• Pediatric Infection and Vaccine
• /
• v.20 no.2
• /
• pp.71-80
• /
• 2013

Objectives: Outbreaks of pneumonia caused by Mycoplasma pneumoniae (MP) occur every 3-4 years in Korea, most recently in 2011. The aim of our study was to determine the optimal time to perform indirect particle agglutination antibody assays to improve early diagnosis of MP pneumonia in children. Methods: A database of 206 pediatric patients treated for pneumonia at the Hanyang University Hospital from June to October 2011 was analyzed retrospectively for demographic characteristics and laboratory test results. Results: Among the 206 patients treated for pneumonia during the study period, there were 160 children (mean age, 5.44 years) diagnosed with MP pneumonia, who were studied further. The mean age of these MP pneumonia patients was 5.44 years. Antibody titers increased with increasing time between symptom onset and the collection of serum collection: MP titers were <1:640 for sera collected after 5.44 days and titers ${\geq}1:640$ for those collected after 8.58 days; P<0.001). Antibody titers were considered positive when they reached ${\geq}1:640$. In 42 MP pneumonia patients in whom there was a four-fold or greater increase in titer between successive serum samples, the optimal cut-off time-point for distinguishing between the initial and second titer groups was 7.5 days after the onset of symptoms (sensitivity, 90.5%; specificity, 92.9%). Conclusions: Negative MP antibody titers earlier than 8 days after the onset of symptoms in children with pneumonia may require repeating to confirm the diagnosis. This finding could optimize diagnosis and result in better therapeutic outcomes of MP pneumonia in children.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.1-14
• /
• 2017

For the removal of cesium (Cs) from high radioactive/high salt-laden liquid waste, this study synthesized a highly efficient composite adsorbent (potassium cobalt ferrocyanide (PCFC)-loaded chabazite (CHA)) and evaluated its applicability. The composite adsorbent used CHA, which could accommodate Cs as well as other molecules, as a supporting material and was synthesized by immobilizing the PCFC in the pores of CHA through stepwise impregnation/precipitation with $CoCl_2$ and $K_4Fe(CN)_6$ solutions. When CHA, with average particle size of more than $10{\mu}m$, is used in synthesizing the composite adsorbent, the PCFC particles were immobilized in a stable form. Also, the physical stability of the composite adsorbent was improved by optimizing the washing methodology to increase the purity of the composite adsorbent during the synthesis. The composite adsorbent obtained from the optimal synthesis showed a high adsorption rate of Cs in both fresh water (salt-free condition) and seawater (high-salt condition), and had a relatively high value of distribution coefficient (larger than $10^4mL{\cdot}g^{-1}$) regardless of the salt concentration. Therefore, the composite adsorbent synthesized in this study is an optimized material considering both the high selectivity of PCFC on Cs and the physical stability of CHA. It is proved that this composite adsorbent can remove rapidly Cs contained in high radioactive/high salt-laden liquid waste with high efficiency.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.7
• /
• pp.343-352
• /
• 2016

Effects of grinding time and chemicals dosage in arsenic removal from contaminated paddy soil in China were investigated using lab scale attrition and froth flotation combining process. Arsenic concentration in the field soil was 76.51 mg/kg, exceeding Korean and Chinese standards, and predominant arsenic compounds fraction in sequential extraction was "residual" (over 80%). After wet sieving, soil with >2 mm and < 0.038 mm showed concentration lower than 'Warning Level' in Korea. Soil with 0.038-0.075 mm, showing the highest concentration, was discarded since it occupied minor weight fraction (10.1%). Thus soil between 0.075 and 2 mm was only used in the combining process. The highest Arsenic concentration in progeny fragments smaller than 0.038 mm reached up to 981.66 mg/kg after 5 min of attrition. Optimal dosage of collector ($C_5H_{11}OCS_2K$) and modifier ($Na_2S$ and $CuSO_4$) in froth flotation process for the selective separation of the chipped progeny particles from the parent fragments were determined both as 200 g/ton. Arsenic removal efficiency in froth flotation process was 38.47% and it was increased to 72.74% in additional flotation process, scavenging. Average arsenic concentration after overall process - wet sieving, attrition and froth flotation - was estimated to 16.45 mg/kg.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.17-17
• /
• 2001

