• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.94-103
• /
• 2016

For elevated railway station on which track is connected with superstructure of station, structural vibration level and structure-borne-noise level has exceeded the reference level due to structural characteristics which transmits vibration directly. Therefore, existing elevated railway station is in need of economical and effective vibration reduction method which enable train service without interruption. In this study, structural vibration non-transmissible system which is applied to vibroisolating material for column member is developed to reduce vibration. That system is cut covering material of the column section using water-jet method and is installed with vibroisolating material on cut section. To verify vibration reduction effect and structural performance for structural vibration non-transmissible system, impact hammer test and cyclic lateral load test are performed for 1/4 scale test specimens. It is observed that natural period which means vibration response characteristics is shifted, and damping ratio is increased about 15~30% which means that system is effective to reduce structural vibration through vibration test. Also load-displacement relation and stiffness change rate of the columns are examined, and it is shown that ductility and energy dissipation capacity is increased. From test results, it is found that vibration non-transmissible system which is applied to column member enable to maintains structural function.

• Composites Research
• /
• v.12 no.1
• /
• pp.68-75
• /
• 1999

This study has observed that the dynamic behavior of Metal Matrix Composites (MMCs) in low velocity impact varies with impact velocity. MMCs with 15 fiber volume percent were fabricated by using the squeeze casting method. The AC8A was used as the matrix, and the alumina and the carbon were used as reinforcements. The tensile and vibration tests conducted yielded the yielded the tensile stress and elastic modulus of MMCs The low pass filter and instrumented impact test machine was adopted to study dynamic behaviors of MMCs corresponding to impact velocity. Stable impact signals were obtained by using the low pass filter. Impact corresponding to impact velocity. Stable impact signals were obtained by using the low pass filter. Impact energy of unreinforced alloy and MM s increased as the impact velocity increased. The increase of crack propagation energy was especially prominent, but the dynamic toughness of each material did not change much. To show the relation between crack initiation energy and dynamic fracture toughness, a simple model was proposed by using the strain energy and stress distribution at notch. The model revealed that crack initiation energy is proportional to the square of dynamic fracture toughness and inversely proportional to elastic modulus.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.181-186
• /
• 1994

본 연구에서는 수직펌프 구조물의 동적특성을 규명하기 위해 역학적인 해석과 유한요소법의 상용코드인 ANSYS를 이용하여 수치해석한 결과를 현장실험을 통한 분석 결과와 비교 검토하였다. 구조물 진동의 해석은 현재 가동중인 화력발전소의 수직 순환수 펌프(해수 순환수 펌프)를 대상으로 하였으며 고유진동수의 예측 및 실체 측정을 하였다. 수직순화수 펌프의 고유진동수 측정은 정지된 상태에서 충격가진 방법 및 전기자석식 가진기를 이용 실시되었으며 임시로 별도 설치된 펌프구조물의 지지봉에 대한 진동 영향평가도 하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.273-279
• /
• 1995

본 연구에서는 증기발생기 튜브의 마모마손에 대한 평가 방법을 열수력해석, 자유진동해석, 비선형해석, 마모량예측 등의 과정을 통해 증기발생기튜브의 마모량과 수명을 예측하는 방법에 대해 알아보았다. 본 연구를 통해 얻어진 결론은 다음과 같다. 1) 증기발생기 비선형충격해석에서 사용되는 정확한 난류 여기진동가진 가진력의 확보가 정확한 마모치를 예측할 수 있고, 2) 마모치예상을 위한 수식의 사용시 튜브의 미끌림거리 over bar L값이 매우 주요한 변수임을 알 수 있었다. 3) 충격력과 마모치의 연관관계에 대한 정확한 정의가 본 연구에 사용된 Archard의 마모방정식 이외에 여러 가지가 있으나, 아직 이들에 대한 정보부족으로 더 많은 검토가 필요하다.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.18-20
• /
• 2018

