• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.918-921
• /
• 2008

There are various accident at the Construction site like fall, electric shock, roll over, clash, fire, body cutting. By the way, falls are the most causes accidents. So, the best way of decreasing Construction accidents is decreasing falls. Already, there are many studies about falls accidents, but those studies were pointed out unrealistic because falls accidents are increasing. For that reason, this study look for more concrete device. In this study, grasp the cause of falls accident from 2007 to 2008. 06. 30. And then, stand on this factor I set my face to look for the causes of falls accident. This access means will drive to remove core causes, and then that means will decrease the falls accidents. Moreover that means will contribute decreasing the hole construction accidents.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.710-713
• /
• 2007

This paper presents the findings obtained from several series of analysis on the fatal accident, which are maintained by Korean Production Household Mascot Safety Industrial Complex, relative to fall. The fall accidents occurred in 5 years, from 2002 to 2006, were analyzed. The statistic relative to the fatal accidents analyzed according to different classifications such as accident rate, project amount, project type, cause, type of occupation. years of experience, and time in a day. This research would contribute to ensure the effectiveness of safety policy so as to enhance worker safety. In addition, cluster analysis was applied to find the major contributors on the fall accidents. Cross referencing between occupation and type of work, and occupation and cause were established so that the occurrence statistics of fall accidents were investigated.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.231-232
• /
• 2017

건설업은 전체 산업중 두 번째로 높은 재해율을 보이는 산업이다. 그중 거푸집 작업의 재해율은 건설업 재해율의 24%를 차지하고 있다. 거푸집 공사에서 발생하는 재해비율은 추락(30.4%), 물체에 맞음(20.8%), 넘어짐(19.1%), 부딪힘(13.1%), 끼임(8.3%)이다. 이중 가장 높은 비율을 차지하고 있는 추락에 대해서 재해요인 분석을 통하여 체크리스트를 개발 하였다. 본 연구에서 개발한 체크리스트를 중소규모 건설현장의 거푸집 공사에 적용한 결과 안전관리의 취약점을 파악할 수 있었다. 본 연구의 결과가 중소규모 건설현장에 적용하여 보다 효율적인 안전관리에 기여할 수 있기를 기대한다.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.2
• /
• pp.185-192
• /
• 2019

Construction has been well known as the industry in which accidents occur more often than other industries. The efforts to eliminate the accidents at construction sites need to be continuously conducted because they tend to cause the social problems such as massive loss of life and property. According to the Korea Occupational Safety and Health Agency (KOSHA), 26,570 (29.3 percent) out of 90,656 workers in total industrial accidents have been occurred in the construction industry in 2016. Particularly, the falling victims are the largest number, which is about 8,699. This number is increasing due to the increase of the large scale, high-rise, and complex construction structures and the various construction methods. In reality, there is a lack of analysis on the risk factors of safety accidents and preventive measures. Therefore, in this study, we have selected risk factors by analyzing the accident cases at construction sites. Based on the results, we conducted a safety practitioner-focused survey and had an interview with safety managers. In analyzing the cases, we have categorized them into three groups such as upper, middle, and lower and compared their statistical results. This study are expected to provide safety management guidelines with workers and safety managers to prevent previously fall accidents at construction site.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.6
• /
• pp.66-73
• /
• 2019

Thanks to various efforts to reduce disasters by the government and the Health and Safety Authority, disasters across industries and the construction industry show their reduction trend. However, the falling disasters in the construction industry have not decreased and increased on the contrary. Especially falling disaster caused by Hanging Scaffolding is the most critical disaster which shows low occurrence frequency but is directly connected to death of worker. The working environment for Hanging Scaffolding is poor in domestic construction site. In particular, the Hanging Scaffolding workers in small construction sites are not on the safety control and management by anyone for their works. They are driven to unsafe working condition with mostly uncertified facilities which are made by themselves. Therefore, this study is focused on searching falling disaster factors from the 242 disaster cases caused by Hanging Scaffolding Work in 15 years presented by KOSHA, and trying to provide suggestions for improvement. The improvement of the method of work requires facility improvement and work due to high accident rate caused by unsafe behavior. Analysis of the case of a disaster occurring over the past 15 years shows that no disaster occurred due to problems in the order of operations presented by KOSHA. However, it was found that many accidents resulted from death caused by safety belts not being installed or attached to ropes using safety belts without following the order of work. The most important aspect of improving the work method was the installation and wearing of lifeboats and safety belts.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.6
• /
• pp.81-88
• /
• 2019