착상전 수정란 단계에서 형질전환 수정란의 선발은 형질전환동물의 효율을 증대시킬 수 있는 방법이다. 성공적인 형질전환동물의 생산을 위해서는 생산된 수정란의 mosaicism 빈도를 감소시켜 전체 할구에서의 유전자 발현을 유도하는 것이 최적일 것이다. 따라서 본 연구에서는 돼지의 웅성 생식세포를 이용한 형질전환동물의 생산에 있어서 다양한 정자세포 이용시 형질전환 수정란의 생산성 및 mosaicism 빈도를 조사하였다. 아울러 돼지 웅성생식세포내 GFP 유전자도입시 세포들의 생존율 및 원형정자세포분리 후 배양에 따른 형태적 변화를 관찰하였다. 돼지의 웅성 생식세포내 GFP 유전자 도입은 전기자극법 (1.3 ㎸/cm, 200 $\mu\textrm{s}$) 에 의하여 수행되었으며, 이 때 생존율은 60-70%이였다. 유전자가 도입된 전체 세포중 원형정자세포군의 분리는 유식세포분리기에 의하여 수행하였으며, 전체집단에 대한 분리군의 비율은 평균 16.2%이였다. 형질전환 수정란의 생산은 정자 (ICSI), 원형정자세포 (ROSI), 배양후 확장된 원형정자세포(ELSI)를 이용하였으며 각각의 난할율은 ICSI (82.9%), ROSI (59.1%), ELSI (62.1%)로 유의한 차이를 나타내었다. 그리고 8세포기까지의 배발달율은 각각 61.1, 40.9 및 48.6%이였으며, 상실배 및 포배기형성율은 각각 24.6, 18.1 및 32.4%이였다. 형광현미경하에서 GFP 단백질이 발현된 8세포기 수정란을 대상으로 각각의 할구를 primer extension pream-plification (PEP) PCR 방법으로 분석한 결과, ICSI 및 ROSI 실시후 대부분 (15/20, 9/10) 의 수정란은 3~4개의 할구에서만 GFP 유전자의 존재여부를 확인할 수 있었으며, 전체 할구에서 GFP 유전자가 모두 확인된 수정란은 없었다. 반면에 배양된 확장 원형정자세포를 이용하여 생산한 수정란의 경우, 4/10 (40%)에서 전체 할구내에 GFP 유전자의 존재를 확인할 수 있었다. 이러한 결과는 비록 배발달율 및 GFP 유전자 발현율에 있어서는 ELSI방법이 ICSI 등의 방법보다 현저히 낮았지만, mosaicsism 빈도가 낮아 바람직한 형질전환 수정란 생산에서는 오히려 유용한 방법이라고 사료된다. 또한 외래 유전자의 도입효율 면에서 후기 원형정자나 성숙정자보다 초기 원형정자세포에 외래유전자를 도입한 다음, 성숙시킨 확장원형 정자세포를 이용하는 방법이 보다 우수하다는 것을 시사하였다. 따라서 본 연구결과는 포유동물의 웅성 생식세포를 이용하여 nonmosaicisn을 나타내는 형질전환수정란을 생산하고 선발할 수 있는 일련의 기술적 과정을 정립하였다고 사료된다.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2004

Copper(II) sorbed on kaolinite (KGa-lb) was studied using electron paramagnetic resonance (EPR) and extended X-ray absorption fine structure (EXAFS) spectroscopy. The sorbed copper(II) had an isotropic EPR signal with $g_{iso}\;=\;2.19$ at room temperature. At 77 K, the isotropic signal converted to an axially symmetric anisotropic signal with $g_{\$\mid$}\;=\;2.40,\;g_{\bot}\;=\;2.08,\;and\;A_{\$\mid$}\;=\;131\;G$. These EPR results suggest that the sorbed copper(II) forms an outer-sphere surface complex with a tetragonally distorted $CuO_{6}$ octahedral structure on the kaolinite. In the sorption measurement, the amount of sorbed copper increased with increasing pH of the solution. However, the intensity of the isotropic EPR line was not directly proportional to the amount of sorbed copper. This discrepancy was resolved by assuming the formation of a surface precipitate at higher pH that is invisible by EPR. The EXAFS data confirmed the existence of the surface precipitate. The best fit for the EXAFS of the sorbed copper showed that each copper on the kaolinite had 6.8 copper neighbors located $3.08\;{\AA}$ from it, in addition to the first shell oxygen neighbors, including 4 equatorial O at $1.96\;{\AA}$ and 2 axial O at $2.31\;{\AA}$. This work shows that the local environment of the copper sorbed on the kaolinite changes as a function of pH and surface loading, and that the EPR and EXAFS are useful in studying such changes.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.3
• /
• pp.135-141
• /
• 2013

