• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1109-1113
• /
• 2010

창원시는 경제성장에 따른 도시화 현상으로 경작지나 녹지와 같은 투수지표면이 대단위 주택단지나 도로, 상업지구, 공장시설과 같은 불투수지표면으로 변화되어 전형적인 도시 유역특성을 띠고 있어 SWMM 모형의 적용에 적합하다. 적용대상인 남천은 창원시를 관류하는 유로연장 14.7 km의 하천으로 지류인 창원천을 포함하고 있으며, 2007년부터 환경부 지원 시범사업으로 생태하천복원사업이 계획되어 실시설계 완료 후 공사가 진행 중이나, 복원 후 하천관리를 위한 유지유량 산정 등의 타당성과 관련한 문제가 지역사회에서의 화두로 대두되고 있다. 따라서 본 연구에서는 남천 유역의 특성을 적절히 고려한 유지유량 산정을 통해 향후 복원된 남천의 하천관리기준을 제시하고자 하였다. 본 연구에서는 2008년 실측된 남천과 창원천의 유량자료와 SWMM 유출량 모의결과를 비교, 분석하였다. 남천의 유량자료는 2008년 5월 6일부터 8월 20일까지 실측하였으며, 남천의 지류인 창원천은 유량자료 취득구간이었던 창원천교 지점에서 생태하천복원사업이 진행됨에 따라 유량자료를 취득할 수 없었으므로 남천의 유량자료를 이용하여 비유량법으로 추정하였다. 유출량 산정을 위한 강우자료는 기상청 자료를 사용하는 것이 일반적이나 마산과 창원의 강우자료를 이용한 분석 결과 강우 패턴에 차이가 있음을 발견하고 마산기상대의 자료 대신, 창원시에서 제공한 5년간 (2005년~2009년)의 자료를 사용하였다. SWAT을 이용하여 남천 유역을 39개의 소유역으로 분할하고 Arc View를 이용하여 지형인자들을 추출하여 SWMM 입력자료로 사용하였다. 입력자료 중 유출량 추정에 큰 영향을 끼치는 매개변수들은 민감도 분석을 통하여 최적의 매개변수들을 결정하고 연유출량 추정을 위한 모의를 수행하였다. 이상의 과정을 통하여 남천의 연유출량을 추정함으로써 하천관리를 위한 유지유량 산정의 기초로 활용할 수 있었다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.5
• /
• pp.581-587
• /
• 2016

Braking is a basic and an important safety feature for all vehicles, and the final braking performance of a vehicle is determined by the vehicle's ABS performance and tire performance. However, the combination of excellent ABS and tires will not always ensure good braking performance. This is due to the fact that tire performance has non-linearity and uncertainty in predicting the repeated increase and decrease of wheel slip when activating the ABS, thus increasing the uncertainty of tire performance prediction. Furthermore, existing studies predicted braking performance after using an ABS that used a wheel slip control as a controller, which was different from an actual vehicle's ABS that controlled angular acceleration, therefore causing a decrease in the prediction accuracy of the braking performance. This paper reverse-designed the ABS that controlled angular acceleration based on the information on brake pressure, etc., which were obtained from vehicle tests, and established a braking performance prediction analysis model by combining a multi-body dynamics(MBD) vehicle model and a magic formula(MF) tire model. The established analysis model was verified after comparing it with the results of the braking tests of an actual vehicle. Using this analysis model, this study analyzed the braking effect by vehicle factor, and finally designed a tire that had optimized braking performance. As a result of this study, it was possible to design the MF tire model whose braking performance improved by 9.2 %.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.192-197
• /
• 2002

