• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.244-244
• /
• 1999

Liquid Crystal Displays(LCDs) 투명성 전도막으로 사용하는 Indium Tin Oxide (ITO)의 고밀도 식각특성을 조사하였다. 특히 ITO식각의 경우, pixel electrode 전극에서 사용되는 underlayer인 SiO2, Si3N4와의 최적의 선택비를 얻는데 중점을 두고 있다. 따라서 본 실험에서는 Inductively Coupled Plasma(ICP)를 이용하여 source power, gas combination, bias voltage, pressure 및 기판온도에 따른 ITO의 식각 특성과 이의 underlayer인 SiO2, Si3N4와의 선택비를 조사하였다. Ar과 CH4를 주된 식각가스로서 사용하였으며 첨가가스로는 O2와 HBr를 사용하였다. ITO의 식각특성을 이해하기 위하여 Quadruple Mass Spectrometry(QMS), Optical emission spectroscopy(OES) 이용하였으며, 식각된 sample의 잔류물을 조사하기 위하여 X-ray photoelectron spectroscopy(XPS)를 이용하여 분석하였다. Ar gas에 적정량의 CH4 혼합이 순수한 Ar 가스로 식각한 경우에 비하여 ITO와 SiO2, Si3N4의 선택비가 높았으며, 더 높은 식각 선택비를 얻기 위하여 Ar/CH 분위기에서 첨가가스 O2, HBr을 사용하였다. Source power 및 bias 증가에 따라 ITO의 식각률은 증가하나, underlayer와의 선택비는 감소함을 보였다. 본 실험에서 측정된 ITO의 high 식각률은 약 1500$\AA$/min이며, SiO2, Si3N4와의 high selectivity는 각각 7:1, 12:1로 나타났다. ITO의 etchrate 및 선택비는 source power, bias, pressure, CH 가스첨가에 의존하였지만 기판온도에는 큰 변화가 없음을 관찰하였다. 또한 적정량의 가스조합으로 식각된 시편의 잔류물을 줄일 수 있었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.53-60
• /
• 2002

Based on the analyses of the single transverse injection in supersonic flow fields, the mixing characteristics of dual transverse injection of hydrogen in supersonic air flow are studied with computational methods. Three-dimensional Navier -Stokes and the k-$\omega$ SST turbulence model were used. A parametric study is conducted with the variation of the distance between two injectors. The flow patterns and the mixing characteristics of two injection flows are very different from each other, and the flow patterns and the mixing characteristics of the rear injection flow are strongly influenced by those of the first injection flow. The increase of the distance between two injectors up to a specific distance results in the increase of mixing rate and penetration of fuel. However, the increase of the distance over the specific distance results in the decrease of mixing rate and penetration of fuel. From the results it can be stated that there exists a distance between two injectors for optimum mixing characteristics.

• Horticultural Science & Technology
• /
• v.31 no.5
• /
• pp.558-564
• /
• 2013

The objective of this research was to secure the fundamental information in changes of soil physical properties as influenced by the compaction of root media during container filling. Three root media were formulated by blending peatmoss (PM) with expanded rice hull (PM + ERH, 8:2, v/v), carbonized rice hull (PM + CRH, 6:4) and ground and aged pine bark (PM + GAPB, 8:2). Based on the optimum bulk density, the amount of root media filled into 6.0, 7.5, 8.5, 10.5 and 12.5 cm were adjusted to 90, 100, 110, 120, and 130%, then the changes in total porosity (TP), container capacity (CC), and air-filled porosity (AFP) were measured. The TP decreased significantly as the packing amount of three root media were elevated in all sizes of container. The TP did not show significant differences among the root media in small sizes of containers, but showed significant differences when sizes of containers became larger. As packing amount of three root media were elevated, the CCs in all sizes of containers were decreased. The PM + CRH had the lowest CC among three root media in containers smaller than 8.5 cm, but had the highest CC in those larger than 10.5 cm. These results indicated that the decreases in CC were influenced by the sizes of containers as well as kinds of root media. The elevation of packing amount in three root media diminished significantly the AFP. The AFP in PM + GAPB medium was two times as high as those of PM + ERH or PM + CRH when equal packing densities were applied in all sizes of containers. As the container sizes became larger in three root media, the extents in decreasing of CC were distinct than those of AFP. Above results indicate that elevation in packing amount of three root media decreased significantly the TP, CC and AFP, but these were influenced differently by sizes of containers and kinds of root media. The results would be useful for expectation in the changes of physical properties in various sizes of containers filled with peatmoss based root media.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1706-1716
• /
• 1991

본 연구에서는 혼합대류하는 연직원통휜 열전달에 미치는 복사효과에 Rossel- and 근사해법을 도입한 층류 경계층방정식과 휜 전도방정식을 동시에 해석하여 복사 -전도매개변수(radiation-conduction parameter) M, 대류-전도 매개변수(convectionc- onduction parameter) N$_{c}$, 부력매개변수(buoyancy force parameter) R$_{i}$ 그 리고 횡곡률 매개변수(transverse curvature parameter) .lambda.를 계산 파라미터로 하여 휜 최적설계의 기본이 되는 총열전단률, 무차원 국소등가열전달계수, 무차원 국소열플 럭스 및 휜온도분포를 계산할 수 있는 일반성있는 algorithm을 개발하고 휜 성능에 관 한 결과들을 제공함으로써, 좀 더 완전한 복사 열플럭스를 도입한, 다음 연구를 위한 범용의 기초자료를 얻는데 본 연구의 목적이 있다.

