• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.481-484
• /
• 2008

Recently, the recycling and reusing of construction and demolition waste concrete is urgently required because waste concrete is greatly increased according to the rapid increasing of urban redevelopment project, but the problem solution for demand and supply unbalance of fine aggregate is urgently required because of the restriction of collecting sea fine aggregate. So the utilization of high quality recycled fine aggregate using construction and demolition waste concrete as new fine aggregate for construction industry is urgently. Accordingly, In this study, As recycled fine aggregate manufacturing technology with exceeding in economical efficiency, reduction efficiency of environmental load and quality improvement effect of recycled fine aggregate, it is to develop dry manufacturing system composed specific gravity separator of high-speed rotation impact type and centrifugal Force Powder Collector, etc. And it is to examine mechanism of recycled sand dry manufacturing system.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.231-238
• /
• 2014

In the buildings, the systems of structures are influenced by the gravity load changes due to room alteration or construction stage. This paper proposes a system identification method establishing mass as well as stiffness to parameters in model updating process considering mass change in the buildings. In this proposed method, modified genetic algorithm, which is optimization technique, is applied to search those parameters while minimizing the difference of dynamic characteristics between measurement and FE model. To search more global solution, the proposed modified genetic algorithm searches in the wider search space. It is verified that the proposed method identifies the system of structure appropriately through the analytical study on a steel beam structure in the building. The comparison for performance of modified genetic algorithm and existing simple genetic algorithm is carried out. Furthermore, the existing model updating method neglecting mass change is performed to compare with the proposed method.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.146.2-146.2
• /
• 2012

2008년부터 2012년에 걸친 관측기간 동안 총 21일간 관측하여 AA UMa의 BVRI 광도 곡선을 획득하였다. AA UMa의 I 필터 광도 곡선은 이번에 처음으로 얻어진 것이다. 또한 극심시각을 추가적으로 획득하기 위하여 2005 ~ 2008년까지 총 8일간 AA UMa의 극심 부근의 측광관측을 수행하였고, SuperWASP에서 공개하는 AA UMa의 측광 자료를 수집하여 총 31개의 새로운 극심시각을 결정하였다. 우리의 새로운 극심시각을 포함하여 83년 동안의 AA UMa 극심시각을 수집하여 총 250개의 극심시각으로 주기 변화연구를 수행하였다. 그 결과 AA UMa 계는 $3.30{\times}10^{-11}d/yr$의 영년 주기 증가 위에 58.7년의 주기적인 변화가 겹쳐 발생한다. 주기적인 변화의 원인이 제3천체에 의해 발생한다고 가정했을 때 제3천체의 최소 질량은 $0.28M_{\odot}$이다. 이전 연구자의 광도곡선(Meinunger(1976), Wang et al.(1988), Lee et al(2011))을 수집하여 우리의 광도곡선(2008, 2012)과 함께 각각 주기변화가 보정된 통일된 기산점을 사용하여 광도곡선을 분석하였다. 모든 광도곡선에서 0.75 위상에서 밝기가 더 어두워지는 O'Connell effect가 발생하였고, 일부 광도곡선은 부식에서 식의 깊이가 주식보다 깊어지는 시기를 가진다. 이는 스펙트럼 유형이 F0-F5보다 만기형 별에서 흑점이 부식의 깊이에 영향을 주어 주식보다 깊어지는 AC Boo, TY UMa 등에서 보여 지는 특징이다. 우리는 WD 프로그램을 이용하여 광도곡선 중 B-V 색지수 그래프에서 식 이외부분에서 변화가 적고 광도곡선의 O'Connell effect의 크기가 작은 2008 광도곡선으로 광도해를 결정하였다. 전형적인 TY UMa형 별과 같이, 우리의 광도해 역시 W-subtype의 결과를 나타낸다. 결정된 광도해를 다른 광도곡선에도 적용시켜 광도곡선에 나타나는 흑점의 영향을 살펴보았다. 마지막으로 주기 분석 결과와는 달리 제 3천체의 광도는 검출 되지 않았다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.153-153
• /
• 2000

