• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.5
• /
• pp.41-47
• /
• 2009

Numerical computations were carried out to analyze the effect of a sub-cavity at several inlet Mach numbers on the control of cavity-induced pressure oscillations in two-dimensional supersonic flow. The present passive control method, the sub-cavity applied to the front wall of a square cavity, was studied for the inlet Mach numbers of 1.50, 1.83 and 2.50. The results show that the sub-cavity is effective in reducing the oscillations, and a resultant amount of the reduction depended on the inlet Mach number, the length of flat plate, and the depth of sub-cavity used as an oscillation suppressor.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.119-122
• /
• 2009

Numerical computations were carried out to analyze the effect of inlet Mach number and sub-cavity on the control of cavity-induced pressure oscillations in two-dimensional supersonic flow. A passive control method wherein a sub-cavity was introduced on the front wall of a square cavity was studied for Mach numbers 1.50, 1.83 and 2.50. The results showed that sub-cavity is effective in reducing the oscillations at different inlet Mach numbers. The resultant amount of attenuation of pressure oscillations depended on the inlet Mach number, length of the flat plate, and the depth of the sub-cavity used as an oscillation suppressor.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.108-108
• /
• 2009

The main object of this research is to minimize the shock effects which frequently result in fatal damage in wind met mast on impact of barge. The collision between wind met mast and barge is generally a complex problem and it is often not practical to perform rigorous finite element analyses to include all effects and sequences during the collision. LS-dyna generally purpose explicit finite element code, which is a product of ANSYS software, is used to model and analyze the non-linear response of the met mast due to barge collision. A significant part of the collision energy is dissipated as strain energy and except for global deformation modes, the contribution from elastic straining can normally be neglected. On applying impact force of a barge to wind met mast, the maximum acceleration, internal energy and plastic strain were calculated for each load cases using the finite element method and then compare it, varying to the velocity of barge, with one varying to the thickness of rubber fender conditions. Hence, we restrict the present research mainly to the wind met mast and also parametric study has been carried out with various velocities of barge, thickness of wind met mast, thickness and Mooney-Rivlin coefficient of rubber fender with experimental data. The equation of motion of the wind met mast is derived under the assumption that it was ignored vertical movement effect of barge on sea water. Such an analyzing method which was developed so far, make it possible to determine the proper size and material properties of rubber fender and the optimal moving conditions of barge, and finally, application method can be suggested in designing process of rubber fender considering barge impact.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.13 no.4
• /
• pp.32-41
• /
• 1994

The stabilized Michelson interferometer was developed in order to measure micro dynamic displacement at the surface of solids due to elastic wave propagation. The stabilizer was designed to compensate light path disturbances using a reference mirror driven by piezoelectric actuator. Using stabilizer, the effect of external vibration was reduced and the quadrature condition was satisifed. As the results, the output of photodetector had maximum sensitivity and linearity. The minimum detectable displacement was 0.3nm at the band width of 10 MHz. The epicentral displacements due to the glass capillary breaks and the steel ball drop impact were measured using the developed interferometer and the results were compared with the calculated one.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.2 no.1
• /
• pp.108-120
• /
• 1998

많은 주거용 및 상업용 건물에서 콘크리트 구조물이 사용되고 있는데 콘크리트 슬래브 아래의 기초부분에 공동이 생기는 경우가 종종 발견되었다. 이 현상은 진동하중, 반복되는 충격, 흙의 유실, 혹은 불량시공 등 여러가지 이유에 의해 발생할 수 있다. 이러한 현상은 구조물의 지지력을 저하시키고 결국 수명을 단축시키는 원인이 되므로 이러한 문제는 일찍 발견되고 조치가 취해질수록 구조물의 수명을 연장시킬 수 있을 것이다. 이러한 공동이 슬래브 아래에서 형성되고 커져가는 과정을 모니터할 수 있으면 현재 상태에서 지지력을 결정하고 또한 앞으로 남은 수명을 예측함으로써 적절한 유지보수계획을 세우는 데에 큰 도움이 될 것이다. 이 연구에서는 음파와 응력파, 특히 표면파가 슬래브 아래의 공동을 찾아내는데 이용되었고 두 가지 방법의 효과가 상호 비교되었다. 두개의 콘크리트 슬래브를 만들어 이용했는데 하나는 미리 공동이 만들어져 있었고 다른 하나에는 공동이 없었다. 공동이 없던 슬래브는 처음 손상안된 상태에서 실험을 한 후 나중에 하부에 공동을 만들어 다시 실험하였다. 실험결과와 실제 공동의 위치가 잘 일치되는 것으로 나타났다. 응력파를 이용하는 방법과 음파를 이용하는 방법사이의 장단점이 비교검토되었고 실험의 표준방법과 결과에 대한 일반적인 기준이 확립되어야 하는 필요성에 대해서도 설명되었다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.187-188
• /
• 2004

