• 전기의세계
• /
• v.16 no.1
• /
• pp.65-67
• /
• 1967

최근 전력수요의 급속한 증가는 전력기기 생산업체의 실력을 Test 할 절호의 기회를 만들어 주었다. 한영공업의 변압기는 송배전용, 또는 공업용으로 널리 쓰이는 용량 500-30,000kVA, 전압 154KV이하의 내철형을 표준품으로 제작하고 있다. 이런 정도의 용량의 변압기로서는 구조가 간단한 내철형이 중량도 가볍고, 표준화가 용이하며, 충격절연내력도 표준절연내력 자체가 그리 크지 않은데다, 구조상 내부전위진동 주기도 짧으므로 충분히 이것에 견디는 강도를 갖인것을 경제적으로 제조가능하다. 한영공업의 내철형변압기는 과거 80년 이상의 경험을 가진 세계적 제작업자인 Westinghouse의 기술지도와 엄선한 외국자재로서 고도의 신뢰성을 갖는 전력용변압기를 공급하게 된것이다.

• Nuclear Engineering and Technology
• /
• v.24 no.2
• /
• pp.111-120
• /
• 1992

This paper investigates the dynamic characteristics of spacer grid impact loads and the effects of variations in the amplitude and frequency of the core plate motions on the resultant impact loads. A model of the longest row (15 fuel assemblies) across the core is analyzed using the input motions generated from safe shutdown earthquake. Input excitations consist of time history motions applied to the core support plate, fuel alignment plate and core shroud. The responses are determined for a set of four parameter runs with respect to the amplitude and frequency changes. Spacer grid impact loads and normalized input values for all cases are presented. The results show that changing the natural frequency has negligible effect but changing the amplitude of the input motions has a significant effect on the grid impact loads Therefore, time history analysis is not necessary for a shifted case to get the core responses under the seismic excitation.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.338-342
• /
• 2018

In order to solve the floor impact sound problem in the upper and lower floors, the Ministry of Land, Transport and Maritime Affairs also notifies the physical properties of the resilient material affecting the floor impact sound level. The dynamic modulus of elasticity and the loss factor before and after heating are most related to the floor impact noise, especially for the cushioning material. Therefore, in this study, the rate of change with respect to the dynamic modulus and loss factor with temperature change was examined by increasing $10^{\circ}C$ by $10^{\circ}C$ from the temperature condition of $70^{\circ}C$ specified in the standard. The dynamic modulus of elasticity and the loss modulus were measured by using the pulse excitation method for eight kinds of samples. The calculation method was calculated by the time series analysis method using the damped vibration waveform.

• Environmental and Resource Economics Review
• /
• v.14 no.2
• /
• pp.291-336
• /
• 2005

This paper investigates how oil price changes have an impact on the Korean manufacturing production activities. For this investigation, we use a structural VAR motel to estimate impulse response functions of industrial production, producer price and export price to an oil price increase over manufacturing industries. It finds that in most manufacturing industries, an oil price increase leads to decreases in industrial productions and domestic prices except energy intensive industries, but to increases in industrial export prices except non-metallic (26), computers and offic machinery (30), electronic components, radio, television and communication (32) industries. This result explains that an oil price increase makes negative impacts on the manufacturing production activities not only through demand slowdown in the domestic markets but also through supply contraction in the export markets.

• Composites Research
• /
• v.28 no.4
• /
• pp.143-147
• /
• 2015

This paper proposes laser ultrasonic technique for the impact damage inspection of hydrogen fuel tank and proves that the impact damage can be visualized using an ultrasonic wave propagation imager with an easy detachable sensor head as an impact damage inspection tool for hydrogen fuel tanks. Also the performances of the proposed ultrasonic propagation imager support it can be implemented in real-world technology when the hydrogen car becomes popular.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.7
• /
• pp.94-99
• /
• 2003

For the assessment of combustion stability of a liquid rocket engine, a device called "Pulse Gun" should be developed first, which can induce artificial perturbations that may lead to excitations of pressure oscillations in a combustion chamber. A model chamber has been used for identifying design parameters of a pulse gun that defines its characteristics. Dynamic pressure measurements showed that shock waves generated from pulse guns are axisymmetric around the axis of a pulse gun barrel. Pressure waves perturbed by a pulse gun induce resonant acoustic frequencies of a model chamber. This fact indicates that successful pressure field perturbations of the KSR-III combustion chamber can be performed by a newly developed pulse gun device. A maximum value of dynamic pressure peaks measured at the opposite point against a pulse gun outlet becomes stronger as charge mass of pulse gun powder increases.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.715-726
• /
• 2023

This study suggested that protective panels should be installed as sacrificial members as a safety design method for structures with potential explosions such as hydrogen charging stations to minimize direct damage to the structure and have resilience. To this end, the focus of the experiment is on quantitatively evaluating the impact of the structure when the protection panel is installed closely or spaced apart from the structure in a high-speed collision situation of the projectile. The experimental design used steel plates instead of concrete structural members mainly used in the past for excellent reproducibility, and the impact of structural members was compared and analyzed through deformation differences on the back of the steel plate. In addition, the impact of changes in the physical properties of the elastic body used as a separation material for the protective member and the difference in shock wave transmission time according to the protective member and the elastic body on the structural member was investigated.

• Childhood Kidney Diseases
• /
• v.14 no.1
• /
• pp.10-21
• /
• 2010

The overall prognosis of Henoch-Schoenlein purpura (HSP) is favorable, but severe nephritis has a high risk of progression to end stage renal failure. Recent studies emphasize the importance of early treatment in children with severe HSP nephritis, but the treatment of severe HSP nephritis still remains controversial due to the rarity of randomized controlled studies in this field. Nevertheless, several intensive therapies, such as intravenous high-dose methylprednisolone pulse, immunosuppressive/cytotoxic drugs, fibrinolytic therapy, anticoagulants, antiplatelet agent and plasma exchange, have been used in children with severe HSP nephritis. In this review, we focus on the treatment of severe HSP nephritis in children.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.7
• /
• pp.2196-2204
• /
• 1996

The damage mechanism by the impact of steel ball on the soda-lime glass having a different surface roughness was investigated. An initiation and a propagation behavior of cracks formed by each impact velocity were quantitatively studied. A 4-point bending test was carried out to evaluate the remaining bending strength of a scratched soda-lime glass which impacted by the steel ball. As the surface roughness was increased, the shape of cracks became more irregular rather than those of the smooth specimens. The phenomenon of turning up in the wing of cone cracks occurred even at the lower velocity than the critical velocity caused the crushing. The threshold velocity of cracks initiation generally became lower than those of smooth specimen. An initiation and a propagation behavior of radial cracks had no relation with the direction of scratch on the surface. The remaning benidng strength of the scratched specimen according to impact velocity had no big difference compared with those of the smooth specimen.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.2
• /
• pp.73-80
• /
• 2014

A camera module that gathers visual information via aerial observation reconnaissance is equipped inside a gimbal structure. This gimbal structure system must reduce dynamic responses in order to obtain clear images under all circumstances. Among many design specifications for this system, there is MIL-STD-810G as a shock standard. This specification indicates a limitation of the acceleration of the camera module under a base shock excitation on the gimbal structure. The satisfaction of this condition can usually be proved by experiment, because it includes bearings and dynamic isolators made of rubber. Numerical analysis must be proposed for design improvement of the gimbal structure. To achieve this goal, transient response analysis for the base shock excitation was performed using the finite element method. Experimental results were compared with numerical solutions and it is shown that the present method is useful.