Si 산화는 반도체 공정상 필요한 과정으로 산업적으로나 학문적으로 중요하고 많이 연구되었다. 이중에서 Si(1110-7x7표면에서 초기 흡착된 산소는 준안정적 상태로 존재하며 표면온도, 산소의 노출량 그리고 진공도에 따라 그 수명이 제한된다. 이러한 준안정적 상태의 산소의 화학적 성질은 여러 표면분석장비가 동원되어 연구되었으나 아직까지 논쟁이 되고 있다. 이 경우 산소가 어떤 상태로 존재하는가는 표면화학종을 검출함으로서 해결될 수 있다. 저에너지 Cs+ 이온 반응성 산란은 이러한 요구를 충족시킬수 있는 가장 적합한 실험 방법중의 하나이다. 저에너지 Cs+ 이온 산란의 특징 중의 하나는 입사된 Cs+ 이온이 표면에 흡착된 화학종과 충돌후 탈착되면서 반응을 하여 송이 이온을 형성한다는 것이다. 이 송이 이온을 관측함으로서 표면에 존재하는 화학종을 알아 낼 수 있다. 이에 산소가 흡착된 Si(111)-7x7 표면에서의 산소의 준안정적 상태가 저에너지 Cs+ 이온 산란 실험을 통하여 연구되었다. 실험은 0.2-2L(1Langmuir = 10-6 Torr x 1 sec) 산소 노출량과 -15$0^{\circ}C$ - $25^{\circ}C$의 표면온도 그리고 5eV - 20eV의 Cs+ 이온 충돌에너지에서 CsSiO+ 이온이 유일한 생산물로서 검출되었다. CsSiO+ 이온은 입사된 Cs+ 이온과 표면에 존재하는 SiO 분자가 충돌 후 반응하여 탈착된 것으로 생각된다. 이것은 낮은 산소 노출량 즉, 초기 산화 단계에서 SiO가 표면에 존재한다는 것을 의미한다. 즉, 산소 분자는 산화단계의 초기에 해리되어 표면에 흡착되고 선구물질인 SiO를 형성함을 제시한다. 최근의 이론적 계산인 density functional calculation에서도 산소분자가 Si(111)-7$\times$7 표면의 준안정적 산화상태의 선구물질일 가능성을 배제한다. 이는 본 저에너지 Cs+ 이온 반응성 산란실험을 뒷받침하는 계산 결과이다. 높은 Cs+ 이온 충돌에너지에서 CsSi+, Si+, SiO+, Si2+, Si2O+ 등이 추가로 검출되었다. 이는 CsSi 이온을 제외하고 수 keV의 충돌에너지를 사용하는 이차 이온 질량 분석법과 비슷한 결과이다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.4
• /
• pp.42-49
• /
• 2012

Critical speed of high thrust liquid rocket engine turbopump is obtained through a rotordynamic analysis and a unloaded turbopump test is peformed for validation of the numerical model. The first critical speed predicted by the numerical analysis is correlated well with the test result for the bearing unloaded rotor condition only considering mass unbalance load. Using the previous rotordynamic model, critical speed variation is estimated as a function of varied bearing stiffness due to pump and turbine radial loads with relative angle difference. From the numerical analysis, it is found that the relative angle difference of pump and turbine radial loads greatly affects the critical speed. However, additional axial load reduces the effect derived from the relative angle difference of radial loads.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.565-572
• /
• 2019

In this study, shielding analysis of material and thickness of 3D printer filaments was performed for the manufacture of custom shielding by radiation workers during outdoor radiographic test. The shielding was attached to the ICRU Slab Phantom after selecting the voxel source $^{192}Ir$ and $^{75}Se$ through simulation using MCNPX, and the distance between the source and the slab Phantom was set at 100 cm. The 12 shielding materials were divided into 5 mm units up to 200 mm from the absence of shielding materials to evaluate the energy absorbed per unit mass of each shielding material. The results showed that the shielding effect was high in the order of ABS + Tungsten, ABS + Bismuth, PLA + Copper, PLA + Iron from all sources of radiographic test. However, compared to lead, the shielding effect was somewhat lower. Based on this study in the future, further study of the atomic number and the high density filament material is necessary.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.1
• /
• pp.149-159
• /
• 2008

