• Bulletin of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.28-31
• /
• 1995

워터제트(Waterjet) 추진의 개념은 선박용 스크류 프로펠러 만큼이나 오래 되었지만, 1960년대 까지도 많은 이용이 없었다. 왜냐하면 스크류 프로펠러가 더 간단하고 가벼우면서 훨씬 더 효 율적인 추진도구로 간주되어 왔기 때문이었다. 그러나 최근 수년 사이에 워터제트로 추진되는 세계적인 선박들 및 제작회사들의 수가 괄목할만한 증가를 보이고 있고, 선진국의 초고속선 개 발과 관령하여 워터제트 추진방식에 대한 새로운 시각에서의 연구가 활발히 진행되어지고 있 다[1]. 21세기 해상교통수당을 선도할 수 있으리라 판단되고 있는 초고속선 개발 연구를 수행하고 있는 선박·해양공학연구센터에서도 초고속선용 추진 장치로서 워터제트 추진기를 선택하였었 다[2]. 이러한 대표적인 이유로서는 종래의 일반적인 선박용 스크류 프로펠러로서는 고속 추진에 한계를 가지고 있는 반면, 워터제트 추진방식은 각 요소들의 최적 설계를 통해 고속에서의 추 진효율 향상을 꾀할 수 있기 때문이었다. 선진국에서는 이미 이러한 워터제트 추진에 대한 성 능해석 기법이 정립되어 있고[3], 중.소형 워터제트 추진기 제작을 통한 경험을 바탕으로 대출력 워터제트 추진기 개발도 가능한 단계이다[4]. 그러나 국내에서는 이에 대한 연구가 거의 없어 외국의 기술에 의존하고 있는 실정이다. 본 고에서는 워터제트 추진기의 기본적인 개념과 당 연구센타에서 수행하고 있는 모형시험법 개발 연구의 일부를 소개하고자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.1 s.145
• /
• pp.50-58
• /
• 2006

Free running model tests gives us only maneuvering indices not hydrodynamic derivatives. For this reason, system identification method has been applied to the measured data to identify mathematical model describing hydrodynamic force. However It is difficult to obtain complete set of maneuvering derivatives because of strong correlation of sway velocity and yaw rate. Therefore, in this paper, we assumed that sway velocity related coefficients would be obtained by oblique towing test. and then proposed new procedure to estimate yaw related coefficients. To do this, correlation and regression analyses were carried out to establish modified model and estimate maneuvering derivatives. Also D-optimal rudder input scenario was found based on the modified model and confirmed the validity of its sufficient richness as a input scenario.

• Economic and Environmental Geology
• /
• v.14 no.3
• /
• pp.193-201
• /
• 1981

The problem of automatic inversion of apparent resistivity sounding curves resulting from horizontally layered earth models is solved using the least-squares technique. This method, which makes use of damped least-squares algorithm in conjunction with digital filtering technique, is found to be speedier and more accurate than the conventional curve-matching method. Four sounding curves were chosen to test the inversion scheme. The analysis of the theoretical sounding data associated with a three-layer model illustrates clear advantages over the conventional curve-matching method. The usefulness of the inversion method is also shown when applied to the actual field data. It was found that the best fit earth models coincide with the subsurface structures confirmed by drilling.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.1
• /
• pp.60-73
• /
• 1989

