• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.465-468
• /
• 2005

MMA(Multi-Modulus Algorithm) is inferior at a initial equalization in high ISI(intersymbol interference), because it is the inaccurate decision. To improve this probel SMMA(Sliced Multi-Modulus Algorithm) is based on using the MCMA(Modified Constant Modulus Algorithm). SMMA is a improved capability than MMA in high SNR but is inaccurate decision in low SNR. In this paper, We propose some multi-modulus blind equalization algorithm scheme. It is a method of operation in some multi-modulus algorithm which does no obstruct a convergence property at the initial equalization in the low SNR. Proposed algorithm improves the steady-state performance. And it uses residual ISI of the equalizer output in order to decide the optimum switching time between the single modulus and the multi-modulus algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.395-400
• /
• 2017

The paper discussed the air-to-fuel ratio control of automotive fuel-injection systems using the cerebellar model articulation controller(CMAC) neural network. Because of the internal combustion engines and fuel-injection's dynamics is extremely nonlinear, it leads to the discontinuous of the fuel-injection and the traditional method of control based on table look up has the question of control accuracy low. The advantages about CMAC neural network are distributed storage information, parallel processing information, self-organizing and self-educated function. The unique structure of CMAC neural network and the processing method lets it have extensive application. In addition, by analyzing the output characteristics of oxygen sensor, calculating the rate of fuel-injection to maintain the air-to-fuel ratio. The CMAC may easily compensate for time delay. Experimental results proved that the way is more good than traditional for petrol control and the CMAC fuel-injection controller can keep ideal mixing ratio (A/F) for engine at any working conditions. The performance of power and economy is evidently improved.

• Analytical Science and Technology
• /
• v.18 no.6
• /
• pp.483-490
• /
• 2005

Mass resolution of the time of flight aerosol mass spectrometer for an aerosol component analysis depends on the initial direction and the initial energy of the ions. We have found that the shape of the optimum post focusing electric field is not linear. The maximum electric potential should be applied to the ions whose initial direction is 90 degree. To check on the post focusing effects, we have installed a laser ablation mass spectrometer. By using this LA-MS, we have found that the average energy distribution of the laser ablated ions is 8 eV. To establish the optimum mass resolution, a time delay and a high voltage are needed, and the results of the study show that 1500 nsec, and 3.7 kV are the optimum parameters for our system respectively. The isotope mass signals of copper show a good resolution.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.339-346
• /
• 2011

In the existing RF communication based WPAN environment, a lowering of battery span and interference problem among sensors occur because the value of output is set and transmitted steadily when the system on sensor is initialized. Therefore, this paper proposes a framework and a transmit method with low power which decreases the electricity consumption by properly controling transmit power of opponent by received signal strength indicator(RSSI) of each sensor. The system proposes a power-lowering method by controling transmit power properly by the transmit intensity of the connected sensor after being affected by the transmit intensity of surrounded sensor. The framework that is proposed in this paper includes data transmit module, transmit power manager module, transmit power searching module, signal transmit module, and signal receiving module.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.5
• /
• pp.1187-1195
• /
• 2013

Photovoltaic inverters should always track the maximum power of solar cell arrays in operation. Also, they should be irrespective of the maximum power point voltage of a wide range of solar cells in tracking the maximum power point. If the current ripple of solar cells occurs, the function of maximum power point tracking drops, and normal tracking is difficult when solar radiation or the maximum power point changes. To solve this problem, this paper proposed a new maximum power point tracking algorithm with high efficiency and an algorithm to reduce the current ripple of solar cells. According to the results from the test on 4KW grid-connected PV inverter, the efficiency of maximum power point tracking and inverter output and the total harmonic distortion of inverter output current showed 99.97%, 97.5% and 1.05% respectively. So, the inverter showed excellent performance, and made possible stable maximum power point tracking operation when the solar radiation rapidly changed from 100% to 10% and from 10% to 100% for 0.5 seconds.

• Journal of KIISE:Information Networking
• /
• v.37 no.5
• /
• pp.403-408
• /
• 2010

The sensor nodes can be installed in the environment in which the temperature change is considerable, such as desert, urban, and data center. Particularly, because the output power becomes less than the targeted power if a temperature is increasing, link quality is degraded and packet losses are occurred. In order to compensate the temperature changes, existing schemes detect the change of the link quality between nodes and control transmission power through a series of feedback process. However, these approaches can cause heavy overhead by additional control packets. In this paper, we propose the T2PC(Temperature-aware Transmission Power Control) to keep up the link quality despite temperature variation. At each node, T2PC compensates the attenuated link quality by controlling the transmission power based on the local temperature measurement. In addition, the packet reception ratio can be improved with less control packets than ones required in existing transmission power control methods based on the feedback control.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.457-465
• /
• 2011

