• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.1028-1033
• /
• 2001

열차주행시 열차의 이동축중에 의한 제도구조물의 동적거동은 열차의 동특성과 열차속도, 궤도의 유형 및 제도재료의 물성치에 따라 변하며 차량과 궤도의 상호작용에 따라 변하게 된다.(중략)

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.1
• /
• pp.21-28
• /
• 2004

We have demonstrated a low speed weigh-in motion system using FBG sensors and performed field test at a trial road. Technique, called identical chirped grating interrogation, have used for a demodulation relying on the mismatching of two identical broadband chirped gratings. We compensated the fluctuation of LED power and the temperature of sensor and used a lock-in amplifier to reduce effect of noise. We could design a bending plate that the measurement results are independent of position of weight. The FBG sensors weigh-in motion system showed linearity and reproducibility.

• Journal of the Korean Society for Railway
• /
• v.6 no.4
• /
• pp.30-36
• /
• 2003

궤도(track)는 열차가 안전하고 승차감(乘車感)이 좋게 운행되도록 충분한 강도를 가지고 더욱이 양호한 상태로 정비되어 있어야 한다. 일반적으로, 토목구조물(structure)은 하중을 받으면 변위(變位)ㆍ변형하고, 하중이 없게 되면 원래대로 되돌아간다. 즉, 각 부재는 탄성 한계 내로 응력(應力)이 들어가도록 설계된다. 그러나, 궤도는 열차의 하중과 진동을 궤도 자신의 변위 축적으로 흡수하고 있다. 결국, 처음부터 틀림이 진행되어 가는 것을 전제로 한 유일한 구조물이다. 일반적으로는 스프링 하 중량과 축중(軸重)이 큰 차량이 빠르고 대량으로 주행하게 되면 궤도 틀림이 발생하여 진행한다. 궤도 틀림 파형의 성장은 궤도 틀림이라고 하는 공간적인 파형의 시간적인 추이라고 하는 2차원적인 취급이 필요하다. (중략)

• 전기의세계
• /
• v.38 no.6
• /
• pp.12-18
• /
• 1989

한국형 고속전철을 고려하는데 있어서 위에서의 기술적인 측면보다도 오히려 수송용량, 경제성, 운영방식의 측면에서 더 많은 비중을 두고 검토해야 하는지도 모른다. 그러한 측면에서 한국형 고속전철은 한국의 지형조건, 경부간의 연변인구, 현경부선의 장래, 고속전철의 운영방식, 한국철도의 기술수준 등을 고려하지 않으면 안되고 한국형이어야 한다. 한국형 고속전철은 1. 경부간 고속전철의 거리는 380Km정도이므로 2000년대의 국민 일인당 시간가치를 기준으로 최고속도를 결정하여야 하고 표정속도는 190Km/h이상이어야 한다. 2. 고속화를 위한 필수조건인 차량의 축중을 17톤 이하로 제한하여야 하고 기존의 철도차량이 고속전철선에 야간열차등으로 투입되더라도 이 원칙은 유지되어야 한다. 3. 수송능력을 확보하기 위하여 열차편성당 좌석수는 800석 이하로 확보되어야 한다. 4. 기존선에서의 연장운행이 불가피하므로 기존선의 차량한계 내에서 안전하게 운행될 수 있어야 하고 전력공급은 기존선 방식인 A/C25KV, 60HZ의 사용이 불가피하다. 5. 고속전철의 건설비용, 차량의 제작비, 기술이전도, 국산화율 등을 고려한 시스템이어야 한다. 한국형 고속전철은 위의 기본원칙을 최소한 만조시킬 수 있는 시스템이어야 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.531-534
• /
• 2007

원격모니터링 통합모델은 고속도로나 유료도로의 영업소 요금수납 체계의 하부시스템 (요금수납시스템, ETCS시스템, 위반차량촬영시스템, 축중시스템)의 구성 및 장애 현황을 감시하고, 장애 발생에 대한 장애처리 체계를 수행하는 모델이다. 본 논문에서는 실시간 장애감시, 효율적 WorkFlow 구성 및 차별화된 정보를 제공하기 위해서 감시 S/W 엔진과 DBMS(Database Managemnet System) 기반의 C/S (Client /Server)시스템을 구성하고 WEB기반의 환경을 설계한다. 본 통합모델을 구현함으로써 체계적인 구성관리/장애관리를 통한 효율적인 유지관리 업무가 가능하며, 현장 장비의 상태 파악이 조기에 용이하여 장애 시간을 최소화 할 수 있다. 또한 Data의 지식 DB화를 통하여 유사 장애에 대한 조치가 용이하다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.451-460
• /
• 2003