1. 실시간 모니터링 -온실 내부환경의 계측장치로 모듈화된 단일 칩 마이크로프로세서를 이용한 하우스 모니터를 개발하였다. 개발된 다수의 하우스 모니터는 RS-485통신을 이용하여 개발된 프로토콜을 통하여 그룹 모니터와 통신하면서 계측 데이터를 전송하였고 안정된 계측 성능을 보였다. 또한 그룹 모니터는 하우스모니터로부터 수신한 데이터를 인터넷 환경 TCP/IP 통신에 의해 서버에 정보를 전송하고 데이터베이스 서버에 저장할 수 있었다. 2. 클라이언트 서버 모델 -클라이언트 모니터를 통하여 허용된 사용자들은 해당 온실의 상황을 원격지에서 파악할 수 있는 있었다. 또한 분산환경 기술을 이용하여 서버를 경유하여 데이터베이스 서버에서 데이터 셋을 가져와 과거 재배 사례 등을 조회 및 이용 가능하였다. 이는 전문가에게 접근을 허용함으로써 재배에 관한 지원이 가능하도록 하였다. 데이터 베이스 시스템으로 연계하여 온실환경 정보를 분석하는 것이 가능하였다. 3. 기대효과 및 나아가야 할 방향 -개발된 시스템을 식물 공장 내 작물의 재배환경을 데이터베이스화하여 재배사례 데이터베이스를 형성하고 작물이 가장 잘 자라는 최적 재배 환경을 연구하여 고품질의 작물 재배에 이용될 수 있다. 또한 식물공장의 운전실적, 환경 조건, 환경 조절비용 등의 분석에 효율적으로 이용될 수 있을 것으로 예상되며 각 환경인자들과의 관계를 구명하는데 도움을 줄 것이다. 축적된 작물의 재배 사례 데이터베이스를 이용하여 작물 특성 및 재배 연구에 도움을 줄 수 있을 것이다. 제어 장치들의 운영실적을 분석함으로써 제어 시스템의 효율적이고 경제적인 제어가 가능하도록 할 수 있을 것이다. 이들이 모두 완성되면 전문가 및 전문가 시스템으로부터 지원을 받는 지능형 식물공장이 가능할 것이다. 본 연구에서 개발한 계측 모듈 및 데이터베이스 시스템은 실제 농가에 설치된 전용선을 이용하여 실증 실험을 통해 수정·보완하여야 할 것이다. 또한 시설원예분야에서 있어서 통신체계에 대한 표준화 연구가 수행되어 앞으로 개발될 다른 시스템들과의 호환성을 갖도록 해야 할 것이다. 앞으로 온실의 경영 및 관리 데이터베이스를 개발하여 첨단온실의 통합 관리 및 정보 시스템을 구축하여야 할 것이다. 또한, 시설원예의 환경 설계의 기준을 적용할 수 있도록 하여야 할 것이다.

• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.29-33
• /
• 2019

Carbon nanotubes, nanofibers and powders were used for acetylene adsorption experiments. A total of 15 different experiments were designed by 3-level of Box-Behnken Design (BBD) with 3 factors including the Pd concentration of 0 to 5%, adsorption temperature of 30 to $80^{\circ}C$ and $C_2H_2/CO_2$ of 3 to 10. Based on those data, a second order polynomial regression analysis was used to derive the adsorption amount prediction equation according to operating conditions. The adsorption temperature showed the greatest influence index while the $C_2H_2/CO_2$ ratio showed the smallest according to the F-value measurement of the ANOVA analysis. However, there was little interaction between major factors. In the adsorption optimization analysis, a 22.0 mmol/g was adsorbed under the conditions of Pd concentration of 3.0%, adsorption temperature of $47^{\circ}C$ and $C_2H_2/CO_2$ of 10 with 95.9% accuracy.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.391-399
• /
• 2018

In this study, Diazinon which is the most widely used organophosphorus pesticides (OPPs) among pesticides was removed by ozone/hydrogen peroxide advanced oxidation process (Peroxone AOP). Diazinon is mainly found in groundwater, drinking water, rivers and ponds that are near agricultural areas using the pesticide. Accumulation of Diazinon on the body in the form of metabolites causes neurotoxicity, confusion, dizziness and vomiting. Diazinon is not easily removed by conventional water treatment processes. This study investigated the Diazinon removal characteristics with OH radicals with strong oxidizing power generated by using ozone and hydrogen peroxide. We determined optimal hydrogen peroxide/ozone injection molar ratio and confirmed the elimination reaction to initial Diazinon concentration, pH and DOC concentration, which are factors influencing the removal efficiency. Domestic researches on pesticide removal in the environment are much less than the cases of overseas. This study is expected to provide a basis for the process design for pesticide removal.

• Elastomers and Composites
• /
• v.41 no.3
• /
• pp.194-204
• /
• 2006

The effects of the particle size and the structure of carbon blacks on the friction and the wear behavior of filled natural rubber were investigated in this study. The particle size and the structure of carbon black had a significant effect on the wear rates and the worn surface pattern, and the effect of them on abrasion resistance should be considered for the optimum design of desired wear properties. Ten carbon blacks with various sizes and structures are mixed with natural rubber in order to investigate the effects on the wear rate ($W_R$). The friction and the wear behavior were examined by self-made blade type friction-wear abrader, and the ,elation with characteristic parameter (${\psi}=\sqrt{{N_2^2}+{DBP^2}}$), obtained from the particle size and the structure, was studied. The wear rate ($W_R$) had a Power Law relation with the frictional work ($W_f$) and it was inversely proportional to the characteristic parameter of carbon black. It means that smaller particle size and better structure development of carbon black resulted in improved abrasion resistance.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.159-167
• /
• 2000

