• Microbiology and Biotechnology Letters
• /
• v.42 no.2
• /
• pp.194-201
• /
• 2014

Clitocybin A is a novel anti-wrinkle cosmetic agent produced by the strain from a Korean native mushroom Clitocybe aurantiaca. In this study, fermentation, extraction, and purification conditions for a large scale production of clitocybin A were optimized, and its cytotoxicity and inhibition activity on the expression of matrix metalloproteinase-1 (MMP-1) were characterized. The mass production of anti-wrinkle agent was achieved according to the 300 L fermentation process with a fed-batch cultivation using the modified yeast-maltose (YM) broth, and a total of 12.5 kg of cell mass was obtained in a 120 L culture broth for 14 days. After extraction and purification, clitocybin A was identified by HPLC. The cytotoxicity of clitocybin A was examined by the MTT assay. When assayed at 100 and 200 ${\mu}g/ml$ concentrations, clitocybin A showed no cytotoxicity, demonstrating safety. The inhibition activity of clitocybin A on the expression of MMP-1 was examined against UV irradiation. Oleanolic acid (control group) showed a relatively low MMP-1 inhibiting activity (ca. 16.7%) at 10 ${\mu}g/ml$ and showed increased cytotoxicity at higher concentrations. In contrast, clitocybin A showed no cytotoxicity at 100 ${\mu}g/ml$, and exhibited a relatively high MMP-1-inhibiting activity (33.1%). These findings indicate that clitocybin A may be a safe and effective anti-wrinkle agent for use in functional cosmetics.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.159-167
• /
• 2000

In recent years, combined and separated sewer overflows (CSOs, SSOs) have been recognized as a significant pollution problem. To solve this problem a series of experiments were performed in a small scale Rapid Floc Settler (RFS) device to determine its ability in removing micro particles and dissolved materials from polluted waters. The RFS device is a compact physico-chemical wasterwater treatment system. Polyacrylamide (PAM) is used as a coagulant for treating stormwater in the RFS. The results of Jar test showed that PAM could be an excellent coagulant as compared with aluminum sulfate. and ferric chloride. In several experimental conditions, the influence of different variation parameters was tested to measure the efficiency of the RFS. Tests have been carried out with typical CSOs concentrations (50~1.000mg SS/L). The treatment efficiency with regard to SS and COD, which can be obtained at an overflow rate of $130m^3/m^2/day$, are 90% and 80%, respectively. Comparing other sedimentation technologies with RFS, the overflows rate of RFS is ten times faster. The distribution of particle size and number were analyzed. The RFS is suitable for the treatment of CSOs and also the removal of settleable and dissolved materials in urban stormwater runoff.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.427-434
• /
• 2009

Indigenous bacterium which shows a tolerance to high metal toxicity was isolated from soil concomitantly contaminated with oil and heavy metals. The characteristics of the bacterium for Pb and Cd biosorption was investigated under the various experimental conditions such as bacterial growth phase, the initial metal concentration, the input biomass amount, temperature and pH. The Langmuir adsorption isotherm modeling was described to know the capacity and intensity of biosorption. The low initial concentration of heavy metals and high biomass has a maximum heavy metal removal efficiency, but biosorption capacity of Pb and Cd has different values. Biosorption efficiency was highest in the end of the microbial growth stage and under pH 5~9 condition, but was less affected by temperature variation of 25~$35^{\circ}C$. The maximum biosorption capacity for Pb and Cd was 62.11 and 192.31 mg/g, respectively and each $R^2$ was calculated as 0.71 and 0.98 by applying Langmuir isothermal adsorption equation. Biosorption for Cd was considered as monomolecular adsorption to single layer on the surface of cells, whereas biosorption for Pb was considered as accumulation process into the cell by the microbial metabolism and precipitation reaction with anion of bacteria.

