• Title/Summary/Keyword: 충격부하

Search Result 70, Processing Time 0.021 seconds

Optimal design of a portable structure under impact loading (충격부하를 받는 휴대용 구조물의 최적설계)

  • Oh, Deog-Su;Kim, Kwon-Hee
    • Proceedings of the KSME Conference
    • /
    • 2001.11a
    • /
    • pp.804-809
    • /
    • 2001
  • Optimal design of a portable structure which supports impact loading is presented. The structure requires impact loading capability, stiffness and minimum weight for portability. A collapsible tripod structure with locking mechanism is suggested. Taguchi method has been used to identify the most important design variables and the initial design. Subsequent optimization yields additional weight reduction under stress and displacement constrains.

  • PDF

Analysis of Shifting Quality for Powershift Transmission Using Transient Torque (과도 토크를 이용한 파워시프트 변속기의 변속 품질 평가)

  • 정병학;이호상;김경욱
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2003.02a
    • /
    • pp.251-256
    • /
    • 2003
  • 트랙터는 작업 시 부하의 변동이 크고, 부하 변동에 따른 적합한 단수로 운전 작업이 요구되기 때문에 잦은 변속이 요구된다. 특히 유단 변속의 경우 변속 시 큰 부하의 변동과 부적절한 변속 단수 설정할 때 변속 충격이 발생할 수 있다 이러한 변속 충격은 작업 효율을 저하시킬 뿐 아니라 운전자의 승차 감을 저하시킨다. (중략)

  • PDF

The Sidestream from WWTP; Its Characteristics and Effects on the Main Process (하수처리장(下水處理場)에서 반송수(返送水)의 성장(性狀)과 영향(影響))

  • Choi, Eui So;Lee, Ho Sik
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.13 no.1
    • /
    • pp.233-241
    • /
    • 1993
  • This study was conducted to characterise the sidestream from municipal wastewater treatment plants and its effects on the main treatment process. The flow rates and waste strengthes from each unit processes were measured and analysed, and finally determined its characteristics through the mass balance techniques. A laboratory scale completely mixed activated sludge was operated at $20^{\circ}C$ and fed in pulse with the sidestream to simulate the actual operating conditions. The study results indicated that the flow rates of sidestream ranged from 1.2 to 1.8 percent of the influent flow. However, the organic and nutrient loading rates could be increased to about 20 to 30 percent at an average, but 40 to 70 percent at a peak condition. It appears that the impurities from the sidestreams were not easily settled and resulted in lower primary efficiency. Consequently, it increased the organic loading rates to the aeration tank and the efficiencies were decreased at least about 10 percent at an average in comparison to the ordinary condition without the sidestream. With the peak condition, the efficiencies could not reach more than 80 percent for the organic removal and 50 percent for the nitrification.

  • PDF

Buffering effects of shock loads in sequencing batch reactor (SBR에서 충격부하에 따른 완충효과)

  • Ji, Dae-Hyun;Lee, Kwang-Ho;Lee, Jae-Kune
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.22 no.5
    • /
    • pp.581-587
    • /
    • 2008
  • In this study, we investigated the buffering effect with different COD, $NH_4{^+}-N$ and TP shock loads on the performance of lab-scale Sequencing Batch Reactor(SBR) using synthetic wastewater. This study was operated under the following conditions : HRT, 12 hrs : MLSS, 2,000 mg/L : F/M ratio, $0.2kgCOD/kgMLSS{\cdot}d$ : SRT, 20days, and was increased by a factor, COD : ranging from 200-2000 mg/L, $NH_4{^+}-N$ : ranging from 30-300 mg/L, T-P : ranging from 5-50 mg/L in the reactor. As results, COD removal rate at different shock loads was decreased until 42.1%(stable state : 95%) and concentration with effluent was higher than 695 mg/L(at Run 6). In case of $NH_4{^+}-N$ removal rate was decreased until 35.8% from 97.0% and also T-P removal rate was decreased until 5.0%. Effluent concentrations of COD, $NH_4{^+}-N$ and T-P were rapidly increased according to shock loads and needed 3, 4 and 6 additional cycle times for recovering the stable condition.

Development of a PVDF sensor for detecting over-load and impact on large-scale mechanical structures (대형 기계 구조물의 과부하 및 충격 측정을 위한 PVDF 센서 개발)

  • Kang, Dong-Bae;Ahn, Jung-Hwan;Kim, Gang-Yeon;Son, Seong-Min
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.15 no.11
    • /
    • pp.6399-6405
    • /
    • 2014
  • An external overload or impact is an important factor affecting the safety of large-scale structures. The proposal of this paper is the development of a system for detecting overload and impulse using a single PVDF film sensor. In large-scale structures, the load causes the structure to be deformed and the impulse generates vibration on the structure. Generally, low frequency deformation or bending of a structure is measured with a strain gauge and the high frequency vibration is detected by an accelerometer. On the other hand, a single sensor that can detect both deformation and vibration has not been developed. In this study, the development of a detection system integrated with a polyvinylidene fluoride (PVDF) film sensor, amplifier, and software was attempted to monitor deformation and impact through a single sensor. The system was verified by the possibility of detecting overload and impulse, and the two filtered signals of the PVDF were compared with a conventional strain gauge and an accelerometer.

