• Title/Summary/Keyword: 축 분석법

Search Result 329, Processing Time 0.025 seconds

Comparison of landmark positions between Cone-Beam Computed Tomogram (CBCT) and Adjusted 2D lateral cephalogram (Cone-Beam Computed Tomogram (CBCT)과 Adjusted 2D lateral cephalogram의 계측점 차이에 관한 비교 연구)

  • Son, Soo-Jung;Chun, Youn-Sic;Kim, Minji
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.52 no.3
    • /
    • pp.222-232
    • /
    • 2014
  • Purpose: This study aims to investigate if 2D analysis method is applicable to analysis of CBCT by comparing measuring points of CBCT with those of Adjusted 2D Lateral Cephalogram (Adj-Ceph) with magnification adjusted to 100% and finding out at which landmarks the difference in position appear. Materials and methods: CBCT data and Adj-Ceph (100% magnification) data from 50 adult patients have been extracted as research objects, and the horizontal (Y axis) and vertical (Z axis) coordinates of landmarks were compared. Landmarks have been categorized into 4 groups by the position and whether they are bilaterally overlapped. Paired t-test was used to compare differences between Adj-Ceph and CBCT. Results: Significant difference was found at 11 landmarks including Group B (S, Ar, Ba, PNS), Group C (Po, Or, Hinge axis, Go) and Group D (U1RP, U6CP, L6CP) in the horizontal (Y) axis while all the landmarks in vertical (Z) axis showed significant difference (P<.05). As a result of landmark difference analysis, a meaningful difference with more than 1 mm at 13 landmarks were indentifed in the horizontal axis. In the vertical axis, significant difference over 1 mm was detected from every landmark except Sella. Conclusion: Using the conventional lateral cephalometric measurements on CBCT is insufficient. A new 3D analysis or a modified 2D analysis adjusted on 19 landmarks of the vertical axis and 13 of the horizontal axis are needed when implementing CBCT diagnosis.

Evaluation of Dry Rehydratable Film Method for Enumeration of Microorganisms in Meat, Dairy and Fishery Products (축.수산식품 중 미생물 분석을 위한 건조필름법 평가)

  • Cho, Mi-Hee;Bae, Eun-Kyung;Ha, Sang-Do;Park, Young-Seo;Mok, Chul-Kyoon;Hong, Kwan-Pyo;Kim, Sang-Phil;Park, Ji-Yong
    • Korean Journal of Food Science and Technology
    • /
    • v.37 no.2
    • /
    • pp.294-300
    • /
    • 2005
  • Contents of total aerobic bacteria, coliform, Escherichia coli, yeast, mold, and Staphylococcus aureus in meat, dairy, and fishery products were analyzed by dry rehydratable film method using 3M $Petrifilm^{TM}$ and compared against those obtained through conventional method. Two methods showed high correlations of 0.990-0.999, 0.975-0.999, 0.979-0.987, 0.978-0.984, and 0.999 for total aerobic bacteria, yeast and mold, coliform, E. coli, and S. aureus, respectively; therefore, dry rehydratable film method using 3M $Petrifilm^{TM}$ offers acceptable alternative to conventional method for enumeration of microorganisms in meat, dairy, and fishery products.

PRT Application Study Using Corridor Analysis; Focused on Nan-Gok Area (축 분석법을 활용한 PRT 적용성 연구; 난곡지역을 중심으로)

  • Lee, Jin-Sun;Kim, Kyoung-Tae
    • Journal of the Korean Society for Railway
    • /
    • v.14 no.2
    • /
    • pp.188-193
    • /
    • 2011
  • In order to solve urban transportation problems, the various alternatives are presented to the public transportation system but the master plan of construction and operation is that there is no validity. PRT unlike other public transport system, is a new transport system that can respond appropriately, to solve the traffic demand, environmental and energy problems. Meanwhile, national and international PRT system was not commercially and the actual construction and operation of the PRT in case of base research is not well established. In this paper, PRT concept was established as the new transportation system, the target area(Nan-gok area) was selected to examine the feasibility of PRT systems and the corridor analysis method has been developed to predict the PRT demand as a basic material of planning process.

Analytical Solution for Long Waves on Axis-Symmetric Topographies (축 대칭 지형 위를 전파하는 장파의 해석해)

  • Jung, Tae-Hwa;Lee, Changhoon;Cho, Yong-Sik;Lee, Jin-Woo
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.28 no.4B
    • /
    • pp.413-419
    • /
    • 2008
  • In this study, we develop analytical solutions for long waves propagating over several types of axis-symmetric topographies where the water depth varies in an arbitrary power of radial distance. The first type is a cylindrical island mounted on a shoal. The second type is a circular island. To get the solution, the methods of separation of variables, Taylor series expansion and Frobenius series are used. Developed analytical solutions are validated by comparing with previously developed analytical solutions. We also investigate various cases with different incident wave periods, radii of the shoal, and the powers of radial distance.

