• Journal of KSNVE
• /
• v.8 no.4
• /
• pp.749-756
• /
• 1998

기어에서 충격성 진동 및 소음은 치차의 이상과 연관이 있다. 따라서 충격 진동 및 소리는 기어의 이상 진단에 사용되어 질 수 있다. 또한 이들 충격파를 조기에 정확하게 탐지하여 기어의 이상을 진단하면 완전 파손을 방지할 수 있다. 그러나 주변 소음 및 노이즈 신호 때문에 객관적이 충격파의 탐지가 어렵기 때문에, 본 논문은 이러한 숨겨진 충격 신호를 능동 신호 처리 기법을 이용하여 조기에 찾아내고 이것을 시간-주파수 영역에서 해석하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.118-131
• /
• 1995

The shock fracture analysis for the structures of navy vessels subject to underwater explosions or of high speed vessels frequently subject to impact loads has been carried out in two steps such as the global or macro analysis and the fine or micro analysis. In the macro analysis, Doubly Asymptotic Approximation(DAA) has been applied. The three main failure modes of structure members subject to strong shock loading are late time fracture mode such as plastic large deformation mainly due to dynamic plastic buckling, and the early time fracture mode such as tensile tearing failure or transverse shear failure. In this paper, the tensile tearing failure mode is numerically analyzed for the micro analysis by calculating the dynamic stress intensity factor $K_I(t)$, which shows the relation between stress wave and crack propagation on the longitudinal stiffener of the model. Especially, in calculating this factor, the numerical caustic method developed from shadow optical method of caustic well known as experimental method is used. The fully submerged vessel is adopted for the macro analysis at first, of which the longitudinal stiffener, subject to early shock pressure time history calculated in macro analysis, is adopted for the micro analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.206-206
• /
• 2003

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.6
• /
• pp.663-668
• /
• 2014

Mechanical and electrical devices in various forms are used in many different fields. These can be exposed to external environmental factors such as shock. Therefore, a shock test machine is commonly used to test these devices and evaluate their shock resistance. In this test, the break-down or permanent deformation and malfunction of inner parts due to a high stress or acceleration can be evaluated. As part of a shock test machine, a velocity generator is needed to create shocks between objects. In this study, a hydraulic velocity generator was conceptually designed and an AMESim model was developed to simulate the velocity under different conditions. Simulation results using this model were compared with the test results from a reduced-size velocity generator, and we designed a velocity generator that fits the target payload and velocity using the simulation results.

• Composites Research
• /
• v.36 no.1
• /
• pp.25-31
• /
• 2023

Composite structures have been designed by stacking the laminae with different stacking angles to meet the required mechanical performance. Although the induced stresses on the composite structures under the external loads usually differ depending on the location, we determined the stacking sequence based on the maximum stress, which leads to low efficiency and generally is not the optimum design. Recently, piecewise integrated composites (PICs) were suggested for solving this inefficiency. PICs assume the perfect bonding between adjacent pieces, but this is ideal and hard to accomplish. Therefore, the overlap at the boundary is essential to prevent separation from each other. In this study, we investigated the effect of the overlap design on the impact failure mode of PIC plates. We fabricated the sample composite plates with different overlap designs using the fast curing carbon prepreg and conducted the impact tests according to ASTM D 7136. We found that PICs had different failure modes according to the overlap design, which lead the changes of absorbed impact energies as well as impact load curves.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.89-92
• /
• 2002

Traditionally unidirectional laminated composite which are characterized by high specific stiffness and strength were used for structural application. But theses composites are highly susceptible to impact damage because of lower transverse tensile strength. The main failure modes of laminated composite are fiber breakage, matrix cracking and delamination for low velocity impact. The modified failure criterions are implemented to predict these failure modes with finite element analysis. Failure behavior of the woven fabric laminated composite which is used in forehead part of subway to lighten weigh has been studied. The new failure criterions are in good agreement with experimental results and can predict the failure behavior of the woven fabric composite plate subjected to low velocity impact more accurately.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.4
• /
• pp.86-92
• /
• 2008

