• Journal of Korean Society of Forest Science
• /
• v.81 no.4
• /
• pp.346-356
• /
• 1992

The extensive Snake River floodplain in Northwest United States has experienced major changes in water channels and vegetation types due to floodings. To detect the change of wetland cover-types for the period of 1985 and 1988, post-classification comparison and image differencing change detection techniques were evaluated using Landsat-5 TM digital data. Differenced infrared-band images indicated better accuracy indices than any visible-band images. A thresholding technique was applied to identify the change and no change categories from the transformed images produced by image differencing. The problems in using different accuracy indices, including the Kappa coefficient of agreement, overall accuracy, producer's accuracy, user's accuracy, and average accuracy(based on both the producer's and user's accuracy approaches) in determining an optimal threshold level, were examined.

• The Journal of the Korea Contents Association
• /
• v.6 no.10
• /
• pp.107-113
• /
• 2006

Error Concealment method for Intra frames in H.264 reconstructs the lost block by computing weighted average value of the boundary pixels of the neighboring blocks; up, bottom, left and right blocks. However a simple average of pixel values of the neighboring blocks for Intra frames in H.264 leads to excessive blurring and degrades the picture quality severely. To solve this problem, in this paper we estimate the dominant edge of lost block using the pixel values of the neighboring blocks and reconstruct the pixel values by choosing adaptive interpolation between directional interpolation and weighted average interpolation considering the result value of the interference function based on statistics. Finally directional interpolation method improves by determining the dominant edge direction considering the relation of the dominent edge and the edges of neighboring blocks. Experiments show improvement of picture quality of about $0.5{\sim}2.0dB$ compared with the method of H.264.

• Korean Journal of Materials Research
• /
• v.2 no.6
• /
• pp.461-467
• /
• 1992

A fabrication process for SiC whisker preform reinforced AC4A Al composites is being developed. The Al alloy used as the matrix in this study is AC4A. SiC whisker preform made by Tokai Carbon Co. Ltd. Shizuoka, Japan were used. These consisted of $\beta$-type single crystals 0.1 ~ 10${\mu}$m in diameter and 20~10${\mu}$m in length. The most adequate fabrication condition was that whisker preform was preheated up to 750~80$0^{\circ}C$, set into a mould preheated to ~40$0^{\circ}C$, molten Al alloy heated to ~80$0^{\circ}C$ and applied pressure 75MPa. And Si$C_w$reinforced AC4A composite was advanced above twice than AC4AI/M. Also it was not large effect by pressure at Si$C_w$ 20v/o.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.1
• /
• pp.3-9
• /
• 2016

This study proposes a approximate cost estimation system based on Excel with VBA using weighted CBR(Case Based Reasoning). One characteristic of this system is that it generates the sheet automatically as many as the number of similar case and new estimation when it performs a case learning and a new estimate and cell formula is automatically entered into each sheet. User can be free to compose a combination of attribute factors because they can select up to ten attribute factors. This paper presents an applicability of estimation model for estimating the soil remediation cost when it use a landfarming method. When compared to a estimation model by using average unit cost and optimum multiple regression, this model shows a better result. This study was aimed at landfarming method, but it is expected that a cost estimation model using CBR will be more likely to apply in soil remediation technologies which various remediation technologies and pollutant species exist.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.889-894
• /
• 1999

Preparation of micron size polymer particles which have desired morphology, size, and structure by emulsion polymerization is very difficult due to coagulation of latex particles and formation of second generation particles. But there are attractive merits such as preparation of structural and functional polymer particles in seeded emulsion polymerization. Seeded emulsion polymerization of n-butyl acrylate(BA) was carried out to investigate the effects of stirring rate, reaction temperature, concentration of initiator, emulsifier, and cross-linking agent on the particle size and size distribution. By the combination of suitable reaction conditions, we succeeded in preparing $0.14{\sim}3.67{\mu}m$ diameter of poly(n-butyl acrylate)(PBA) particles using sequential seeded emulsion polymerization.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.41-47
• /
• 2007

Crude copper phthalocyanine (Cupc) was synthesized by Wyler process, then grounded using various methods such as acid pasting, kneader, attritor and SC-mill. Particle size, shape and crystalline structure were compared and evaluated after particle size reductions. Cupcs prepared by acid pasting and kneader methods that are excellent manufacturing processes in industry were used as our standards. Particle properties of Cupcs prepared either by attritor or by SC-mill were compared with particle size analyzer, scanning electron microscopy (SEM) and X-ray diffraction (XRD). Particle size analyzer and SEM were used to analyze the variation of particle sizes of Cupc with milling time. Particle size was initially decreased up to the 90 min of milling time, thereafter it reversely began to increase in case of SC-mill. Cupc obtained from dry milling with attritor displayed strong cohesion so that particle size was not possible to determine with particle size analyzer. However, the optimum milling time was indirectly approximated from the analysis of XRD peak intensity.