Recently, the government has shown a decrease in disaster accidents throughout the industry and construction industry due to various efforts to reduce disasters. However, the fall accidents in the construction industry are not decreasing but increasing. In particular, the fall accident caused by scaffolding is low each year, but the disaster intensity is very high in that it directly leads to the death of workers. Scaffolding working environment in domestic construction industry is very poor. Moreover, scaffold workers in small construction sites are not subject to safety oversight and control. Therefore, this study is the installation and non-installation of the vertical lifeline, which is the most fundamental problem to be prevented during the study, to prevent the fall of the moon scaffold. In addition, it is hoped that it will be a solution for preventing accidents in construction site construction through the identification of various causes of disasters such as rope loosening, rope breaking, and fixed point failure.

• 월간 기계설비
• /
• s.255
• /
• pp.67-69
• /
• 2011

설비공사는 구조물의 진행에 따라 처음부터 준공시까지 진행되며, 작업공정별로 대부분 단시간에 이동작업을 하여야 하는 작업이 주종을 이루고 있고, 다양한 전기기계 기구를 사용하여 작업을 하기 때문에 이에 따른 추락, 협착 및 감전재해 등 안전관리에 각별히 유의해야 한다. 본지는 회원사의 시공업무에 도움이 되고자 기계설비공사의 주요 안전 관리에 대한대책을 연재한다.

• 월간 기계설비
• /
• s.256
• /
• pp.72-74
• /
• 2011

설비공사는 구조물의 진행에 따라 처음부터 준공시까지 진행되며, 작업공종별로 대부분 단시간에 이동작업을 하여야 하는 작업이 주종을 이루고 있고, 다양한 전기기계 기구를 사용하여 작업을 하기 때문에 이에 따른 추락, 협착 및 감전재해 등 안전관리에 각별히 유의해야 한다. 본지는 회원사의 시공업무에 도움이 되고자 기계설비공사의 주요 안전관리에 대한 대책을 연재한다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.399-404
• /
• 2000

건설업은 제조업에 비해 재해로 인한 사망률이 높은 산업이다. 대부분의 건설공사는 제조업과는 달리 고정된 생산현장이 아닌 단품수주에 의한 1회성 현장생산에 의존하고 있으므로 안전관리가 체계적으로 이루어지지 못하고 상황에 따른 임기응변적인 경우가 많다 또한 안전시설물의 설치도 매회 공사시마다 새로이 설치해야하므로 시간적ㆍ경제적 이유로 인해 소홀히 취급되기 쉽다. 건설재해에 대한 책임은 일차적으로 건설업자에게 부가되지만 건설공사 작업자의 안전에 설계자도 중요한 영향을 미친다./sup (4)/ 따라서 설계시에는 건설공사의 안전을 고려하여야하며, 공사계획시에는 공사안전관리의 대상을 명확히 해야 한다.(중략)

• 월간 기계설비
• /
• s.253
• /
• pp.57-61
• /
• 2011

설비공사는 구조물의 진행에 따라 처음부터 준공시까지 진행되며, 작업공종별로 대부분 단시간에 이동작업을 하여야 하는 작업이 주종을 이루고 있고, 다양한 전기기계 기구를 사용하여 작업을 하기 때문에 이에 따른 추락, 협착 및 감전재해 등 안전관리에 각별히 유의해야 한다. 본지는 시공업무에 도움이 되고자 기계설비의 주요 안전관리에 대한 대책을 연재한다.