압전식 충격파 쇄석기를 사용하여 대상물을 파쇄하는 과정에서 발생하는 음의 특성을 조사한 결과, 대상물이 파쇄됨에 따라 방사음이 더욱 저주파대로 이동한다는 사실을 알았다. 이 사실을 입증하기 위하여 대상물의 파쇄상태를 모델링한 대상물을 사용한 실험에서는 동일한 결과를 관측할 수 있었다. 따라서, 본 논문에서는 실험적으로 추정된 연구결과를 이론적으로 확인하기 위하여 유한요소법을 이용한 수치 시뮬레이션을 실험과 유사하게 모델링한 대상물에 실행하였고, 시뮬레이션에서 관측된 결과를 제시하여 대상 연구결과의 유효성을 입증하였다.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2000.11a
• /
• pp.367-372
• /
• 2000

국내 도시 철도에 차량 견인용으로 사용되는 전동기는 인버터로 구동되는 200㎾급 3상농형 유도 전동기를 표준 사양으로 선정하였으며 열악한 운전 조건에서도 20년을 상회하는 운전 수명을 보장하도록 규정하고 있다. 그러나 PWM 인버터 구동은 견인 전동기에서 추가적인 고조파 발열 손실과 소음, 진동을 초래하며 더욱이 고속 스위칭에 의한 과도 전압과 빠른 상승 시간을 가진 반복 과전압은 인버터와 전동기를 연결하는 케이블 공진 현상에 의해 배가되어 정현파 구동 시에 예상할 수 없었던 매우 커다란 스트레스를 절연 시스템에 가하게 되어 견인 전동기의 예상 수명에 심각한 영향을 미치고 있다. 따라서 본 연구에서는 인버터 구동 견인전동기의 운전수명을 보장하기 위해서는 기존의 시험 방법에 포함되지 않은 PWM 가변속 구동에 따른 고조파 손실과 과도 전압 충격의 문제점을 고려한 새로운 장기 신뢰성 평가기법이 절실히 필요한 상황이기 때문에 이를 제안하고자 하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.965-970
• /
• 2011

We develop a diagnostic system to monitor failures in an engine-assembly line. Existing techniques such as sensory analysis, time domain analysis, frequency analysis, and statistical analysis have limitations in the diagnosis of engine-assembly failure when there are abnormal vibration waveforms (crashing and damping signals) during the assembly. We use a wavelet technique to deal with crashing and damping signals. We also implement a new technique for developing diagnostic rules from sensor data, and we demonstrate its validity.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3009-3014
• /
• 2007

The effectiveness of passive control techniques for alleviating the pressure oscillation generated in a supersonic cavity flow was investigated numerically and experimentally, respectively. The control device includes a sub-cavity installed near the leading edge of a rectangular cavity. Time-dependent supersonic cavity flow characteristics with turbulent features were examined by using the three-dimensional, mass-averaged Navier-Stokes computation based on a finite volume scheme and large eddy simulation. The results show that the pressure oscillation near the trailing edge dominates overall time-dependent cavity pressure variations. Such an oscillation can be attenuated more significantly in the presence of the sub-cavity compared with the cavity without sub-cavity, and a larger sub-cavity leads to better control performance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.191-196
• /
• 2007

With the development of micro electronic circuits and optical equipment, the demand for developing smart munitions with the ability to autonomously search for and attack targets has increased. Since the electronic components within smart munitions are affected by high temperatures, pressure, and impulsive forces upon the combustion of gunpowder, stability and reliability need to be secured for them. Securing those stability and reliability requires soft recovery system which can decelerate smart munitions. A theoretical analysis of flow is performed for the secure recovery of bullets on the basis of Navier-Stokes equation for compressible fluids. The inner pressure on a pressure tube, the speeds of bullets, and the deceleration of munitions are calculated theoretically. Theoretical results are compared with the data from the experiment with soft recovery system set up at the laboratory.