Two field experiments were carried out to assess the applicability of a central composite design (CCD) in determining optimum culture condition of an early rice cultivar, Unbongbyeo in southern Korea. A central composite design with two replicates was applied to five levels of five factors such as the number of hills per 3.3m2, the number of seedlings per hill, the levels of nitrogen, the transplanting date and the seedling age (Experiment 1). The levels of planting density were ranged from 30 hills to 150 hills per 3.3m2 ; the number of seedlings per hill from 1 seedling to 9 seedlings per hill; the levels of nitrogen application from 1 kg/l0a to 21 kg/l0a; the transplanting date from June 15 to July 5; the seedling age from 25 days to 45 days. A fractional factorial design was applied to three levels of five factors tested in CCD (Experiment 2). Yield per hill and per unit area were examined and the results obtained from both experiments were compared. The benefits from the central composite design were discussed. Maximum yield of brown rice per unit area was obtained at the combination of the central levels of one of five factors when the other four factors were fixed at central point. Furthermore, brown rice yield per unit area affected by interaction of two factors was maximized at the central point when the remain three factors being fixed at the central level. The responses of five factors to brown rice yield per hill and unit area were found to be a saddle point in both designs. Actual values of the stationary points were 107 hills per 3.3 m2, 4 seedlings per hill, 10 kg nitrogen per l0a, transplanting date of rice on June 26 and 33 days of seedling age in the central composite design. Brown rice yield per unit area at the stationary points were estimated 439 kg/l0a in the central composite design and 442 kg/l0a in the fractional factorial design. Considering the number of experimental treatment combinations, the central composite design was rather convenient in reducing the number of treatment combinations for similar information. It was more convenient for an experimenter to present the results from the central composite design than those from the fractional factorial design. Considering the optimum yields of brown rice per unit area at the stationary points being verified as saddle points in both designs. inter-heterogeneity of each of the factors should be avoided in setting up factors in pursuit of inducing unidirectional response of the factors to yield. Even though both the lower and higher levels in the central composite design being beyond the region of an experimenter's interest. they were considered highly valued in interpretation of the results. Conclusively. the central composite design was found to be more beneficial to optimize culture condition of paddy rice even with several levels of various factors were involved.

• Korean journal of applied entomology
• /
• v.10 no.2
• /
• pp.91-95
• /
• 1971

Four species of Trichoderma causing green mildew of Agaricus bisporus were isolated from 38spots of mushroom growing areas in Korea. These are T. koningi, T. lignorum, T. glaucum and an unidentified species, and their frequencies of occurrence are $50\%,\; 32\%,\; 13\%; and\; 5\%$ respectively. All of these species grew well in potato dextrose, Waksman's and Richard's solution, and preferred acid (pH. 4) to neutral. The temperature in mushroom trouse should be kept at $15^{\circ}C$ during cropping period, not only for the high yield of mushroom but also for the prevention of green mildew of mushroom caused by Trichoderma spp . T. lignorum was killed in soil on an exposure of 60 minutes at $70^{\circ}C$ and when exposed for 30minutes at $80^{\circ}C$. Peak heat procedure of compost eliminated T. lignorum and T koningi.

• Composites Research
• /
• v.25 no.6
• /
• pp.198-204
• /
• 2012

The objective of this study is to improve the mechanical properties in abaca fabric/epoxy composites produced using a VARTM process. The mechanical properties were improved by increasing the surface roughness of the fabric through plasma polymerization and improving the interfacial adhesion between the epoxy and the fabric through changing its hydrophilic properties to the hydrophobic properties. Plasma polymerization at atmospheric pressure and room temperature was used, and the optimal polymerization time to improve the mechanical properties was investigated. NaOH treatment on the fabric was also carried out for the comparison. The composite fabricated using the fabric polymerized for 10 seconds shows the highest tensile strength compared to that of none-polymerized or NaOH treated. Plasma polymerization for more than 20 seconds exhibits decrease in the tensile strength. As a result, the plasma polymerization for more than 20 seconds may have caused some damages on the surface of the fabrics. Also, the hydrophilic abaca represents a tendency of presenting the hydrophobic properties in absorption and sedimentation tests.

• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.70-78
• /
• 1997

3Y-TZP/SUS316 Functionally Graded Material (FGM) was fabricated by slip casting method. Alumina mold was used to overcome problems of gypsum mold in slip casting process, and the optimal dispersion con-ditions of 3Y-TZP/SUS316 binary slurries was determined using electrokinetic sonic amplitude and a viscometer, and observing sedimentation behavior. The properties of the specimens casted by gypsum mold and alumina mold were compared in terms of changes in shrinkage rate, drying and sintering conditions, and microstructure. It was found that the specimens obtaine from the alumina mold showed a clean surface, easier thickness control of each layer, and higher productivity. Especially, no degradation was observed in the SUS316 prepared using alumina mold. Thus it is desirable to use porous alumina mold rather than gyp-sum mold for the slip casting of 3Y-TZP/SUS316-FGM.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.10
• /
• pp.1229-1237
• /
• 2013

In this study, the theory of spherical indentation based on incremental plasticity is extended to an indentation method for evaluating creep properties. Through finite element analysis (FEA), the point where the elastic strain effect is negligible and the creep strain gradient constant is taken as the optimum point for obtaining the equivalent strain rate and stress. Based on FE results for spherical indentation with various values of creep exponent and creep coefficient, we derive by regression an equation to calculate creep properties using two normalized variables. Finally a program is generated to calculate creep exponent and creep coefficient. With this method, we obtain from the load-depth curve creep exponents with an average error of less than 1.5 % and creep coefficients with an average error of less than 1.0 %.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.3
• /
• pp.177-182
• /
• 2007

The effects of three fuselage head shapes and nonplanar ground surface on the aerodynamic characteristics of FAST fuselages are investigated using a boundary element method. Wind tunnel test is also performed to validate the present method and to identify the wall effect on the frictional drag which cannot be analyzed using the present method. It is found that the channel has an effect of increasing the lift of those investigated fuselages. The optimal head shape depends on the design conditions of the FAST and its guideway channel. Comparing the calculated induced drag with the measured total drag, it can be concluded that the profile drag is independent of the ground height. Thus, the present numerical method can be applied to the conceptual design of the high-speed ground transporters if only the profile drag of the vehicle in free flight is assumed to be known.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.245-245
• /
• 2018

최근 도시화 및 산업화의 발달로 불투수면적이 증가함에 따라 건기 시 토지 표면에 축적된 오염물질이 강우유출수와 함께 하천으로 유출되는 등 수질오염의 가중과 불특정 지역에서 발생하는 비점오염원의 집중관리가 필요한 실정이다. 우리나라는 환경기초시설 등의 건설로 점오염원 관리는 강화되었지만, 비점오염원의 부하량은 점차 증가되고 있는 추세이며, 환경부 및 관계부처에서는 비점오염관리를 위한 여러 정책을 추진 중에 있다. 국내에서 사용하고 있는 비점오염저감장치는 자연형 시설과 장치형 시설로 구분되는데, 이 중 장치형 시설은 필터를 사용하여 비점오염저감의 효율성을 증가시키지만, 필터를 사용함으로써 유지관리 및 경제적인 측면에서 매우 불리하다. 이에 본 연구에서는 필터가 없는 장치형 시설을 고안하여 자연 순환기능을 최대한 유지하고, 오염물질을 최적으로 제거할 수 있는 방안을 마련하고자 수리실험을 통해 비점오염원의 제거효율을 분석하였다. 수리학적 상사법칙에 따라 원형대비 1/3축소모형과 2가지의 원형모형에 대해 총 3가지 모형에 대해 환경부에서 고시한 비점오염저감장치 기준을 뛰어넘는 유역면적, 강우강도 및 부유물질의 양으로 실험을 진행하였다. 실험결과는 유입수 농도에 대한 유출수의 농도로 계산하였으며, 장치에서 유출 직후 5분 간격으로 채취한 후, 수질공정시험법을 참고하여 부유물질에 대한 실험 중 하나인 유리섬유여과방법을 이용해 실험 결과를 도출하였다. 실험 결과, 본 연구에서 고안한 장치형 시설은 필터를 사용하지 않음에도 불구하고 환경부 기준인 부유물질 제거효율 80%이상을 만족한 것으로 나타나 현재 사용하고 있는 장치형 시설보다 유지관리 및 경제성 등이 우수할 것으로 기대된다.