고분해능 XRD를 이용한 150 mm 사파이어 웨이퍼의 정밀한 면방위 측정

  • Bin, Seok-Min;Yu, Byeong-Yun;Jeon, Hyeon-Gu;Kim, Chang-Su;O, Byeong-Seong
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.08a
    • /
    • pp.306-306
    • /
    • 2012
  • 사파이어 단결정은 LED 소자의 기판으로 널리 사용되고 있으며 현재 소재 수율을 향상시키기 위하여 6인치 이상의 대구경 웨이퍼를 만들기 위하여 많은 노력을 경주하고 있다. 단결정, 특히 반도체 단결정 웨이퍼에서($00{\cdot}1$), ($11{\cdot}0$) 등의 어떠한 결정학적인 방위(crystallographic orientation)가 표면과 이루는 각도, 즉 표면방위각(off-cut 또는 misorientation angle)의 크기와 방향은 제조된 LED 소자의 물성에 영향을 끼치므로 웨이퍼를 가공할 때 정확하게 컨트롤해야한다. 본 연구에서는 고분해능 X-선을 이용하여 표면이 결정학적 방향과 이루는 면방위각을 정밀하게 결정하는 측정법을 연구하였다. 본 연구에서는 기존의 ASTM 의 측정법과는 다른 원리를 이용하고 웨이퍼의 휨(bending)이나 측정고니오 회전축의 편심과 무관하게 표면방위각을 결정하는 새로운 이론적 모델을 제시하고 그 모델을 적용하여 표면의 수직축이 대구경 사파이어($00{\cdot}1$) 축과 이루는 표면방위각을 정확하게 측정 분석하였다. 그리고 이러한 측정방법의 장점을 이용하여 ASTM의 측정법과 면방위 측정 결과를 비교 분석 하였다. 150 mm 사파이어 웨이퍼를 ASTM의 방법으로 면방위를 측정하였을 때 고분해능 장비에서 회전축 ${\Phi}$의 기준을 다르게 설정함에 따라서 수직/수평 면방위 측정결과가 많은 차이를 보였다. 그러나 본 연구에서 사용한 측정법에서는 이러한 수직/수평 면방위의 값들이 거의 변화하지 않고 일정하게 나타나는 것을 확인 하였으며, 측정한150 mm 사파이어 웨이퍼의 표면방위각은 $0.21^{\circ}$이고 표면각이 나타나는 방향은 웨이퍼의 primary edge 방향으로부터 $1.2^{\circ}$벗어나 있는 방향이었다.

  • PDF

Phase identification and degree of orientation measurements far fine-grained rock forming minerals using micro-area X-ray diffractometer -$Al_{2}SiO_{5}$ Polymorphs- (미소부 X-선 회절분석기를 이용한 미립조암광물의 상동정 및 배향도 측정 -$Al_{2}SiO_{5}$ 3상다형-)

  • 박찬수;김형식
    • The Journal of the Petrological Society of Korea
    • /
    • v.9 no.4
    • /
    • pp.205-210
    • /
    • 2000
  • Measurements of phase identification and degree of orientation for fine-grained (about 0.3 mm in diameter) minerals in rock samples performed by micro-area X-ray diffractometer.$Al_{2}SiO_{5}$ polymorphs (andalusite, kyanite and sillimanite) were chosen for the measurements and target minerals were existed on thin sections. Micro-area X-ray diffractometer is composed of 3(${\omega}\;{\chi}\;{\phi}$)-circle oscillating goniometer and position sensitive proportional counter (PSPC). $CuK_{\alpha}$ radiation was used as X-ray source and a pin hole ($50\;\mu\textrm{m}$$ in diameter) collimator was selected to focus radiation X-ray onto the target minerals. Phase identification and diffracted X-ray peak indexing were carried out by 3(${\omega}\;{\chi}\;{\phi}$)-circle oscillation measurement. Then, 2(${\omega}\;{\phi}$)-circle oscillation measurement was made for the purpose of searching the prevailing lattice plane of the minerals on thin section surface. Finally, for a selected peak by 2-circle oscillation measurement, X-ray pole figure measurement was executed for the purpose of check the degree of orientation of the single lattice direction and examine its pole distribution. As a result of 3-circle oscillation measurement, it was possible that phase identification among $Al_{2}SiO_{5}$ polymorphs. And from the results of 2-circle oscillation measurement and X-ray pole figure measurement, we recognized that poles of andalusite (122), kyanite (200) and sillimanite (310) lattice plances were well developed with direction normal to each mineral surface plane respectively. Therfore, the measurements used with micro-area X-ray diffractometer in this study will be a useful tool of phase identification and degree of orientation measurement for fine-grained rock forming minerals.

  • PDF

Synthesis of zeolite MFI films on alumina and silicon supports using seed crystals (알루미나와 실리콘 지지체에 종자결정에 의한 제올라이트 MFI 필름의 합성)

  • Ko, Tae-Seog
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.18 no.1
    • /
    • pp.38-44
    • /
    • 2008
  • Contiuous c-oriented zeolite MFI films $(<35{\mu}m)$ were prepared by hydrothermal secondary growth of silicalite-1 seed crystal in the surface of alumina porous substrate and silicon substrate. The supported films were characterized with scanning electron microscopy and X-ray diffraction. Effect of substrate surface roughness were investigated and a mechanism for c-oriented film formation and characteristic dom-like defects formation which is observed after seeding growth was discussed. The roughness of substrate plays an important role.