본 논문에서는 위치-속도 모드전환 제어기를 제안하고 이 제어기를 활용한 운동범위 제약을 가진 기계의 연착륙 방법을 제시한다. EGR 밸브와 같은 기계제품들은 이동할 수 있는 범위를 가지며 범위 내에서 위치를 제어한다. 위치제어 중 양끝 위치로 이동시 기계는 빠른 속도로 충돌할 수 있다. 속도가 빠르면 빠를수록 충돌 시, 충격력이 커지며, 충격력으로 기구물은 빠르게 마모되고 수명을 단축시킬 수 있다. 따라서 양끝 위치 이동 시, 일시적으로 속도를 제어할 수 있는 제어기가 필요하다. 제안된 위치-속도 모드전환제어기는 Hanus Scheme을 사용하여 모드전환 시, 범프효과로 인한 부작용을 감소시켰으며, 모드전환 이후 모드 전환된 제어기의 지령을 빠르게 추종한다. 마지막으로, EGR 밸브 양끝 위치 학습알고리즘에 적용시켜 시험하였다.

• Composites Research
• /
• v.20 no.5
• /
• pp.1-6
• /
• 2007

This study was performed to make a comparison on low-velocity impact behavior between graphite/epoxy composite laminate and steel plate. In order to validate the proposed scheme fur the impact behavior of the plate, the Karas's impact model was used. The impact models for this comparative study are the graphite/epoxy composite plate having $[0/90/45/-45/-45/45/90/0]_{8S}$ laminate sequence and the steel plate with a steel ball impactor. The low-velocity impact behaviors for two types of plates were comparatively investigated and performed by considering different impactor velocities and weights respectively. In this investigation, it was found that the composite laminate has impact energy absorption effect due to more flexible behavior than the steel plate, and also it has better characteristics on impact damage and weight.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.130.2-130
• /
• 2003

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.5 s.182
• /
• pp.128-136
• /
• 2006

To predict the noise and vibration characteristics of induction motor system, it is necessary to develop the mathematical model including all the mechanical elements such as shaft, blower, rotor, fan, bearing, case and mounting parts. Coupling effect between case-mount system and rotor- shaft system including shaft, blower, rotor, fan and bearing is examined. Impact exciting experimentation was done in order to verify vibration model of the induction motor system. From experimental results, we can appreciate that the natural frequencies of induction motor system are in good agrements with analysis.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.56-56
• /
• 2003

계류라인은 해양관측부이 혹은 해양구조물을 일정일치에 계류시키기 위해서 중요한 역할을 수행한다. 본 연구에서는 상부구조물의 거동에 의한 계류라인의 거동특성을 파악하기 위하여, 상부 윗단에서 일정주기와 진폭으르 가진되는 경우에 장력과 변위의 응답을 살펴보았다. 수평으로 가진되는 경우에 규칙적으로 가진됨에도 불구하고 맨윗단에서 장력은 가진 주파수 성분 이외에 고주파수 성분이 함께 응답하였다. 이 때 고주파수 성분은 계류라인의 길이와 장력에 따라서 다른 성분으로 나타났는데, 이 성분은 상부단에서 발생한 에너지가 전달되어 해저고정단에서 다시 반사되어 발생하는 것으로 판단되어 진다. 향후 이 성분에 대한 정량적인 연구가 필요하다. 수직으로 가진되는 경우에는 장력이 충격력 효과로 나타났는데, 이것은 지반과의 상호작용에 의한 것으로 판단된다.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.671-677
• /
• 2021

The present study aims to investigate the influence of the water to binder ratio of finishing mortar on the floor impact sound of apartments. For this, same resilient materials Expanded Polystyrene (EPS) with constant dynamic stiffness and different mortar layers with 52 %, 66 % and 72 % water to binder ratio respectively were used to build floating floor structures on which floor impact sounds were measured in standard testing facilities. As a result, it was found that light-weight floor impact sound was transmitted well when the water to binder ratio was 52% due to the high density. In case of heavy-weight floor impact sounds, since water to binder ratio of finishing mortar becomes higher as the weight of upper layer of resilient material lighter, it was shown that the natural frequency of floating floor structure moves to 63 Hz bandwidth which eventually cause a higher sound pressure level of floor impact sound. Thus, effect of water to binder ratio of mortar on the heavy-weight floor impact sounds was investigated.