• Journal of Navigation and Port Research
• /
• v.33 no.1
• /
• pp.57-63
• /
• 2009

In order to effectively isolate the marine wastes with an effluent standard, the pretreatment process is required to isolate solid materials from the liquid-solid mixed wastes. The more effective the pretreatment becomes, the more processing capacity of posttreatment will be improved and process facilities will be downsized. In this paper, we suggested the vibrating reverse-slant screen, investigated the optimal vibration frequency and vibrator installation angle for the separation of the liquid solid mixed wastes. Several experiments for separation efficiency were conducted under the condition of various vibration frequency($35{\sim}60Hz$, 5Hz interval) and vibrator angle($0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $90^{\circ}$) considering the crack of screen. The screen inclination angle is set up the gradient as $3^{\circ}{\sim}5^{\circ}$ through the preliminary experiments. Also, we made two types of screen(respectively rectangle and square screen). The separation device has shown the optimum efficiency at vibrator angle $0^{\circ}$ and vibration frequency 60Hz, and has no relation with the shape of screen. And the proposed technology is verified by comparing with quantity of suspended solids before and after filtration.

• Tunnel and Underground Space
• /
• v.27 no.3
• /
• pp.132-145
• /
• 2017

Shock loss was not applied for the tunnel ventilation of road tunnel in the past. However, pressure losses due to the shock loss can be significant in network double-deck road tunnel in which combining and separating road structures exist. For the optimum ventilation design of network double-deck road tunnel, this study conducted 3D CFD numerical analysis for the shock loss at the combining and separating flows. The CFD model was made with the real-scale model that was the standard section of double-deck road tunnel. The shock loss coefficient of various combining and separating angles and road width was obtained and compared to the existing design values. As a result of the comparison, the shock loss coefficient of the $30^{\circ}$ separating flow model was higher and that of the two-lane combining flow model was lower. Since the combining and separating angles and road width can be important for the design of shock loss estimation, it is considered that this study can provide the accurate design factors for the calculation of ventilation system capacity. In addition, this study conducted 3D CFD analysis in order to calculate the shock loss coefficient of both combining and separating flows at flared intersection, and the result was compared with the design values of ASHRAE. The model that was not widened at the intersection showed three times higher at the most, and the other model that was widened at the intersection resulted two times higher shock loss coefficients.

• Polymer(Korea)
• /
• v.28 no.5
• /
• pp.397-403
• /
• 2004

The sulfonated PET-g-GMA ion-exchange fine fibers were synthesized by UV radiation-induced graft copolymerization using a photoinitiator, and their chemical structure and adsorption properties were investigated. The optimum values for synthetic conditions - UV intensity, reaction time, and reaction temperature were 450 W, 60 min, and $40^{\circ}C$, respectively. Maximum values of the degree of sulfonation and ion exchange capacity were 8.12 mmol/g and 3.25 meq/g, respectively. Tensile strength of sulfonated PET-g-GMA fine ion exchange fibers was lower than that of PET trunk polymer as the grafting reaction rates increased. It was shown that as for the adsorption rate of $Ca^{2+}$ and $Mg^{2+}$ by the sulfonated PET-g-GMA fine ion exchange fibers, magnesium ion is slower than calcium ion in the solution. However, in the mixture of the calcium and magnesium ions, the adsorption rate of calcium ion was much slower than that of magnesium ion.

• Polymer(Korea)
• /
• v.32 no.6
• /
• pp.509-515
• /
• 2008

The aminated polypropylene melt blown ion exchange fibers were synthesized with acrylic acid monomer onto polypropylene melt blown fibers by radiation-induced polymerization and subsequent amination. Degree of grafting was increased with increasing the acrylic acid monomer concentration and total dose. The highest degree of grafting was obtained 140% at a monomer concentration of 20 v/v% acrylic acid and total dose of 4 kGy. Optimum condition of Mohr's salt was 5.0 $\times10^{-3}$ M. Degree of amination was increased with increasing degree of grafting. Water content was about 1.5 times higher than that of trunk polymer. The maximum ion-exchange capacity was 7.3 meq/g which was 2$\sim$3 times higher than a commercial ion exchange fiber. The average pore size was decreased and BET surface area was increased in order of PPmb, PPmb- g- AAc and APPmb- g- AAc. The average pore size and BET surface area of synthesised fibers were $366.1\;{\AA},\;3.71m^2/g,\;143.3\;{\AA},\;4.94m^2/g,\;40.97\;{\AA},\;8.98m^2/g$, respectively.

