• Korean Journal of Ecology and Environment
• /
• v.44 no.2
• /
• pp.172-177
• /
• 2011

The study sought to determine the efficient management of Korean aucha perch by estimating the potential yield (PY), which means the maximum sustainable yield (MSY) based on the optimal stock, in the mid-upper region of the Seomjin River watershed from August 2008 to April 2009. The stock assessment was conducted by the swept area method and PY was estimated by a modified fisheries management system based on the allowable biological catch. Also, the yield-per-recruit analysis (Beverton and Holt, 1957) was used to review the efficient management of resource, Coreoperca herzi. The age at first capture ($t_c$) was 1.464 age and converted body length was 7.8 cm. Concerning current fishing intensities, the instantaneous coefficient of fishing mortality (F) was estimated to be 0.061 $year^{-1}$; yield-per-recruit analysis estimated the current yield per recruit as 4.124 g with F and $t_c$. The fishing mortality of Allowable Biological Catch ($F_{ABC}$) based on the current $t_c$ and F was estimated to be 0.401 $year^{-1}$, therefore, the optimum fishing intensities could be achieved at the higher fishing intensity for Coreoperca herzi. The calculated annual stock of Coreoperca herzi was 3,048 kg, the potential yield was estimated to be 861 kg with $t_c$ and $F_{ABC}$ at the fixed current level. Using yield-per-recruit analysis, if F and $t_c$ were set at 0.643 $year^{-1}$ and 3 age, respectively, the yield per recruit would be predicted to increase 3.4-fold, from 4.12 g to 13.84 g.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.33-46
• /
• 2010

We investigated and estimated at the characteristics of decomposition and by-products of N-Nitrosodimethylamine (NDMA) using a design of experiment (DOE) based on the Box-Behken design in an UV process, and also the main factors (variables) with UV intensity($X_2$) (range: $1.5{\sim}4.5\;mW/cm^2$), NDMA concentration ($X_2$) (range: 100~300 uM) and pH ($X_2$) (rang: 3~9) which consisted of 3 levels in each factor and 4 responses ($Y_1$ (% of NDMA removal), $Y_2$ (dimethylamine (DMA) reformation (uM)), $Y_3$ (dimethylformamide (DMF) reformation (uM), $Y_4$ ($NO_2$-N reformation (uM)) were set up to estimate the prediction model and the optimization conditions. The results of prediction model and optimization point using the canonical analysis in order to obtain the optimal operation conditions were $Y_1$ [% of NDMA removal] = $117+21X_1-0.3X_2-17.2X_3+{2.43X_1}^2+{0.001X_2}^2+{3.2X_3}^2-0.08X_1X_2-1.6X_1X_3-0.05X_2X_3$ ($R^2$= 96%, Adjusted $R^2$ = 88%) and 99.3% ($X_1:\;4.5\;mW/cm^2$, $X_2:\;190\;uM$, $X_3:\;3.2$), $Y_2$ [DMA conc] = $-101+18.5X_1+0.4X_2+21X_3-{3.3X_1}^2-{0.01X_2}^2-{1.5X_3}^2-0.01X_1X_2+0.07X_1X_3-0.01X_2X_3$ ($R^2$= 99.4%, 수정 $R^2$ = 95.7%) and 35.2 uM ($X_1$: 3 $mW/cm^2$, $X_2$: 220 uM, $X_3$: 6.3), $Y_3$ [DMF conc] = $-6.2+0.2X_1+0.02X_2+2X_3-0.26X_1^2-0.01X_2^2-0.2X_3^2-0.004X_1X_2+0.1X_1X_3-0.02X_2X_3$ ($R^2$= 98%, Adjusted $R^2$ = 94.4%) and 3.7 uM ($X_1:\;4.5\;$mW/cm^2$, $X_2:\;290\;uM$, $X_3:\;6.2$) and $Y_4$ [$NO_2$-N conc] = $-25+12.2X_1+0.15X_2+7.8X_3+{1.1X_1}^2+{0.001X_2}^2-{0.34X_3}^2+0.01X_1X_2+0.08X_1X_3-3.4X_2X_3$ ($R^2$= 98.5%, Adjusted $R^2$ = 95.7%) and 74.5 uM ($X_1:\;4.5\;mW/cm^2$, $X_2:\;220\;uM$, $X_3:\;3.1$). This study has demonstrated that the response surface methodology and the Box-Behnken statistical experiment design can provide statistically reliable results for decomposition and by-products of NDMA by the UV photolysis and also for determination of optimum conditions. Predictions obtained from the response functions were in good agreement with the experimental results indicating the reliability of the methodology used.

• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.82-90
• /
• 1999

Electrorheological(ER) fluid is a material that shows the dramatic change of rheological properties under an electric field and responds reversibly in a few milliseconds. ER fluid's response to an electric field along with its fast switching capability allows ER devices to be precisely controlled. The real application with ER fluid, however, has many limitations to be overcome; temperature fluctuation, moisture, dust, aggregation, precipitation, and low yield stress, for example. The magnitude and the characteristics of yield stress of ER fluid plays an important role in practical applications. In this research, a dynamic simulation on the squeezing flow of the ER fluid was carried out. Numerical simulation on isolated chains was performed to find out the effect of hydrodynamic and electrostatic force depending on the chain location, the squeezing rate, and the chain structure. Suspension model that is composed of a large number of particles was also investigated. The increase of normal stresses as well as the existence of a yield stress at an earlier stage could be observed, and the effective control of the normal stresses could be achieved at an optimal condition of the hydrodynamic force and the electrostatic force.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.200-207
• /
• 2009

This paper presents a compact, low insertion loss, sharp rejection and wide band microstrip band pass filter that is composed rectangular loop resonator and Step-Impedance-Open-Stub(SIOS). The SIOS can be reduce length about 30 % more than general 0.25 $\lambda$ open stub. And the stub can the advantage of tuning impedance magnitude. In order to demonstrate agrement of this paper prove, the optimized wide band pass filters are realized and experimented. A transmission line model used to calculate the frequency response of the new filters shows good agreement with measurements. The filter has 3 dB fractional bandwidth of 51.75 %(3.206 GHz), an insertion loss of better than 0.44 dB from 4.587 GHz to 7.793 GHz, and two rejection of greater than 30 dB within 221 MHz($4.326{\sim}4.587\;GHz$) at low frequency band, 181 MHz($7.739{\sim}7.954\;GHz$) at high frequency band. Maximum rejection characteristics of the filter are -61.8 dB at low frequency and -76.3 dB at high frequency.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2000.05a
• /
• pp.101-106
• /
• 2000

