• Journal of Energy Engineering
• /
• v.5 no.1
• /
• pp.34-41
• /
• 1996

The heat of evaporation (cold energy) of LNG is the energy consumed in the production of LNG. This energy amounts to 14% of the NG. In Pyungtak LNG terminal, it is about 96 MW in 1993. In order to utilize the cold energy, the cold power generation systems are investigated: The Rankine cycle using the low temperature energy, the partial expansion cycle using the pressure energy, and the Linde process which is a combined cycle of the Rankine and the partial direct expansion cycle. The commercial simulator, ASPEN Plus, is used. The conceptual design data are obtained from the current facilities of the Pyungtak LNG terminal. The performances of three systems are evaluated. The amount of electric power ranges iron 3 MW to 6MW. The optimum energy efficiency is about 37%. The optimum design conditions are obtained for the partial direct expansion (PDE) cycle. The performance of the PDE cycle is supposed to be comparable to that of the Rankine cycle if the areas of the total heat exchanger of the both cycle are equal.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.172-177
• /
• 2011

This study was conducted to establish the optimal condition for in vitro propagation of wild Cynanchum wilfordii. The highest in vitro seed germination rate of 91.6% was obtained from the seed treated with gibberellic acid ($GA_{3}$) (100 ppm) for 24 hours followed by cultured on Woody Plant Medium (WPM) media supplemented with 1.0 mg/L 6-benzyl adenine (BA). The best shoot height obtained (5.2 cm) in medium with 1.0 mg/L $GA_{3}$, but the plants was grown abnormally and eventually died. The highest number (2.4) was shown when shoot were in cultured on the media including 0.1 mg/L BA after 4 weeks. Root induction from shoot obtained in vitro culture was effective on ventilation and without plant growth regulators (PGRs) and root length was highly developed (2 cm) at 0.1 mg/L naphthalene acetic acid (NAA). The highest survival rate (70%) was when plantlet grew pre-ventilation of in vitro condition.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.749-751
• /
• 2022

본 논문은 코로나19로 인해 가정에서 생활하는 시간이 길어진 현재 스마트 IoT시스템을 기반으로 각종 환경에 따라 자동으로 창문을 여닫는 "지능제어기를 활용한 스마트 창문"(이하 "윈도우 플러스")을 제안한다. 본 논문이 제안하는 주요한 특징은 다음과 같다. 첫째, 여러 가지 센서와 모터, 라즈베리파이를 이용하여 센서 입력 값에 따라 창문 개폐를 결정한다. 둘째, 안드로이드 어플리케이션과 윈도우 플러스-휴대폰 간 블루투스 통신을 이용하여 창문에 입력되는 대기 환경 수치를 실시간으로 표시한다. 셋째, 실내모드와 실외모드를 구분지어 설정할 수 있으며, 이는 사용자로 하여금 실내 대기 상태를 최적으로 만들 수 있도록 한다. 넷째, 창문의 개폐 여부를 telegram을 통해 사용자가 알 수 있도록 하며, 실내 환경의 보안성을 제공하고. 채팅을 통해 원격제어를 한다. 제안하는 시스템은 기존 수동방식의 창문으로부터 사용자의 편의성을 증가시키고, 자동 환기를 통해 코로나19의 전파를 방지하는데 도움을 줄 수 있는 "윈도우 플러스"의 개발을 목표로 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.6
• /
• pp.517-525
• /
• 1984

This paper presents a typical solar domestic hot water system and estimates their performances with variance of collector size, storage volume, collector tilt and other factors. The analysis is performed by th computer simulation for which conceptual system against 8760 hourly solar intensities and ambient temperature for a model year stored in the computer has been running. System performance is analyzed on hourly, monthly and yearly basis respectively and at the same time, the economics of various systems are evaluated. And also, this paper shows how an optimized design can be selected for any locality for which solar data and collector performance are provided. The results of this study are as follows. (1)Storage volume of 45 liter per square meter of solar collector lead to the best design. (2)Tilting the collectors to the same angle of the latitude is generally the best (3)Optimal size of collector is approximately 6.68-8.35m$^{2}$ when the latitude is 37.6 .deg. N and storage volume is 300 liter. (4)The performances of a solar domestic hot water system does not depend on the hourly usage but the daily usage.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.1
• /
• pp.121-127
• /
• 2023

In this study, the design conditions and CFD analysis results are compared and reviewed in SCR that can optimally reduce nitrogen compounds. To this end, it was analyzed and compared using CFD to see if the design criteria were satisfied for the shell and tube areas of the boiler. In the SCR system, the analysis area is the gas/air heat exchanger on the shell side, and eight tubes of the gas/air heat exchanger on the tube side. Through CFD analysis, the gas velocity distribution on the primary catalyst side of the SCR system was designed to be 2.4%, and the NH3/NOx molar ratio distribution was 3.7%, which satisfied the design criteria. In addition, the uniformity of the temperature distribution was confirmed and the required condition of 260℃ or higher was satisfied. The angle of the gas entering the catalyst met the design conditions at 2.9 degrees, and the pressure loss that occurred also satisfied the design requirements. Through this CFD analysis, it was confirmed that it was designed and operated by satisfying the design conditions required for each area.

