• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.33 no.3
• /
• pp.7-10
• /
• 2004

삼중효용 흡수식 냉동기의 기본 원리, 사이를 구성 방법 및 특성, 제품 개발을 위한 핵심 기술에 대하여 알아본다. 현재 널리 사용되는 흡수식 냉동기는 대부분이 이중효용(double effect) 기기이며 그 동안의 많은 기술 축척과 연구개발의 결과, 성능이 향상되어 최근 일본에서 출시되는 신제품은 냉방 COP가 약 1.3을 넘어서고 있다. 그러나 이중효용 흡수식 냉동기로서는 도달 가능한 COP에 한계가 있기 때문에 2-3년 전부터 삼중효용 흡수식 냉동기에 대한 연구가 일본 등에서 활발히 진행되고 있다.(중략)

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.109-112
• /
• 2007

본 논문에서는 대축척 수치지도와 Quickbird 위성영상의 자동 보정을 영상공간에서 수행한다. 알고리즘은 보정변환식의 초기 계수값 결정과 정확한 변환계수 결정과정으로 나뉜다. 초기 계수값 결정은 보정변환식의 상수항을 결정하는 것으로 수치지형도의 지면개체와 영상에서 추출된 에지의 논리곱 연산을 적용하여 최적값을 추정하는 방식을 용한다. 보정 다항식의 정확한 변환계수를 결정하기 위하여 수치지형도의 지면 선형개체 점데이터와 영상의 에지개체 점데이터간 ICP 조정을 수행하였다. 제안된 방법의 정확도를 평가한 결과， 영상공간에서 1.72화소의 RMSE를 나타내었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.833-834
• /
• 2013

진료데이터는 진료를 보면서 축척된 데이터로서 다양한 병명들에 대한 의사들의 진료행위를 추적해 볼 수 있는 유용한 정보가 될 수 있으며, 진료에 재활용함으로써 환자들에 대한 진료행위를 표준화하는데 사용될 수 있다. 본 연구에서는 다양한 상황에서 환자를 진료한 근거자료인 진료데이터를 이용하여 병원에서 활용 가능한 임상진료데이터를 추출하기 위한 방법에 대한 연구를 진행하였다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.419-426
• /
• 2008

본 논문에서는, 건설도면의 건물 경계선을 이용하여 기존 지형도의 건물 레이어를 자동 갱신하는 과정에서 건물 객체간 유사를 측정하는 과정에서 Hausdorff 거리 측정 방법을 적용해 보았다. 서로 다른 축척에 의하여 발생하는 형상의 세일도 차이에서 발생하는 오차를 최소화하기 위하여 partial Hausdorff 거리를 적용하였다. 이 때 partial fraction을 정의하기 위한 기준으로 폴리곤 절점, 경계선 길이, 폴리곤 면적을 이용한 세 가지 방법을 적용하였다. 이 기준을 실제 데이터에 적용한 결과, 경계선 기준과 폴리곤 면적 기준 방법이 절점 기준에 비하여 안정적이라는 것과, 적용 기준에 따라 적절한 partial fraction 값을 사용하면 잡음에 의한 영향을 최소화할 수 있다는 것을 확인할 수 있었다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.1
• /
• pp.40-48
• /
• 2011

The purpose of this study is to contribute enhancing the accuracy of viewshed analysis through the explanation for an analysis method of viewshed analysis using GIS. According to previous studies, the visible area using digital terrain in viewshed analysis depends on a visible interest area, scale of terrain, spatial resolution and surface data. In this study, we used trend analysis and RMSE analysis in order to find the effect of a visible interest area, scale of terrain, etc in viewshed analysis. Results of this study are as follows. First, the result of viewshed analysis depends on a visible interest area, scale of terrain, spatial resolution, surface data such as previous studies. Second, the results in forest area are reliable than those of flat area in terms of a visible interest area. Third, the results based on raster grid data are stable than those of TIN(triangulated irregular network) in terms of input surface data. Fourth, according to the result of trend and RMSE analysis, the spatial resolution for analysis is differently applied to different scales digital terrain map in viewshed analysis. In detail, it is desirable that the spatial resolution is set less than 10m(in the case of 1/1,000 digital terrain map), 20m(in the case of 1/5,000 map), 30m(1/25,000 map).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.621-629
• /
• 2011