• Journal of Korea Water Resources Association
• /
• v.42 no.3
• /
• pp.177-190
• /
• 2009

Rehabilitation projects for old water mains typically require considerable capital investments. One of the economical ways of pursuing the rehabilitation projects is to focus on a specific area within the entire region under management. In this paper the hierarchical clustering methods that analyze spatial inter-relationship of location data are applied to about 8,000 water leak location data recorded in a case study area from 1992 to 1997. Among the hierarchical clustering methods Single, Complete, and Average Linkage Methods are used to identify clusters of the water leak locations and to divide the area according to the defined clusters. By comparing the clusters identified by the clustering methods, the best clustering method for the case study area is suggested. Prioritization of the area for maintenance is obtained based on the water leak incident intensity for the clustered area using the suggested best clustering method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.347-347
• /
• 2020

하천수의 통합적인 물관리를 위해서는 농업용수의 목적으로 취수되는 하천수량과 같은 기초자료의 확보가 필수적이다. 취입보를 통해 취수되는 하천수량은 취수문에 근접한 농업용수로에서 유량을 계측할 수 있는데, 계측지점의 특성에 맞는 최적의 계측방법 선정 및 검증이 필요하다. 대부분의 농업용수로는 단면이 일정하여 수위-유량 관계 곡선식, 초음파 측정법, 수면경사법, 구조물법 등 대부분의 계측방법 적용이 가능한데, 본 연구에서는 전자파 표면 유속계를 이용해 산정한 유량자료와 실측 유량자료와의 적합성을 비교하여 전자파로 측정한 유량자료의 정확도를 확인하였다. 전자파 표면 유속계는 도플러 효과를 이용해 표면 유속을 산정하는 방식으로, 주로 홍수기와 같이 고유량 상황에서 사용되고 있고, 저유량이나 바람이 센 상황에서는 표면유속이 단면 전체의 평균유속을 대변하기 어려워 연중 지속적인 활용도가 낮은 상황이다. 농업용수로는 다양한 규모로 설계되어 있어 저유량에서부터 고유량까지 넓은 범위의 계측방안이 필요한데, 전자파 표면 유속계를 이용한 계측으로는 연속적인 자료 확보에 한계가 있다. 본 연구에서는 일정한 단면에서 전자파 표면 유속계와 실측 유속과의 비교를 통해 적정 수준의 정확도를 가질 수 있는 전자파 표면 유속계 측정범위를 특정하고, 저유량 구간에서 취약한 표면 유속 측정 자료를 보정할 수 있는 개선 방법을 적용하여 농업용수를 취수하는 지점에서 전자파 표면 유속계의 연중 상시 계측 가능 방안에 대한 연구를 수행하였다. 전자파 표면 유속계의 측정 범위 특정과 저유량 계측 개선 방안 등을 통해 추후 농업용수로의 하천수 취수량 계측 방법 선정에 도움이 될 것으로 기대한다.

• Journal of Food Hygiene and Safety
• /
• v.36 no.3
• /
• pp.228-238
• /
• 2021

The aim of this research was to develop a rapid and easy multi-residue method for determining dimethipin, omethoate, dimethipin, chlorfenvinphos and azinphos-methyl in agricultural products (hulled rice, potato, soybean, mandarin and green pepper). Samples were prepared using QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) and analyzed using gas chromatography-tandem mass spectrometry (GC-MS/MS). Residual pesticides were extracted with 1% acetic acid in acetonitrile followed by addition of anhydrous magnesium sulfate (MgSO₄) and anhydrous sodium acetate. The extracts were cleaned up using MgSO₄, primary secondary amine (PSA) and octadecyl (C₁₈). The linearity of the calibration curves, which waas excellent by matrix-matched standards, ranged from 0.005 mg/kg to 0.3 mg/kg and yielded the coefficients of determination (R²) ≥ 0.9934 for all analytes. Average recoveries spiked at three levels (0.01, 0.1, 0.5 mg/kg) and were in the range of 74.2-119.3%, while standard deviation values were less than 14.6%, which is below the Codex guideline (CODEX CAC/GL 40).

• The Journal of Information Technology
• /
• v.3 no.2
• /
• pp.73-85
• /
• 2000

The efficient algorithms are suggested in this study for solving the multicommodity network flow problems applied to Communications Systems. These problems are typical NP-complete optimization problems that require integer solution and in which the computational complexity increases numerically in appropriate with the problem size. Although the suggested algorithms are not absolutely optimal, they are developed for computationally efficient and produce near-optimal and primal integral solutions. We supplement the traditional Lagrangian method with a price-directive decomposition. It proceeded as follows. First, A primal heuristic from which good initial feasible solutions can be obtained is developed. Second, the dual is initialized using marginal values from the primal heuristic. Generally, the Lagrangian optimization is conducted from a naive dual solution which is set as ${\lambda}=0$. The dual optimization converged very slowly because these values have sort of gaps from the optimum. Better dual solutions improve the primal solution, and better primal bounds improve the step size used by the dual optimization. Third, a limitation that the Lagrangian decomposition approach has Is dealt with. Because this method is dual based, the solution need not converge to the optimal solution in the multicommodity network problem. So as to adjust relaxed solution to a feasible one, we made efficient re-allocation heuristic. In addition, the computational performances of various versions of the developed algorithms are compared and evaluated. First, commercial LP software, LINGO 4.0 extended version for LINDO system is utilized for the purpose of implementation that is robust and efficient. Tested problem sets are generated randomly Numerical results on randomly generated examples demonstrate that our algorithm is near-optimal (< 2% from the optimum) and has a quite computational efficiency.