In this paper, high speed fiber optic sensor weigh-in motion (WIM) system is proposed. Bragg gratings which have several advantages such as good reproducibility and good multiplicity compare to other optical fiber sensors are used for the system. Fabry-Perot filter for the signal process, which cannot be used in the high speed measurement because of the limitation in fast operation of PZT, is excluded. A new signal processing system which employs bandwidth filter is proposed and bridge type new sensor package design is also proposed. Design of the mold supporter is modified to round shape and then supporting points do not change. The data from the fiber sensors show identical and linear behavior to the axle weight. The proposed fiber optic WIM system is tested in the laboratory and experimented with actual trucks. The new concept of calibration is introduced and calculated by the experiments. The calibrated weight data show good approximations to real axial weights regardless the velocities of the truck.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.7
• /
• pp.620-628
• /
• 2010

Using the responses of deck plate, a new bridge weigh-in-motion system has been introduced. The approach includes not only a systematic algorithm for the extraction of moment influence sequence but also a sensitivity-based system identification technique. The algorithm indentifies the influence sequence, the axle loads, and axle location of moving vehicles on a bridge, simultaneously. The accuracy and practicability of the algorithm have been examined experimentally for a folded deck plate on Yongjong Grand suspension bridge. It turns out that the two-dimensional effects of the behavior of deck plate should be considered for further accuracy improvement.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.2
• /
• pp.110-121
• /
• 2016

In the decision-making, such as selection of structure, construction method, or time and scheme of maintenance, the evaluation of life-cycle cost(LCC) is of great importance. The maintenance cost occupy a large portion of the LCC of the railway track as well as the initial construction cost. Futhermore, the proportion of the maintenance cost is much higher in the ballasted track. Thus, the importance of the LCC evaluation is higher than in any other engineering structures. In this study, a LCC model that can consider various design parameters such as the type of track structure, annual traffic volume, axle load, train speed, and proportion of curve sections and engineering structures has been developed. Fundamental data for calculating costs also have been presented. Based on the model and data proposed, the trends in the variation of LCC according to the design parameters were examined and the most important design parameters in the LCC analysis of railway track were investigated. The results show that the proportion of renewal and operational costs is much higher in the ballasted track than in the concrete track, and the annual traffic volume and ballast taming period are most significant factors on the LCC of the ballasted track. On the contrary, it is revealed that the proportion of the initial construction costs in the concrete track is much higher, and the LCC of the concrete track is less sensitive to the traffic volume, train speed, and axle load.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4
• /
• pp.107-116
• /
• 1992

The structural integrity of bridges is mainly damaged by overloaded heavy vehicles. The increasing volumes of overloaded heavy vehicles has been indicated as serious state. As results several countries have revised their bridge load codes. However, because of variety of truck types and their weights it is difficult to develop rational standard truck loads. In addition the common practice that only one design configuration of standard truck is adopted to design variety of bridges causes further difficulties. The objective of the study is to investigate the statistical characteristics of vehicle loadings based on survey data collected, in which some major factors, such as vehicle configurations, vehicle weights, traffic modes, etc., are incorporated. The vehicle load effects due to single presence of heavy truck are also tested with several short-span bridges and probabilistic characteristics of current design practices are evaluated.

• Journal of the Korean Society for Railway
• /
• v.12 no.3
• /
• pp.396-404
• /
• 2009

With developing the next generation high speed railway, there need to be plans to make sure of running safety though researchs on the crack and break of rail by rolling contact fatigue. Therefore, this study performed the parametric analysis effecting on the fatigue life of rail using simplified equations. It analyzed the internal stress of rail according to the track quality, train velocity, wheel radius, track stiffness, sleeper space, wheel load. For the more, via the finite element method, it analyzed shear force on the rail head which could be changed by the early length of crack, angle of crack and temperature. As a result, this study continued the main parameter effecting on the fatigue life of rail.