According to the development of technologies for generating the 3D spatial information, the needs for producing and updating the precise 3D objects with LoD 4 level are increased. On the other hand, the needs for real-time updating of 2D digital maps are expanded, based on the execution of various GIS projects. These 2D informations can be extracted from precisely constructed 3D spatial information, to do this the feasibility studies on extraction of the 2D information from the 3D spatial information is needed. In this study, 3D objects are modeled using multi-oblique images, and the objects are stereo-plotted using digital airborne images, as well. Then the two data sets are compared and analyzed. The results show that the accuracy assessments fulfill the 1/1,000 digital map accuracy standard of regulations for photogrametric surveying of National Geographic Information Institute, but the shapes and the areas of building objects are different between two data sets because of the portrayal standards. Consequently, researchers can conclude that it is possible to generate the building layer of large scale topographic map using multi-oblique images, but additional researches is needed to resolve the problems on differences of the portrayal standards.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.2
• /
• pp.11-23
• /
• 2000

The subjects of this study are to examine and to apply the methods of making 1 : 10,000 scale digital maps using Russian's 2 m resolution satellite images of Alternative and 8 m resolution stereo satellite images of MK-4 for the Kyoha area of Paju-city where aerial-photo surveying is not possible. A digital elevation model (DEM) was calculated from MK-4 images. With this DEM, the Alternative images were orthorectified. Ground control points (GCP) were acquired from GPS surveyings and were used to perform geometric corrections on Alternative images. From field investigation, thematic attributes are digitized on the monitor. RMS errors of the planar and vertical positions are estimated to ${\pm}0.4$ m and ${\pm}15$ m, respectively. The planar accuracy is better than an accuracy required by NGIS (national GIS) programs. Local information from field investigation was added and the resulting maps should be good as base maps for, such as, regional and urban plannings.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.121-134
• /
• 2013

The transverse cylindrical projection has been used in Korea since 1910s when the nationwide geodetic network was firstly established. However, the projection has a number of different types of functions according to a way of its mathematical derivation as well as a section of its coefficients and terms, for instance Gauss- Schreiber(GS) and Gauss-Kruger(GK) types. Although the transverse cylindrical projection itself is assigned to a system, projected coordinates would be diverse with respect to the function used in the actual calculation. In order to investigate impact of functions used in the computation, five different equations (i.e., 2 GS and 3 GK) were implemented in this study by using MATLAB. A series of numerical simulation tests has been carried out to compare and characterize them in terms of projection accuracy, difference of projected coordinates and distortion. Furthermore, a comparison between GS and GK function was made under the Korean gridding system, consisting of four zones. Results from the numerical computations were qualitatively analyzed and summarized in this paper.

• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.1 s.11
• /
• pp.117-128
• /
• 1998

National digital maps (NDM) produced by diverse production methods through various stages are ready to distribute to public. The position accuracy problems in NDM should be inspected and evaluated to guarantee the quality of NDM. The purpose of this study is 1) to find out factors of impeding accuracy by examining the position accuracy of NDM on scales of 1:1,000 and 1:5,000, 2) to form the technical basis of making accurate digital maps and 3) to increase reliability and practical use of NDM. In this study, we found out 1) obstacles of making accurate mM especially in solving horizontal and vertical location accuracy problems and 2) error sources in production methods as well as stages. These results can be contributed to increase accuracy on modifying and upgrading NDM.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.163-170
• /
• 1991

The 3 dimensional point positioning from SPOT imagery is performed by bundle adjustment methods of analytical and digital photogrammetry, and need the precise determination of image coordinates and accurate coordinates of ground control points. In this study, the authors analysed the digitized planimetric accuarcy and height accuracy of topographic maps in comparison with accurate coordinates by coordinates resulted by bundle adjustment in each cases between different acquisition method of ground control point coordinates and formats of SPOT imagery.