• Title/Summary/Keyword: 출력주파수

Search Result 2,041, Processing Time 0.03 seconds

A time-frequency analysis of the EEG in negative and positive emotional states evokede by visual stimuli (시각 자극에 의한 긍/부정 감성상태에서 측정한 뇌파에 대한 시간-주파수 분석)

  • 류창수;김승환;박선희;이임갑;김지운;손진훈
    • Proceedings of the Korean Society for Emotion and Sensibility Conference
    • /
    • 1997.11a
    • /
    • pp.98-101
    • /
    • 1997
  • 사람 사이의 가장 간단한 의사 표현인 긍정/부정을 뇌파를 통해 분별하려는 작업의 첫걸음으로 시각자극에 의해 일어난 긍정/부정 감성 상태에 대해 전두부와 후두부에서 뇌파를 측정하였다. 시간-주파수 분석을 행하고, 특정 주파수 세부 대역에서 상대출력의 시간에 따른 변화를 살펴보았다. 긍정적 감성상태에서는 느린 a 파의 증가가, 부정적 감성상태에서는 빠른 a파일의 증가가 관찰된다. 이러한 상대출력의 시간에 따른 증감을 통해 긍정/부정 감성상태의 분별 규칙을 설정하여 측정된 뇌파에 적용을 보았다.

  • PDF

A Study on the Signal Transfer System of the Train Propulsion and Braking (전동차의 추진 및 제동 신호전달 시스템에 대한 고찰)

  • Park, Jung-Kwang;Yun, Hyun;Kim, Nam-Joon
    • Proceedings of the KIEE Conference
    • /
    • 2006.07b
    • /
    • pp.1281-1282
    • /
    • 2006
  • 전동차 운행시스템은 속도를 지령하는 NOTCH의 상태를 전압으로 인식하여 주파수로 변환한 후 주파수 변환신호를 출력하는 아날로그 및 디지털 인코더와 인코더의 주파수 변환신호를 입력받아 카운트하여 노치의 상태를 데이터버스(DATA BUS)에 실어 중앙처리장치(CPU)에 데이터를 출력하는 특징을 갖는다. 이런한 전동차 신호전달시스템 분석을 본 연구에서 하고자 한다.

  • PDF

A Study on the Signal Transfer System of the Train Propulsion and Braking (전동차의 추진 및 제동 신호전달 시스템에 대한 고찰)

  • Park, Jung-Kwang;Yun, Hyun;Kim, Nam-Joon
    • Proceedings of the KIEE Conference
    • /
    • 2006.07c
    • /
    • pp.1741-1742
    • /
    • 2006
  • 전동차 운행시스템은 속도를 지령하는 NOTCH의 상태를 전압으로 인식하여 주파수로 변환한 후 주파수 변환신호를 출력하는 아날로그 및 디지털 인코더와 인코더의 주파수 변환신호를 입력받아 카운트하여 노치의 상태를 데이터버스(DATA BUS)에 실어 중앙처리장치(CPU)에 데이터를 출력하는 특징을 갖는다. 이러한 전동차 신호전달시스템 분석을 본 연구에서 하고자 한다.

  • PDF

Analysis of Single-Stage LLC resonant converter with wide output range under light load (경부하에서 넓은 출력 범위를 가지는 Single-Stage LLC 공진 컨버터 분석)

  • Park, Sang-Beom;Lee, Woo-Cheol
    • Proceedings of the KIPE Conference
    • /
    • 2019.07a
    • /
    • pp.98-100
    • /
    • 2019
  • 현재 LLC 공진 컨버터는 넓은 주파수 범위에서 ZVS(zero voltage switching) 달성을 통하여 고효율 및 높은 전력 밀도를 얻을 수 있어 널리 사용되는 추세이다. 일반적인 LLC 공진 컨버터는 중부하에서 주파수 제어를 통해 이득을 조절할 수 있다. 하지만 경부하에서는 주파수 작동 범위에 제한으로 이득을 조절하지 못하는 문제점이 있다. 이에 본 논문은 Single-Stage LLC 공진 컨버터를 통해 경부하 조건에서 넓은 출력 범위를 가지는 것을 분석하였으며 시물레이션을 통해 확인하였다.

  • PDF

Measurement of Power and frequency in the Axially Extracted Virtual Cathode Oscillator by diode condition

  • 정민우;최명철;최성혁;안정철;조태승;김진구;조대식;임재용;김태영
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 1999.07a
    • /
    • pp.247-247
    • /
    • 1999
  • 새로운 형태의 고출력 마이크로웨이브 발진장치인 가상 음극 발진기(Virtual Cathode Oscillator)를 이용하여 음극(Cathode)의 크기를 변화시켜 가면서 출력을 측정하였다. 측정된 출력을 전산모사의 결과를 토대로 재해석하였고, 우리가 보유한 천둥 장치에서의 최고출력을 얻을 수 있는 음극 크기를 측정하여 전사모사의 결과와 비교를 하였고, 그에 따른 주파수를 계산을 하고 전산모사를 통해 확인하였다. 본 실험을 하기 위해 본 실험실이 제작한 천둥 장치의 조건(300kV, 20kA)을 사용하였고, 음극은 탄소를 사용하였고, 전자빔의 형탠는 Solid 빔을 사용하였다. 전에 발표했던 전산모사 내용을 실험을 통해 파원(~수 GW)와 에너지 변환효율(~10%), 그리고 주된 동작 주파수등을 계산했다. 본 실험실이 보유한 천등 장치에서 수 GW급의 출력을 얻기 위해 입력 전압에 따른 변화를 전산모사하였다. 이와같은 가상 음극 형성을 위한 다이오드 구조에 따른 Vircator 출력의 경향을 관찰하였다.