Mechanical alloying was carried out to produce $CrSi_2$ thermoelectric compound using a mixture of elemental $Cr_{33}Si_{67}$ powders. An optimal milling and heat treatment conditions to obtain the single phase of $CrSi_2$ compound with fine microstructure were investigated by X-ray diffraction and differential scanning calorimetry measurement. $CrSi_2$ intermetallic compound with a grain size of 70 nm could be obtained by MA of $Cr_{33}Si_{67}$ powders for 70 hours and subsequently annealed at $650^{\circ}C$. Consolidation of the MA powders was performed in a spark plasma sintering (SPS) machine using graphite dies at $600{\sim}1000^{\circ}C$ under 60 MPa. The shrinkage of MA samples during SPS consolidation process increased gradually with increasing temperature up to $1000^{\circ}C$ and relatively significant at about $600^{\circ}C$. We tend to believe that these behaviors are deeply related to form a $CrSi_2$ compound during heating process, as can be realized from the DSC measurement. Electrical conductivity and Seebeck coefficient of sintered bodies were measured up to $900^{\circ}C$. Seebeck coefficient and power factor of $Cr_{33}Si_{67}$ compact prepared by MA and SPS at $1000^{\circ}C$ showed the maximum value of $125{\mu}V/K$ at $400^{\circ}C$ and $4.3{\times}10^{-4}W/mK^2$ at $350^{\circ}C$, respectively.

• The KIPS Transactions:PartB
• /
• v.11B no.3
• /
• pp.309-316
• /
• 2004

In this paper, we proposed the TDS(T-shape Diamond Search) based on the directions of above, below, left and right points to estimate the motion vector fast and more correctly in this method, we exploit the facts that most motion vectors are enclosed in a circular region with a radius of 2 fixels around search center(0,0). At first, the 4 points in the above, below, left and right around the search center is calculated to decide the point of the MBD(Minimum Block Distortion). And then w. above point of the MBD is checked to calculate the SAD. If the SAD of the above point is less than the previous MBD, this process is repeated. Otherwise, the right and left points of MBD are calculated to decide The points that have the MBD between right point and left point. Above processes are repeated to the predicted direction for motion estimation. Especially, if the motions of image are concentrated in the crossing directions, the points of other directions are omitted. As a result, we can estimate motion vectors fast. Experiments show that the speedup improvement of the proposed algorithm over Diamond Search algorithm(DS) and HEXgon Based Search(HEXBS) can be up to 38∼50％ while maintaining similar image Quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3C
• /
• pp.247-254
• /
• 2008

H.264 provides a good coding efficiency compared with existing video coding standards, H.263, MPEG-4, based on the use of multiple reference frame for variable block size motion estimation, quarter-pixel motion estimation and compensation, $4{\times}4$ integer DCT, rate-distortion optimization, and etc. However, many modules used to increase its performance also require H.264 to have increased complexity so that fast algorithms are to be implemented as practical approach. In this paper, among many approaches, fast mode decision algorithm by skipping variable block size motion estimation and spatial-predictive coding, which occupies most encoder complexity, is proposed. This approach takes advantages of temporal and spatial properties of fast mode selection techniques. Experimental results demonstrate that the proposed approach can save encoding time up to 65% compared with the H.264 standard while maintaining the visual perspectives.

• The Journal of Bigdata
• /
• v.4 no.1
• /
• pp.63-72
• /
• 2019

For power energy, optimal generation and distribution plans based on accurate demand forecasts are necessary because it is not recoverable after they have been delivered to users through power generation and transmission processes. Failure to predict power demand can cause various social and economic problems, such as a massive power outage in September 2011. In previous studies on forecasting power demand, ARIMA, neural network models, and other methods were developed. However, limitations such as the use of the national average ambient air temperature and the application of uniform criteria to distinguish seasonality are causing distortion of data or performance degradation of the predictive model. In order to improve the performance of the power demand prediction model, we divided Korea into five major regions, and the power demand prediction model of the linear regression model and the neural network model were developed, reflecting seasonal characteristics through regional characteristics and migration period learning techniques. With the proposed approach, it seems possible to forecast the future demand in short term as well as in long term. Also, it is possible to consider various events and exceptional cases during a certain period.

• Journal of Mushroom
• /
• v.5 no.2
• /
• pp.51-58
• /
• 2007

These experiment was conducted to find the superior strain selection, cultivation technique and optimum environmental condition of nameko mushroom culture using plastic container. The results was following as Mycelium of Pholiota nameko grown well at MCM and Hamada media, and its media acidity was pH 6~7. The optimum temperature condition for growing mycelium was $25^{\circ}C$. Under $15^{\circ}C$ and above $30^{\circ}C$ of temperature condition, mycelium growing speed was delayed remarkably. Among the 29 strains of nameko mushroom, the most productive strains was JNM19007, JNM19026, JNM19027 and JNM19028. The optimum media composition rate for produce fruitbody was pine sawdust 80% + wheat bran 20%. In this condition, the average fruitbody amount was 188g per 1,100cc container. The optimum post-culturing period was 50 days and mushroom sprout appeared 7 days after old mycelia removed. The suitable temperature was $12^{\circ}C$ for induce sprout, growing period was $16^{\circ}C$ and the optimum relative humidity was 95% in all culturing periods.