자동화 기기 분야에서 컴퓨터의 적용 및 응용은 하드웨어 발달에 따라 매우 빠르고 민감하게 반영되어왔다. 이는 컴퓨터 하드웨어의 빠른 개발 주기에 맞춰 저 가격, 고 효율성, 높은 신뢰성, 호환성 등의 장점을 가진 PC가 현대의 컴퓨터 흐름을 주도하게 되면서 자동화 산업분야 또한 이를 적용하여 왔기 때문이다. 이에 따라, 자동화 기기 분야에서는 고 가격, 긴 개발기간 등을 필요로 했던 과거와 달리 저 가격, 짧은 개발기간, 다양한 개발환경 등을 이룰 수 있었다. 또한, 생산량 증가에만 의존하던 과거와 달리 현대에 이르러서는 시스템의 최적화, 효율의 극대화, 시스템의 안정성, 운용의 편리성, 호환성 등의 개념들이 도입되고 있는 것이다. 자동화 기기를 구성하는 요인으로는 크게 시스템의 틀을 이루는 기계부분과 이를 제어하는 제어 시스템부로 나뉠 수 있다. 제어 시스템에서는 기계부분의 동작을 제어하는 동작 제어부와 이에 관한 정보를 화면에 나타내는 GUI(Graphical User Interface)부분으로 나뉘게된다. 현재에는 이를 통합하여 하나의 하드웨어에서 제어부와 GUI를 모두 담당하는 방법이 연구 진행되고 있으나, 하드웨어를 둘로 나누거나 하나로 하여도 제어부와 GUI 사이의 통신부분은 빼놓을 수 없는 요소가 된다. 따라서, 본 논문에서는 시스템의 안정성을 위하여 두 시스템간에 송·수신되는 데이터를 추적할 수 있도록 하는 Emulate 기법을 구현 및 개발하고자 한다. 이는, 두 시스템간의 통신 데이터를 실시간으로 누적, 저장하여 사용자로 하여금 시스템의 운용상태를 분석할 수 있게 하였으며, 시스템 오류발생 시 Emulate 자료를 근거로 시스템의 운용상태를 파악할 수 있게 하였다.근 제한기능을 제공하며 각 클라이언트와 서버간의 실시간 연결 혹은 지연연결을 지원하는 독립적인 애플리케이션이다. 이러한 처방전달 메시징시스템을 구성하는 각 요소에 대해 정의하고 개념적 모델을 설계하고자 한다.에게 청구되며, 소비자에게 전송 되는 청구서는 사용자DB를 참조하여 사용자가 미리 정의한 원하는 형태로 변환되어 전달되며, 필요시 암호화 과정을 거치는 것이 가능해야 한다. 전송된 청구서는 전자우편의 경우, 암호해독이 가능한 전용 브라우저를 통해 열람 되며, 이는 다시 전용 브라우저를 통해 지불인증이 승인되어 청구 제시서버에게 전송된다. EBPP 시스템의 제어 흐름은 크게 기업이 청구 정보를 소비자에게 제시하는 흐름과 소비자의 지불 승인으로 인해 기업이 은행에 지불을 요구하는 흐름으로 구분할 수 있다. 본 논문에서는 통합 청구서버 및 정구 제시서버의 역할 및 구성 요소들에 대해 서술하고, EBPP 시스템과 연동하여야 하는 메일 서버와의 상호 작용에 대해 서술할 것이다. 본 시스템을 아직 구현이 되지 않은 관계로 시스템의 성능 등의 수치적 결과를 제시할 수 없는 상태다., 취약계층을 위한 일차의료, 의약관리), ${\circled}2$ 보건소 조직 개편 및 민간의료기관과 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(關係)있음을 시사(示唆)해 주고 있다.ble nutrient (TDN) was highest in booting stage (59.7%); however no significant difference was foun

• Journal of Korean Society of Steel Construction
• /
• v.17 no.2 s.75
• /
• pp.115-130
• /
• 2005

This paper presents the effects of indirect costs on Life-Cycle-Cost(LCC) effective optimum design of steel-box girder bridges. The LCC formulations considered in the LCC optimization of the bridges consist of initial cost and expected rehabilitation costs including repair/replacement costs, loss of contents or fatality and injury losses, and indirect costs such as road user costs and indirect socio-economic losses. To demonstrate the LCC-effectiveness for optimum design of the bridges, an actual steel box girder bridge having two continuous spans(2@50m=100m) is considered as a numerical example. And also, in this paper, various sensitivity analyses are performed to investigate the effects of indirect costs caused by traffic conditions such as number of detour route, number of lane on detour route, length of detour route, and traffic volumes on the LCC-effective optimum design. From the numerical investigations, it may be concluded that indirect costs caused by traffic network may sensitively influence on the LCC-effective optimum design of steel-box girder bridges. Therefore, it may be stated that the traffic conditions should be considered as one of the important items in the LCC-effective optimum design of the bridges.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.1
• /
• pp.69-76
• /
• 2003