The fault analysis and detecting algorithm for a 3 phase diode rectifier is proposed. The 3 phase dioderectifier is used for the AC power rectifier of the PWM inverter. The input power or diode faults cause theripples of the DC voltage, degradation of the control performance and life shortening of the DC link capacitor.In this paper, the ripple of the DC voltage is mathematically analyzed for the earth fault of input power andopen circuit fault of the diode, respectively. The fault detection and type of fault can be obtained by comparingthe average DC voltage and the instant DC voltage which is sampled with 6 times of grid frequency. Theproposed method can be easily applicable and doesn't require additional circuit. The experimental and simulationresults are presented to verify the validity of the proposed method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.418-418
• /
• 2010

최근 친환경 저전력 차세대 조명소자로 발광다이오드가 각광을 받고 있다. 하지만 종래의 수평형 발광다이오드는 사파이어 기판의 열악한 열전도도 및 전기전도도 특성으로 인하여 효율적인 열방출의 저하가 생기게 되고, 양전극과 음전극의 수평배치에 기인한 심각한 전류쏠림현상 등이 수평형 발광다이오드의 고전력 소자로서의 응용에 걸림돌로 작용하고 있다. 근래에 수평형 발광다이오드의 대안 중 하나로 수직형 발광다이오드에 대한 연구가 활발히 진행되고 있다. 수직형 발광다이오드에서는, 수평형 발광다이오드에서의 전류쏠림현상을 향상시키기 위해 얀전극과 음전극을 수직으로 배치시킨다. 그리고 열전도도 및 전기전도도 특성이 떨어지는 사파이어를 제거하기 위해 LLO(Laser Lift Off)공정이 사용된다. LLO공정으로 인해 수직형 발광다이오드의 구조는 수평형 발광다이오드와 달리 n-GaN이 위로 배치되는 특성을 가진다. 본 연구에서는, 수직형 발광다이오드의 광추출 효율을 증가시키기 위해 SiO2 나노입자를 이용한 GaN 표면요철 형성기술을 개발, 적용 하였다. SiO2 나노입자를 n-GaN상에 단일층으로 분산시키기 위해 PR(PhotoResist), 나노입자, IPA(Isopropyl Alcohol)이 혼합된 용액을 스핀코팅시켰고 그 결과를 SEM으로 확인할 수 있었다. GaN 식각을 위해 SiO2 나노입자를 마스크로 사용하였고, BCl3가스를 사용한 건식식각을 진행하였다. 그 결과 조밀하고 균일한 크기의 Cylinderical Trapezoid 식각 형상이 n-GaN표면에 형성되었음을 SEM으로 확인할 수 있었다. 우리는 표면요철이 없는 발광다이오드와 SiO2 나노입자를 이용한 표면요철이 형성된 발광다이오드의 특성을 비교하였다. 그 결과 표면요철이 있을 때 광출력이 증가함을 확인할 수 있었다. 거기에 더하여 표면요철의 높이가 300nm~1000nm로 변화함에 따른 소자의 특성변화 또한 관찰할 수 있었다.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.15 no.5
• /
• pp.53-63
• /
• 2019

To provide a hand gesture interface through deep learning in mobile environments, research on the light-weighting of networks is essential for high recognition rates while at the same time preventing degradation of execution speed. This paper proposes a method of real-time recognition of written characters in the air using a finger on mobile devices through the light-weighting of deep-learning model. Based on the SSD (Single Shot Detector), which is an object detection model that utilizes MobileNet as a feature extractor, it detects index finger and generates a result text image by following fingertip path. Then, the image is sent to the server to recognize the characters based on the learned OCR model. To verify our method, 12 users tested 1,000 words using a GALAXY S10+ and recognized their finger with an average accuracy of 88.6%, indicating that recognized text was printed within 124 ms and could be used in real-time. Results of this research can be used to send simple text messages, memos, and air signatures using a finger in mobile environments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.2
• /
• pp.79-94
• /
• 2021

A GNSS receiver installed in autonomous vehicles is the most essential device for its navigation. However, if an intentional jamming signal is generated, there is a risk of exposure to an accident risk due to deterioration of the GNSS sensor's performance. Research is required to prevent this, and accordingly, a jamming generating device must be provided. However, according to the provisions of the law related to jamming, this is illegal. In this paper, we implement an in-vehicle jamming device that complies with the provisions of the law and does not affect the surrounding GNSS sensors. Driving simulation is used to evaluate the performance of the GNSS algorithm, and the malfunction of autonomous vehicles occurring in the interference environment and data errors output from the GNSS sensor are analyzed.