In this paper, we propose a blind watermarking algorithm of 3d mesh model using spherical parameterization. Spherical parameterization is a useful method which is applicable to 3D data processing. Especially, orthogonal coordinate can not analyse the feature of the vertex coordination of the 3D mesh model, but this is possible to analyse and process. In this paper, the centroid center of the 3D model was set to the origin of the spherical coordinate, the orthogonal coordinate system was transformed to the spherical coordinate system, and then the spherical parameterization was applied. The watermark was embedded via addition/modification of the vertex after the feature analysis of the geometrical information and topological information. This algorithm is robust against to the typical geometrical attacks such as translation, scaling and rotation. It is also robust to the mesh reordering, file format change, mesh simplification, and smoothing. In this case, the this algorithm can extract the watermark information about $90{\sim}98%$ from the attacked model. This means it can be applicable to the game, virtual reality and rapid prototyping fields.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.605-609
• /
• 2006

In this study, two kinds of smart accelerometers are investigated for the application of smart sensors to the structural health monitoring of infrastructures. Smart optical Fiber Bragg Grating (FBG) type and Micro-Electo-Mechanical System (MEMS) type accelerometers are selected for this study and the high sensitive ICP type accelerometer is used for the reference sensor. Small size shaking table tests were performed with 3-story shear building model using random input ground motions. The output only modal identification was carried out using stochastic subspace identification and the performances of sensors are compared in modal domain indirectly. The modal sensitivity method was applied to update the story stiffness of numerical model and the updated results were verified using the additional experiments for the same structure with additional mass.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.4
• /
• pp.341-348
• /
• 2023

In this study, basic skin characteristic data was measured by measuring skin hydration, skin sebum secretion rate, skin melanin index, skin redness index, skin redness image analysis, transepidermal water loss (TEWL), and amount of stratum corneum before and after creating a temporary high temperature and low humidity environments targeting Korean women in their 20s to 50s. Stratum corneum by tape stripping was collected at each measurement and skin biomarkers including total protein content, carbonylated protein, neutral lipid, and lipid peroxidation were analyzed. Based on the results, the differences before and after creating a high temperature and low humidity environments were confirmed, the correlation between skin characteristics and skin biomarkers was confirmed, and a new skin index was created based on this. The new skin index can be used in product efficacy evaluation, and the possibility of constructing a new clinical study method and using skin biomarker discovery research through additional research was confirmed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.145-152
• /
• 2015

In the study, the effects of damping devices on damping ratio increase and wind-load reduction were investigated based on the computational platform, which is one of the parametric modeling methods. The computational platform helps the designers or engineers to evaluate the efficacy of the numerous alternative structural systems for irregular Super-Tall building, which is crucial in determining the capacity and the number of the supplemental damping devices for adding the required damping ratios to the building. The inherent damping ratio was estimated based on the related domestic and foreign researches conducted by using real wind-load records. Two types of damping devices were considered: One is inter-story installation type passive control devices and the other is mass type active control devices. The supplemental damping ratio due to the damping devices was calculated by means of equivalent static analysis using an equation suggested by FEMA. The optimal design of the damping devices was conducted by using the computational platform. The structural element quantity reduction effect resulting from the installation of the damping devices could be simply assessed by proposing a wind-load reduction factor, and the effectiveness of the proposed method was verified by a numerical example of a 455m high-rise building. The comparison between roof displacement and the story shear forces by the nonlinear time history analysis and the proposed method indicated that the proposed method could simply but approximately estimate the effects of the supplemental damping devices on the roof displacement and the member force reduction.