at the OLT. Because the ONU processes the different delay to each type of grant (ranging, user cell, and mimi-slot grant), it is not simple to design the transmission part of ONU. In this paper, we implement a grant processor which provides the delay accurately in the ONU TC chip with the FPGA. For the given equalized delay, it deals with the delay for the cell, the byte, and the bit unit by using the shift register, the byte counter, and the D flip-flop, respectively. We verify the operation of the grant processor by the time simulation and the measurement of the optical board output.

• Journal of Navigation and Port Research
• /
• v.26 no.5
• /
• pp.537-542
• /
• 2002

Recently, an automatic crane control system is required with high speed and rapid transportation. Therefore, when container is transferred from th intial coordinate to the finial coordinate, the container paths should be built in terms of the least time and no swing. So in this paper, we calculated the anti-collision path for avoiding collision in its movement to the finial coordinate. And we constructed the neural network predictive PID (NNPPID) controller to control the precise navigation. The proposed predictive control system is composed of the neural network predictor, PID controller, neural network self-tuner which yields parameters of PID. Analyzed crane system through simulation, and proved excellency of control performance than other conventional controllers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.843-850
• /
• 2020

The purpose of this study is to evaluate the structural risk and weakness of a railway tank car through nonlinear collision analysis according to overseas collision safety standards. The goal is to propose a crash safety design guideline for railway tank cars for transporting dangerous goods in Korea. We analyzed the buffer impact test procedure of railway freight cars prescribed in EN 12663-2 and the tank puncture test criteria prescribed in 49CFR179. A nonlinear finite element model according to each standard was modeled using LS-DYNA, a commercial finite element analysis solver. As a result of the buffing impact test simulation, it was predicted that plastic deformation would not occur at a collision speed of 6 km/h or less. However, plastic deformation was detected at the rear of the center sill and at the tank center supporting the structure at a collision speed of 8 km/h or more. As a result of a head-on test simulation of tank puncture, the outer tank shell was destroyed at the corner of the tank head when 4% of the kinetic energy of the impacter was absorbed. The tank shell was destroyed in the area of contact with the impacter in the test mode analysis of tank shell puncture when the kinetic energy of the moving vehicle was reduced by 30%. Therefore, the simulation results of the puncture test show that fracture at the tank shell and leakage of the internal material is expected. Consequently, protection and structural design reinforcement are required on railway tank cars in Korea.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.337-339
• /
• 2005

무선 링크를 사용하는 모바일 기기는 모바일 기기의 이동 혹은 무선 링크의 충돌, 부족한 대역폭등 모바일 기기의 외적 환경 변화에 의해 잦은 단절과 실패를 겪게 된다. 이러한 환경 변화를 예측할 수 있다면, 모바일 기기 내의 어플리케이션이 상황에 따른 적절한 대응을 할 수 있다. 본 논문에서는 어플리케이션이 링크의 환경 변화에 적응할 수 있도록, 링크의 상태 정보를 이용하여 상태를 예측할 수 있는 가중치 알고리즘과 상태 변화의 정도를 추정할 수 있는 기울기 값을 이용한 Watermark 기반의 링크 상태 추적 알고리즘을 제안한다.

• Aerospace Engineering and Technology
• /
• v.7 no.2
• /
• pp.1-10
• /
• 2008

The Bird strike to small aircraft has not been an issue because of it's low speed and usage as a private aircraft. So, the compliance of the bird strike regulation is limited to large fixed-wing aircraft such as the commuter category in FAR Part 23 and the civil aircraft in FAR Part 25, generally. However, the forecast of dramatic increasing of VLJ(Very Light Jet) and (light time of general aviation due to Air-taxi for the point to point transportation, would rise up the need of bird strike regulations and a safety enhancement in normal and utility categorized aircraft. In this study, the safety enhancement concept using a crushable foam for the bird strike to small aircraft wing leading edge, and the evaluation about the safety of the bird strike to small aircraft are proposed using the explicit finite element analysis.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.783-790
• /
• 2017

An acceptable proximity assessment collision probability is widely considered to be less than $10^{-4}$ in maritime traffic safety audit schemes. In the 1970s, Fujii, Macduff and colleagues introduced various models for collision probability of aberrancy in the community. Although existing studies ensured acceptable proximity collision probability, around $10^{-4}$, they were constrained by assumptions. A lack of support for the proximity probability criterion has been investigated in this study for practical use. The appropriate proximity probability for different size vessels in both straight and curved lanes has been analyzed based on GICOMS data. As a result, reasonable proximity collision probabilities were determined for various vessel traffic conditions. Accordingly, necessary improvements in the maritime traffic system have been suggested in consideration for various maritime traffic situations and conditions.