하중운반체계의 동역학적 연구

  • 서국웅;이창민;김정태
    • Proceedings of the ESK Conference
    • /
    • 1998.04a
    • /
    • pp.117-123
    • /
    • 1998
  • 본 연구는 하중운반 보행시 지면반력에 미치는 하중운반체계의 효과에 관한 생체역 학적 연구로써 지면반력기, EMG system등을 이용하여 동역학적인 분석을 하였다. 피실험자는 2명이며, 무부하시와 하중운반시 지면반력의 동역학적인 변화, 근육의 활동전위를 분석하였다. 분석한 결과는 아래와 같다. 1. 20kgw, 30kgw의 하중운반 체계에서 비효율적인 보행동작으로 나타났으며, 30kgw의 운반체계는 지면에 큰 충격을 주는 것으로 나타났다. 2. 비복근, 전경골근, 내측광근, 외측광근의 활동전위는 부하의 증가에 따라 크게 나타았으며, 전경골근의 경우는 20kgw의 등 뒤쪽 부하시 활동전위가 감소되었다.

  • PDF

Stability Evaluation of Phased Isolation Intra-Clarifier Ditch Process on Short-Term Hydraulic Shock Loading (단기 수리학적 충격부하시 침전지 내장형 상분리 산화구공정의 처리 안정성 평가)

  • Hong, Ki-Ho;Chang, Duk
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.19 no.6
    • /
    • pp.791-799
    • /
    • 2005
  • The phased isolation intra-clarifier ditch system used in this study is a simplified novel process enhancing simultaneous removal of biological nitrogen and phosphorus in municipal wastewater in terms of elimination of additional pre-anaerobic reactor, external clarifier, recycle of sludge, and nitrified effluent recirculation by employing intrachannel clarifier. Laboratory-scale phased isolation ditch system was used to assess the treatability on municipal wastewater. When the system was operated at the HRTs of 6~12hours, SRTs of 9~31days, and cycle times of 2~8hours, the system showed removals of BOD, TN, and TP as high as 88~97%, 70~84%, and 65~90%, respectively. The rainfall in Korea is generally concentrated in summer because of site-specific characteristics. Especially, the wet season has set in on June to August. In combined sewers, seasonal variations are primarily a function of the amount of stormwater that enters the system. In order to investigate the effect of hydraulic shock loading on system performance, the laboratory-scale system was operated at an HRT of 6hours (two times of influent flowrate) during two cycles (8hours). The system performance slightly decreased by increasing of influent flowrate and decreasing of system HRT. Nitrification efficiency and TN removal were slightly decreased by increasing of influent flowrate (decreasing of system HRT), whereas, the denitrification was not affected by hydraulic shock loading. However, the higher system performance could be achieved again after four cycles. Thus, the phased isolation technology for enhanced biological nutrient removal in medium- and small-scale wastewater treatment plants suffering fluctuation of influent quality and flowrate.

Incident shock and job Stressor analysis in Private Guards (민간경비원들의 사건충격과 직무스트레스 요인 분석)

  • Kim, Chan Sun;Kim, Sang Jin
    • Convergence Security Journal
    • /
    • v.12 no.5
    • /
    • pp.51-59
    • /
    • 2012
  • Purpose of this study analyzes deeply and examine closely effect that incident shock of private guards gets in job stress. Used participation observation and In-depth analytical method to 10 common people guards inhabiting in capital region in 2012 to achieve purpose of this study. Collected interview data encoded using computer and analyzed by incident shock, job effect, job stress, organizational life. Conclusion proved in this study is as following. First, private guards appeared that incident shock such as suicide, terror threat, irrationality of superior that is produced in business spot gives great psychological fear. Second, private guards appeared suffer important shock are influenced in fear about business from shock that suffered in the past, and sociophobia appeared by thing which exert important effect changing by other business territory. Third, most private guards appeared that oneself experienced job stress from experiencing incident shock in the past. That is, incident shock exerts direct influence on customer confrontation in the past. Fourth, private guards appeared by thing which individual's organization life reduces when do not overcome incident shock that occur in the past. That is, incident shock decreases trust development and teamwork between superior and subordinate in organizational culture of private security.

Loading Rate Effects During Static Indentation and Impact on Silicon Carbide with Small Sphere (탄화규소에 구형입자의 정적압입 및 충격시 부하속도의 영향)

  • Shin, Hyung-Seop
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.20 no.12
    • /
    • pp.3847-3855
    • /
    • 1996
  • In order to study the relationship between static and cynamic behaviors of silion caride, both quasi-static indentaiton and impact experiments of spherical particle have been conducted. The difference inmaterial behavior when using the two mehtods suggests a loading rate difference in the damate pattrern and fracture strength of silicon carbide. This investigation showed some difference in damage pattern according to particla property, especially inthe case of particle impact. There was no differences in deformation behaviors according to the loading rate when the crater profiles were compared with each other at the same contact radius. From the result of residual strength evaluation, it was found that the strength degradation began at the initiation of ring crack and its behavior was colsely related to morphologies of the damage developed which was also dependent upon the extent of deformation atthe loaidng point. In the case of static indentation, there didnot exist the particle property effects onthe strength degradation behavior.