  • PDF

An Analysis of Maximum Allowable Transmission Output Level between Adjacent Channels in TV Frequency Band (TV 주파수 대역 내 인접채널간의 최대 허용 송신 출력 레벨 분석)

  • Cho, Ju-Phil
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.16 no.7
    • /
    • pp.1364-1369
    • /
    • 2012
  • We make an analysis of maximum allowable transmission output level to get the solution how heterogeneous systems between adjacent channels can be used in TVWS(TV White Space). The two applied systems are WLAN and WiBro and the overall performances are analyzed based on simulation results according to various density and transmission output of interfering transmitter. In order to get the relationship between interfering density of two systems and allowable maximum transmitter output, we consider the case that a WLAN is an interfering transmitter and a WiBro is a victim receiver. Each simulation results, obtained by free space channel model, are analyzed by SEAMCAT. Coexistence results may be widely applied into the technique development to get the coexisting condition for wireless devices using many communication protocols in an adjacent frequency and a same frequency.

Design of a CMOS Frequency Synthesizer for FRS Band (UHF FRS 대역 CMOS PLL 주파수 합성기 설계)

  • Lee, Jeung-Jin;Kim, Young-Sik
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.28 no.12
    • /
    • pp.941-947
    • /
    • 2017
  • This paper reports a fractional-N phase-locked-loop(PLL) frequency synthesizer that is implemented in a $0.35-{\mu}m$ standard CMOS process and generates a quadrature signal for an FRS terminal. The synthesizer consists of a voltage-controlled oscillator(VCO), a charge pump(CP), loop filter(LF), a phase frequency detector(PFD), and a frequency divider. The VCO has been designed with an LC resonant circuit to provide better phase noise and power characteristics, and the CP is designed to be able to adjust the pumping current according to the PFD output. The frequency divider has been designed by a 16-divider pre-scaler and fractional-N divider based on the third delta-sigma modulator($3^{rd}$ DSM). The LF is a third-order RC filter. The measured results show that the proposed device has a dynamic frequency range of 460~510 MHz and -3.86 dBm radio-frequency output power. The phase noise of the output signal is -94.8 dBc/Hz, and the lock-in time is $300{\mu}s$.

LDO Linear Regulator Using Efficient Buffer Frequency Compensation (효율적 버퍼 주파수 보상을 통한 LDO 선형 레귤레이터)

  • Choi, Jung-Su;Jang, Ki-Chang;Choi, Joong-Ho
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.48 no.11
    • /
    • pp.34-40
    • /
    • 2011
  • This paper presents a low-dropout (LDO) linear regulator using ultra-low output impedance buffer for frequency compensation. The proposed buffer achieves ultra low output impedance with dual shunt feedback loops, which makes it possible to improve load and line regulations as well as frequency compensation for low voltage applications. A reference control scheme for programmable output voltage of the LDO linear regulator is presented. The designed LDO linear regulator works under the input voltage of 2.5~4.5V and provides up to 300mA load current for an output voltage range of 0.6~3.3V.

Subtraction of source noise in a fiber-optic gyroscope operating at the proper frequency (적정주파수에서 동작하는 광섬유 자이로스코프의 광원잡음 소거)

  • 진영준;박태용;박희갑
    • Korean Journal of Optics and Photonics
    • /
    • v.11 no.2
    • /
    • pp.97-101
    • /
    • 2000
  • We proposed and demonstrated a new scheme for subtracting the source excess noise from the output of the fiber-optic gyroscope. Unlike the previous methods, this scheme has an advantage of not requiring a delaying fiber for source noise detection and can be simply applied to fiber gyroscope operating at the proper frequency. By usmg this scheme. the proper frequency component of the source excess noise was subtracted from the gyroscope output. As a result, we obtained the reduction of noise by 12 dB (electrical) which was measured from the noise floor spectrum in the fiber gyroscope modulated at the proper frequency. We also obtarned !be random walk coefficient of thc gyro output reduced by a factor of 3.5. f 3.5.

  • PDF

Design of A Power Oscillator Using Spiral Resonator (나선형 공진기를 이용한 고출력 발진기의 설계)

  • Koo, Ja-Kyung;Lim, Jong-Sik;Lee, Jun;Lee, Jae-Hoon;Han, Sang-Min;Ahn, Dal
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.11 no.10
    • /
    • pp.3866-3872
    • /
    • 2010
  • This paper presents a design of high power oscillator using a spiral resonator and high power transistor with measurement. Even lots of drawbacks are known in design of oscillators using high power transistors, the spiral resonator is adopted because it has relatively high Q out of planar resonators. The designed power oscillator at 1.8GHz is fabricated and tested. Measurement shows the obtained output power is 23.5dBm at 1.74GHz with -146.76dBc/Hz of phase noise at 1MHz offset. In addition, it is illustrated that the frequency stability is excellent with the shift less than 1MHz and the measured maximum output power is around 24dBm when the bias voltages are adjusted.