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.1
• /
• pp.18-23
• /
• 2016

A HVAC(Heating Ventilation and Air Conditioning) is adapted to increase the comfort of the cabin environment for train. The train HVAC duct system has very long duct and many outlets due to the shape of a train set. the duct cross section shape is limited by a roof structure and equipments. Therefore, the pressure distribution and flow uniformity is an important performance indicator for the duct system. In this study, the existing blow down type HVAC duct system for a train was supplemented to improve the flow uniformity by applying a design method combining design of experiment (DOE) with numerical analysis. The design variables and the test sets were selected and the performance for each test set was evaluated using CFD(Computational Fluid Dynamics). The influence of each design variable on the system performance was analysed based on the results of the performance evaluation on the test sets. Furthermore, the optimized model, whose the flow uniformity was improved was produced using the direct optimization(gradient-based method). Finally, the performance of the optimized model was evaluated using numerical analysis, and it was confirmed that its flow uniformity has indeed improved.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.8
• /
• pp.1219-1226
• /
• 2013

This study is the analysis and verification process of the L-band satellite communications repeater thought PCB & circuit EM analysis. System performance can be vulnerable to various spurious inside the L-band satellite transponder, power conversion board, digital signal board, TM/TC board, such as control panels and blocks that are linked signal components when the winch is increased due to the noise component. So the whole system can cause performance degradation. PCB resonance analysis and EM simulation can be easily analyzed for a variety of optimal. Also, by setting the ports on the PCB, H/W designer wants to can easily analyze system.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.727-728
• /
• 2023

최근 국내 축산 인구의 감소 및 고령화가 빠르게 진행되고 AI, 구제역 등 가축 질병의 잦은 발생으로 축산업이 위기를 겪고 있고 기존의 축산 형태는 급이, 급수를 직접 관리하고 가축의 발정 및 분만 시기를 놓쳐 생산성이 감소하는 불편함이 있다. 본 논문은 기존의 축산 시스템에서 정보통신기술을 융합시킨 'ICT 기술을 활용한 스마트 축산'을 제안한다. 공기질센서, 온습도센서 등을 활용하여 축산 내부 환경을 체크하고, 자동으로 급수 및 급이기, 환기팬, 창문개폐, 생균제 분사가 작동하여 축산의 환경을 최적의 상태로 관리하여 준다. 그리고 스마트폰을 이용하여 원격으로 스마트 축산을 원격제어 및 감독할 수 있어 관리자의 불편함을 최소화 할 수 있다. 또한, 발정측정기를 사용해 소의 발정 시기를 탐지하여 생산성을 높일 것이다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.1
• /
• pp.22-28
• /
• 2013

The heat transfer characteristics of LNG(Liquefied Natural Gas) vaporizer on the ship was performed by numerical simulation to get the optimum NG(Natural Gas) generating condition. The glycol-water was used for heating in LNG vaporizer, and the cooling water of main engine was used as heating souse for glycol-water. This cooling water temperature increases again after recirculating from the main engine, and then it can be used to heat the glycol-water. The numerical analysis results has good agreement with the experimental results by liquid nitrogen for validation. So CFD technique was used to simulate the heat transfer characteristics of LNG vaporizer on the ship. The numerical results show that the operation condition of LNG vaporizer shows NG temperature of $6^{\circ}C$ in the outlet of LNG vaporizer, and the mass flow rates of LNG and glycol-water were showed 0.111 kg/s and 1.805 kg/s, respectively.

• Journal of the Korean Institute of Gas
• /
• v.27 no.1
• /
• pp.63-69
• /
• 2023

Although Korea is the world's No. 1 semiconductor producing country, most studies are conducted with risk assessment for simple material risks due to the closedness of the site for industrial protection. In terms of industrial safety, a monitoring system such as a gas detector to determine the leakage of hazardous substances has been established, but research on effectively discharging harmful gastritis substances in case of leakage has only recently begun. Semiconductor manufacturing facilities (gas boxes) where a large amount of flammable materials are handled are currently being safety managed by using a gas detector and blocking the air inlet. It is difficult to dilute in a short time in case of leakage of flammable substances. Therefore, in this study, based on various criteria, the size of the duct according to the size of the gas box is determined and the appropriate size of the air inlet is studied to minimize the exhaust performance requirement without exposing hazardous chemicals to the outside in the event of a flammable leak. We want to do an optimal exhaust design.