This paper described the ultimate strength and deformation limit of new uniplanar T-joints in cold-formed square hollow sections. The new T-joint had the configuration that only a branch member was oriented at 45 degrees to a chord member in the plane of the truss. This study focused on the branch-rotated T-joints governed by chord web failure. Based on the test results of the T-joint in cold-formed square hollow sections, the deformation lirnit was found to be 3%B for $16.7{\leq}2(B/T){\leq}33.3$ and $0.63{\leq}(b_1/B)=0.7$. Existing strength formulas for traditional T-joint were investigated, and the new strength formula for the branch-rotated T-joint was proposed. This proposed formula was based on column buckling theory considering the rounded corners of cold-formed square hollow sections. Finally, the optimization condition of yield stress and $2{\gamma}$ was recommended to select the optimized chord section.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.23-30
• /
• 2017

Most superconducting magnets which generate more than 20 T consist of nested magnets. A combination of LTS and HTS magnets is conventionally used, but high field magnets which use only HTS magnets have been developed recently. As HTS wires have very strong magnetic anisotropy, appropriate techniques should be used to consider this effect properly. The load line method has been conventionally used to design nested magnets for high field generation. Because this method considers only parallel and perpendicular magnetic fields, the effect of their orientation is not taken into account. In this paper, the actual orientation of the magnetic fields from 0 to 90 degrees is considered. The critical currents of the two kinds of high field nested magnets designed using the proposed method are calculated. The finite element method is used to calculate the distribution of the magnetic fields and the evolution strategy is used to find the critical current which maximizes the central magnetic field.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.95-104
• /
• 2018

The structures and energies of the anhydrate and hydrate (hydrate rate: h of 1) states of L-alanine (LA) and glycine (G) were calculated by quantum chemical calculations (QCCs) using B3LYP/6-31G(d,p) for four types of conformers (${\beta}$-extended: ${\Phi}/{\Psi}=t-/t+$, $PP_{II}$: g-/t+, $PP_{II}$-like: g-/g+, and ${\alpha}$-helix: g-/g-). In LA and G, which have an imino proton (NH), three conformation types of ${\beta}$-extended, $PP_{II}$-like, and ${\alpha}$-helix were obtained, and water molecules were inserted mainly between the intra-molecular hydrogen bond of $CO{\cdots}HN$ in $PP_{II}$-like and ${\alpha}$-helix, and attached to the CO group in ${\beta}$-extended. In LA and G, $PP_{II}$-like conformers were most stable in the anhydrate and hydrate states, and the result for LA was different from some experimental and theoretical results from other studies reporting that the main stable conformation of alanine oligopeptide was $PP_{II}$. The formation pattern and stability of the conformation of the oligopeptide was strongly dominated by the presence/absence of intra-molecular hydrogen bonding of $CO{\cdots}HN$, or the presence/absence of an $NH_2$ group in the starting amino acid.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.393-399
• /
• 2017

In a reciprocating compressor, the piston and connecting rod are important parts. Excess mechanical stress on these parts may cause damage, and broken parts are expensive and difficult to replace. Therefore, it is necessary to analyze the mechanical stress affecting durability and longevity. The main purpose of this study was to identify locations of maximum stress on pistons and connecting rods. Based on dynamic calculation of the working process of a specific air compressor, an analysis of piston and connecting rod performance has been completed. A three-dimensional model for the air compressor's pistons and connecting rods was built separately, and FEM analysis of these components was carried out using a numerical method. The pistons were loaded by pressure which was changed according to crankshaft angle without thermal boundary conditions. The simulation results were used to predict and estimate stress concentration as well as the value of this stress on pistons and connecting rods. The maximum equivalent stress calculated are over 190 MPa on pistons and 123 MPa on connecting rods at crank angle $135^{\circ}$ and $225^{\circ}$ but these are under tensile yield strength. Besides, the calculated safety factors of connecting rods and pistons is higher than 1. Moreover, the results obtained can be used to provide manufacturers with references to optimize the design of pistons and connecting rods for reciprocating compressors.