In recent years, combined and separated sewer overflows (CSOs, SSOs) have been recognized as a significant pollution problem. To solve this problem a series of experiments were performed in a small scale Rapid Floc Settler (RFS) device to determine its ability in removing micro particles and dissolved materials from polluted waters. The RFS device is a compact physico-chemical wasterwater treatment system. Polyacrylamide (PAM) is used as a coagulant for treating stormwater in the RFS. The results of Jar test showed that PAM could be an excellent coagulant as compared with aluminum sulfate. and ferric chloride. In several experimental conditions, the influence of different variation parameters was tested to measure the efficiency of the RFS. Tests have been carried out with typical CSOs concentrations (50~1.000mg SS/L). The treatment efficiency with regard to SS and COD, which can be obtained at an overflow rate of $130m^3/m^2/day$, are 90% and 80%, respectively. Comparing other sedimentation technologies with RFS, the overflows rate of RFS is ten times faster. The distribution of particle size and number were analyzed. The RFS is suitable for the treatment of CSOs and also the removal of settleable and dissolved materials in urban stormwater runoff.

• Journal of radiological science and technology
• /
• v.40 no.4
• /
• pp.533-542
• /
• 2017

In diagnostic radiology, the imaging system has been changed from film/screen to digital system. However, the method for removing scatter radiation such as anti-scatter grid has not kept pace with this change. Therefore, authors have devised the indirect flat panel detector (FPD) system with net-like lead in substrate layer which can remove the scattered radiation. In clinical context, there are many radiographic examinations with angulated incident X-ray. However, our proposed FPD has net-like lead foil so the vertical lead foil to the angulate incident X-ray would have bad effect on its performance. In this study, we identified the effect of vertical/horizontal lead foil component on the novel system's performance and improved the structure of novel system for clinical usage with angulated incident X-ray. Grid exposure factor and image contrast were calculated to investigate various structure of novel system using Monte Carlo simulation software when the incident X-ray was tilted ($0^{\circ}$, $15^{\circ}$, and $30^{\circ}$ from the detector plane). More photons were needed to obtain same image quality in the novel system with vertical lead foil only then the system with horizontal lead foil only. An optimal structure of novel system having different heights of its vertical and horizontal lead foil component showed improved performance compared with the novel system in a previous study. Therefore, the novel system will be useful in a clinical context with the angulated incident X-ray if the height and direction of lead foil in the substrate layer are optimized as the condition of conventional radiography.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.711-719
• /
• 2017

Bladeless fan is becoming increasingly popular owing to its advantages, such as improved safety, easy to clean, and attractive shape. However, many people are reluctant to purchase it because of several disadvantages, such as noise and moderate wind; therefore, research on how improve wind generation without increasing the motor speed is required. This study investigates the optimization of the shape of the nozzle and nearby surface using CFD (Computational Fluid Dynamics) simulation, ANSYS fluent. The results are analyzed by ANOM (analysis of mean) and interaction analysis; therefore this study suggests the variables of affecting Coanda effect and satisfy the govern equation, the conservation of momentum. The optimal combination was found through a predictive equation. In this study, factors and levels that affect the mass flow rate were selected and experimental points were arranged using the orthogonal array table. The value of the mass flow rate was confirmed by ANSYS fluent, which is a CFD program. Through the ANOM, it was confirmed that the nozzle distance is the most influential parameter affecting the mass flow rate. Furthermore, the mass flow rate obtained from the predictive equation and the mass flow rate from the CFD correspond to the largest values. Results from this study confirmed that the mass flow rate is increased by a change in the shape, even if the motor speed did not increase.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.147-152
• /
• 2020

In this study, we dedicated to optimize the process for a reactive diluent for epoxy resin of improved chemical resistance by using cardanol, a component of natural oil of cashew nut shell liquid (CNSL). The central composite design (CCD) model of response surface methodology (RSM) was used for the optimization. The quantitative factors for CCD-RSM were the cardanol/ECH mole ratio, reaction time, and reaction temperature. The yield, epoxy equivalent, and viscosity were selected as response values. Basic experiments were performed to design the reaction surface analysis. The ranges of quantitative factors were determined as 2~4, 4~8 h, and 100~140 ℃ for the cardanol/ECH reaction mole ratio, reaction time, and reaction temperature, respectively. From the result of CCD-RSM, the optimum conditions were determined as 3.33, 6.18 h, and 120 ℃ for the cardanol/ECH reaction mole ratio, reaction time, and reaction temperature, respectively. At these conditions, the yield, epoxy equivalence, and viscosity were estimated as 100%, 429.89 g/eq., and 41.65 cP, respectively. In addition, the experimental results show that the error rate was less than 0.3%, demonstrating the validity of optimization.