Study on control of orientation of multicomponent thin film by laser ablation (레이저 어블레이션에 의한 다성분 박막의 방향성 제어 연구)

  • Park, Joo-Hyung;Lee, Sang-Yeol
    • Proceedings of the KIEE Conference
    • /
    • 1997.07d
    • /
    • pp.1226-1228
    • /
    • 1997
  • 펄스 레이저 증착법을 이용하여 MgO 기판 위에 YBCO 박막을 c 축으로 성장시켰다. 이를 위하여 다양한 두께의 YBCO 박막을 여러 온도에서 증착시킴으로서 두께와 온도에 따른 YBCO 박막의 방향성을 조사하였다. 레이저원으로는 Nd:YAG 레이저의 355 nm의 파장을 이용하였으며, 증착시 기판온도는 $700^{\circ}C$$750^{\circ}C$에서 박막의 두께를 $3,000{\AA}$, $10,000{\AA}$, $20,000{\AA}$ 등으로 변화시켜 증착하였다. 이렇게 증착되어진 박막의 표면은 SEM으로 관촬되어졌으며, Raman Spectrascopy로 박막을 분석하였고, XRD를 사용하여 그 박막의 배향성을 연구하였다. 본 논문에서는 이와 같은 분석과 연구를 통하여 증착되어진 다성분 박막의 배향성이 기판온도와 박막두께에 따라 민감하게 변화함을 체계적으로 분석하였으며, 그 결과 기판온도와 박막 두께에 따른 YBCO 박막의 a 축, c 축 성장의 의존성을 확인하였다.

  • PDF

Characteristics and thermal stability of SrAl2O4: Eu2+, Dy3+ long afterglow phosphors synthesized solid state reaction and polymerized complex method (고상반응법과 착체중합법으로 합성된 SrAl2O4: Eu2+, Dy3+ 축광성 형광체의 특성 및 열적 안정성 평가)

  • Kim, Tae-Ho;Hwang, Hae-Jin;Kim, Jin-Ho;Hwang, Kwang-Taek;Han, Kyu-Sung
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.26 no.5
    • /
    • pp.193-200
    • /
    • 2016
  • Characteristics of $SrAl_2O_4:Eu^{2+}$, $Dy^{3+}$ phosphorescent phosphors synthesized by solid state reaction and polymerized complex method were comparatively analyzed. In order to evaluate thermal stability of $SrAl_2O_4:Eu^{2+}$, $Dy^{3+}$ phosphorescent phosphors at high temperature, phosphorescent properties of $SrAl_2O_4:Eu^{2+}$, $Dy^{3+}$ were investigated with thermal treatment at $1250^{\circ}C$ under reducing atmosphere, which was the general heat treatment conditions for ceramic manufacturing process. The phosphorescent properties of thermally treated $SrAl_2O_4:Eu^{2+}$, $Dy^{3+}$ phosphors synthesized by solid state reaction and polymerized complex method were investigated. The crystal structure and crystallite size were observed through XRD analysis. Microstructure and particle size of thermally treated $SrAl_2O_4:Eu^{2+}$, $Dy^{3+}$ phosphors were analyzed by SEM and PSA. Photoluminescence and afterglow characteristics of thermally treated $SrAl_2O_4:Eu^{2+}$, $Dy^{3+}$ phosphorescent phosphors were measured by spectrofluorometer.

Evaluation of Textile Images by Multidimensional Scaling Method (다차원 척도법을 이용한 의류소재 이미지의 평가)

  • 이정순;신혜원
    • Proceedings of the Korean Society for Emotion and Sensibility Conference
    • /
    • 2002.05a
    • /
    • pp.295-299
    • /
    • 2002
  • 본 연구에서는 피륙의 물리화학적 특성에 의해 결정되는 촉감, 태 이외에도 색채, 무의 등 여러 요소들의 영향을 받아 복합적으로 표현되는 의류소재의 총체적인 개념인 의류소재 이미지는 어떤 것들이 있으며 이러한 이미지들은 어떻게 분류될 수 있는지를 알아보기 위하여 의류소재 이미지의 평가를 위한 축을 개발해 보았다. 1995년부터 2000년까지의 Texjournal과 인터패션플래닝에서 발간되는 98/99FW부터 0255까지 트렌드 북에서 소재를 설명하는 형용사를 조사하여 유사한 형용사를 통합 처리하여 87개의 형용사를 최종 추출하여 형용사쌍을 만들고 소재 자극 없이 형용사쌍이 주는 소재이미지만을 가지고 쌍비교법을 통해 유사성을 7점 척도로 표시하도록 하였다. 얻어진 결과를 다차원척도법을 이용하여 분석하여 87개의 형용사의 평가차원을 살펴보았다. 의류소재 이미지를 평가하는 축을 다차원 척도법을 이용하여 개발한 결과 '남성적-여성적', '새로운-낡은 듯한', '캐주얼-클래식', '모호한-정돈된'의 4가지 차원의 8개축이 개발되었다.

  • PDF