• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.207-208
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.449-450
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.791-792
• /
• 2010

• Journal of the Korea Safety Management & Science
• /
• v.2 no.2
• /
• pp.167-176
• /
• 2000

A study to analyze and solve problems of plastic injection molding experiment has presented in this paper. We have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/N ratio.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.503-509
• /
• 2018

In this study, we used the ultrasonic extraction process as a method to extract antioxidant substances from kudzu, and measured the content of iso-flavonoids puerarin, daidzein, daidzin contained in kudzu. The response surface methodology which is a statistical analysis method for optimizing the extraction amount of iso-flavonoids from the kudzu and the process condition for maximizing the yield was applied. It is the final objective of this study to effectively derive the condition of the process that matches the target response with a minimum number of experiments and analyze the effect of each process condition on the response. In the response surface methodology, the central composite design was applied and the optimum condition was analyzed, and the three independent variables were set to ultrasonic irradiation time, volume ratio of ethanol/ultrapure water, ultrasonic irradiation power. Using the response surface methodology, the optimum conditions with the maximum extraction yield and the content of iso-flavonoids were evaluated as ultrasonic irradiation time (24.75 min), ethanol / ultrapure water volume ratio (39.75 vol%), ultrasonic irradiation power (592.36 W). The overall satisfaction level appears as high as 0.8938, which is recognized at a significance level within 5%. As a result of analyzing the optimization process, it was confirmed that the ultrasonic irradiation time is the factor that most affects the responses.

• Resources Recycling
• /
• v.23 no.5
• /
• pp.28-35
• /
• 2014

The basic properties of cow and chicken manure such as proximate analysis and element analysis were estimated and the comparison to energy characteristics of carbonization residue between cow and chicken manure was evaluated. The optimum carbonization condition of cow and chicken manure was decided by total heating value of carbonization residue which was expressed by multiplying low heating value by yield. The optimum carbonization conditions for carbonization time and temperature can be decided by 15 min, and $350^{\circ}C$ for chicken manure, and 20 min, and $300^{\circ}C$ for cow manure. At the optimum carbonization conditions, low heating values for the carbonization residue of cow and chicken manure are evaluated by 4,378kcal/kg, and 3,462kcal/kg, respectively. The residues of cow manure were satisfied with the standard of solid fuel product. However, the residue of chicken should be improved by materials changes to be used as a renewable energy source.

• Clean Technology
• /
• v.18 no.2
• /
• pp.183-190
• /
• 2012

Electrochemical regeneration of the iron chloride waste solution from PCB etching reduces environmental contamination and produces copper as by-product, so the economic feasibility is high. But iron chloride waste solution contains iron and copper and the reactions occurring in the electrolytic cell are complicated. In this work, the oxidation of iron chloride and copper deposition were examined through batch electrolysis and the optimum conditions of the process parameters were found. The oxidation of ferrous chloride was achieved easily to the desired level. The copper deposition efficiency was high in the reaction using the carbon cathode when the copper density was 12 g/L with the electric current density of $350mA/cm^2$, and the ratio of the $Fe^{2+}$ ion was high. In addition, the possibility of the scale-up was confirmed in continuous operation of bench reactor using the optimum conditions obtained.

• Food Science and Preservation
• /
• v.10 no.3
• /
• pp.320-325
• /
• 2003

This study was conducted to optimize sugaring process of yam for development of new snack product and enhancement acceptability. Three variables by five level central composite design and response surface methodology were used to determine optimum conditions for sugaring time, temperature and concentration. Optimization of the process was conducted using the combination of the moisture content, solid content, color and rehydration ratio. The regression polynomial model was suitable (P>0.05) model by Lack-of-Fit analysis with highly significant. To optimize the process, based on surface response and contour plots, superimposing the individual contour plots for the response variables. The optimum conditions for this process were 5.5 hours and 58％ at 40$^{\circ}C$ under the optimum of restricted variables as moisture content was 66 to 70, solid content was 25 to 30％, L value was above 75, a value was -2.1 to -2.4, b value was above 5 and rehydration ratio was 200 to 250.

• Journal of Korea Foundry Society
• /
• v.28 no.1
• /
• pp.41-44
• /
• 2008

레오다이캐스팅 공정은 용탕상태의 원소재로부터 최종형상에 가장 가까운 정형제품(near-net shape)을 원하는 기계적 성질과 동시에 경제적으로 생산할 수 있는 제조방법으로 개발되어 왔다. 본 논문에서는 전자교반 시스템을 이용하여 결정립이 제어된 반용융 상태의 소재를 수직형 다이캐스팅기를 사용하여 리어파트(rear parts) 자동차 부품을 성형실험 하였다. 성형된 시제품들은 성형조건에 따른 조직 및 인장강도를 관찰하였으며, 시효경화 시간에 따른 T6 최적 열처리 조건을 조사하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.4
• /
• pp.265-270
• /
• 2014

Protease producing microorganisms were isolated from many kinds of food waste and fermented foods, which contains high amount and variable kinds of degraded substances. Several microorganisms were identified by 16S rRNA full sequencing analysis methods. The activity of protease was analyzed and identified in variable conditions for the application. For industrial use for biowaste treatment some proteases were isolated, identified and selected from microbial cells. And the tests were carried for the further use. The protein degrading activity at low temperature is useful for the treatment of organic waste, which contains much proteins. By the protein degradation process the organic waste can be utilized in variable fields, for example from feedstuff supplement to fertilizer for agriculture. Bacterial cells with protease activity at low temperature were isolated and identified. The optimal conditions for microbial cultivation and protease production were studied.