• Journal of KIISE:Databases
• /
• v.28 no.4
• /
• pp.702-714
• /
• 2001

As Internet technology evolves, there is growing need of Internet queries involving multiple information sources. Efficient processing of such queries necessitates the integrated summary data that compactly represents the data distribution of the entire database scattered over many information sources. This paper presents an efficient method of managing the integrated summary data based on the wavelet transform and addresses Internet query processing using the integrated summary data. The simplest method for creating the integrated summary data would be to summarize the integrated data sidtribution obtained by merging the data distributions in multiple information sources. However, this method suffers from the high cost of transmitting storing and merging a large amount of data distribution. To overcome the drawbacks, we propose a new wavelet transform based method that creates the integrated summary data by merging multiple summary data and effective method for optimizing Internet queries using it A wavelet transformed summary data is converted to satisfy conditions for merging. Moreover i the merging process is very simpe owing to the properties of the wavelet transform. we formally derive the upper bound of the error of the wavelet transformed intergrated summary data. Compared with the histogram-based integrated summary data the wavelet transformedintegrated summary data provesto be 1.6~5.5 time more accurate when used for selectivity estimation in experiments. In processing Internet top-N queries involving 56 information sources using the integrated summary data reduces the processing cost to 1/44 of the cost of not using it.

• Asian Journal of Turfgrass Science
• /
• v.23 no.2
• /
• pp.271-278
• /
• 2009

This study was conducted to investigate the effect of the mixture ratio of the inorganic soil amendments on the soil physicochemical properties. In this experiment, three kinds of soil amendments which had similar pH, EC and particle size, the A, B and C, were tested. The mixture ratio of soil amendment were 0%, 3%, 5%, 7% and 10% (V/V) incorporated with sand which met to the USGA(United State of Golf Association) particle standard. To analyze the effects of amendment on chemical soil properties, pH, EC(electrical conductivity) and CEC(cation exchangeable capacity) were measured. The porosity, bulk density and hydraulic conductivity also measured to analyze the changes of physical properties. In the chemical properties, pH was significantly related to the mixture ratios of amendments, A and C(P<0.05), CEC and EC also related to the ratios of C(P<0.01). When the results were applied to the USGA standard of the soil physical properties, the optimum mixture ratios of each amendment were 3% in A and B, and 7~10% in C. To analyze the corelation of mixture ratio versus to physical character, volume of porosity was significantly related to the ratio of B (P<0.05), and showed similar corelation in porosity and hydraulic conductivity with ratio of C(P<0.05). These results indicate that types and mixture ratio of inorganic soil amendments should affect on soil physio-chemical properties of root zone on USGA sand green.

• Journal of Life Science
• /
• v.31 no.7
• /
• pp.631-640
• /
• 2021

Houttuynia cordata Thunberg has been studied for a variety of pharmacological actions in traditional oriental medicine. In this study, we investigated the effects of Houttuynia cordata ethanol extract (HCE) on benign prostatic hyperplasia (BPH) models induced by castration and testosterone propionate (TP) injection. Thirty rats were divided into six groups. One group was used as a normal control, and the other groups were castrated and had intraperitoneal injections of TP for 14 days to induce BPH. A positive control group was given daily doses of finasteride (5 mg/kg) to the BPH model. Rats administered HCE (0.5, 1 or 2 mg/kg) instead of finasteride were compared with controls as experimental groups. There was no statistical significance in terms of prostate weight based on 100 g of body weight. The concentrations of 5-α reductase and dehydroxytestosteronre (DHT) were determined via ELISA tests, and there was a significant decrease in all experimental groups. The 0.5 mg/kg HCE group had the lowest level of 5-α reductase, and the 2 mg/kg HCE group had the lowest level of DHT. In the histopathological observation of prostates, the control and the 2 mg/kg HCE groups had normal cell shapes and no swelling. However, in the negative control group and the 1 mg/kg HCE group, the cells were swollen, and the gap between the cells was narrowed. In particular, in the 0.5 mg/kg HCE group, some cells were bursting. Therefore, the administration of more than 2 mg/kg of HCE is suitable to protect against BPH.