This paper is to investigate the behavior of linear static structure stress, the fatigue and experimental shock fracture far engine base in the Auxiliary Power Unit to resolve its restricted electrical power problem. The shock fracture test was experimentally made under MIL standard criteria. The numerical results by finite element method had a good agreement with those from the shock test. The design data of predicting the fracture at the initial crack and the damage behavior of structure with shock and vibration load in the battle field can be obtained from shock test. In the functional shock test, the crack at the side parts of the engine base was found at peak acceleration of 40g.

• Composites Research
• /
• v.26 no.2
• /
• pp.116-122
• /
• 2013

In this study, impact behavior of aluminium and glass-fiber structure is studied under low impact velocity. Compression test is carried out to investigate the compressive strength of the specimens. The degree of damage is observed using microscopy and compared with the experimental analysis data. The maximum load capacity, impact strength and elastic energy of glass-fiber honeycomb sandwich panel are more than the aluminium honeycomb sandwich panel.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.2
• /
• pp.122-129
• /
• 2004

There is an increasing need for large flat panel display devices. PDP (Plasma Display Panel) is one of the most promising candidates for this need. Thermal shock failure of PDP glass during manufacturing process is a critical issue in PDP industry since it is closely related to the product yield and the production speed. In this study, thermal shock resistance of PDP glass is measured by water quenching test and an analysis scheme is described for estimating transient temperature and stress distributions during thermal shock. Based on the experimental data and the analysis results, a simple procedure for predicting the thermal shock failure of PDP glass is proposed. The fast cooling process for heated glass plates can accelerate the speed of PDP production, but often leads to thermal shock failure of the glass plates. Therefore, a design guideline for preventing the failure is presented from a viewpoint of high speed PDP manufacturing process. This design guideline can be used for PDP process design and thermal -shock failure prevention.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.870-873
• /
• 2008

레일패드는 궤도전체의 탄성확보 뿐만 아니라 열차하중에 의해 침목으로 전달되는 충격을 완화시켜 침목과 도상의 파손을 방지하는 역할을 하는데, 통과톤수의 증가와 기후적 요인에 의하여 패드가 열화되면 패드의 강성이 증가하게 된다. 패드의 강성이 증가하게 되면 레일을 통해 침목으로 전달되는 충격하중이 증가하게 되어 침목의 파손을 유발할 수 있을 뿐만 아니라 침목하면의 도상에도 과도한 충격하중을 전달하여 도상의 손상을 가속화시킬 수 있다. 또한 레일패드의 강성변화는 궤도의 소음과 레일의 파상마모의 진전에도 영향을 미치게 된다. 따라서 레일패드의 공용기간 중에 적정한 강성을 유지할 필요가 있으며, 통과톤수의 증가에 따른 레일패드의 경화도를 산정하는 방법과 레일패드의 경화가 궤도에 미치는 영향을 정량적으로 분석하여 레일패드의 교체주기에 관한 기준을 마련할 필요가 있다. 본 연구에서는 슬래브의 질량과 일정속도대역에서의 패드강성의 민감도분석을 하여 그 결과를 비교하고 레일패드경화에 따른 대상궤도의 동적거동을 수치해석을 통하여 패드강성과 차량주행속도에 따른 윤중의 변동량과 레일의 변위, 가속도 그리고 침목의 변위, 가속도의 변화정도를 분석해 보았다. 궤도시스템의 동적해석을 위한 해석 프로그램으로는 네덜란드 델프트 공과대학에서 개발된 궤도시스템 전용 해석 프로그램인 DARTS(The dynamic analysis of a rail track structure)를 사용하였다. 대상궤도는 국내 1단계 경부고속철도에서 사용되고 있는 3중보 무도상궤도를 사용하였다.