• Journal of Energy Engineering
• /
• v.3 no.1
• /
• pp.44-53
• /
• 1994

STELF 기술의 핵심의 되는 IMPEX 블록의 잔류 공급률, 겉보기 밀도, 흑연의 혼합비 등 여러 가지 주요 변수가 블록의 특성에 미치는 영향을 조사하여 실제 반응기를 설계하는데 필요한 자료를 구하였다. 대표적인 염들에 대하여 물질전달 및 열전달 문제를 일으키지 않는 영역에서 최소의 부피를 갖는 값들을 계산하였고, 각각의 물질이 갖는 특정 전도도에서의 최대 냉방 및 난방 에너지 밀도를 계산하였다. 이로부터 얻은 값들을 8시간 동안 사용할 수 있는 6kW 냉방용 반응기 설계에 적용하여 본 결과 SrCL2-8/1 NH3가 최적의 염임을 확인하였다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.04a
• /
• pp.79-83
• /
• 2010

포소화약제는 다양한 설비(이동식, 고정자동식), 대형의 유류화재 적합, 대량 연속적 생산가능 약제의 특수성 및 장기보관이 가능한 특징이 있어 이에 대한 개발 및 연구가 꾸준히 진행되고 있다. 그러나 포소화약제는 주변의 온도 및 환경에 따라 발포력의 변화가 큰 특징이 있어 실제 겨울철 소방 활동시에는 사용을 자제하고 있다. 따라서 본 연구에서는 사용온도에 따른 발포력 변화를 측정하며, 최적 발포율 도출을 위한 온도에 따른 적정 혼합율을 산정한다. 실험은 한국 소방산업기술원의 "포소화약제의 형식승인 및 검정기술기준(KOFEIS 0103)"에서 제시하고 있는 표준 발포기를 이용 측정하며, $5{\sim}30^{\circ}C$ 온도에서 혼합률에 따른 발포력 변화를 측정하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.130-134
• /
• 2010

The effects of design parameters of supersonic ejector system under the assumption of constant pressure mixing were performed. Design parameters were mass flow rate ratio, area ratio between primary and secondary flow, and primary Mach number. 1-D theoretical performance of ejector in terms of pressure ratio and contraction ratio with and without loss mechanism such as diffuser efficiency and friction were considered.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.4
• /
• pp.123-130
• /
• 2011

In the precedent study it was presented that the comparison of thermal resistivity using various backfill materials including river sand regarding water content, dry unit weight and particle size distribution. Based on the precedent study, this study focused on developing the optimized backfill material that would improve the power transfer capability and minimize the thermal runaway due to an increase of power transmission capacity of underground power cables. When raw materials, such as river sand, recycled sand, crush rock and stone powder, are used for a backfill material, they has not efficient thermal resistivity around underground power cables. Thus, laboratory tests are performed by mixing Fly-ash, slag and floc with them, and then it is found that the optimized backfill material are required proper water content and maximum density. Through various experimental test, when coarse material, crush rock, is mixed with recycled sand, stone powder, slag or floc for a dense material, the thermal resistivity of it has $50^{\circ}C$-cm/Watt at optimum moisture content, and the increase of thermal resistivity does not happen in dry condition. The result of experiments approach the optimization of the backfill materials for underground power cables.

• The Korean Journal of Malacology
• /
• v.29 no.2
• /
• pp.91-96
• /
• 2013

Although the method of seedling production of Haliotis discus hannai is well known, the optimum benthic diatom species as a live food at early larval stage are not fully developed. In this study three Pennales diatom species, Caloneis schroederi, Rhaphoneis sp., and Cocconeis californica were examined on settlement, metamorphosis, survival, and growth of Haliotis discus hannai larvae. The larvae fed Raphoneis sp. or C. californica showed high settlement rate with 80-82% within 48 hrs, which was significantly higher than those fed C. schroederi or mixed diets with three diatom species. The larvae fed the former microalgal species also showed higher metamorphosis rate with 32-34% than the latter species with 10-12% within 4 days. With regard to survival and growth of the larvae, single diet with Rhaphoneis sp. or C. californica had better dietary value than the mixed diets for the early larvae of H. discus hannai.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.303-310
• /
• 2002

An optimization for fermentation processes to make lactic acid juice with extracts from apples, carrots, celery, watercress, jujube and lycii (3 : 3 : 1 : 1/2 : 1 : 1/2) using co-cultures of Leuconostoc mesenteroides, Lactococcus lactis and Lactobacillus cellobiosus isolated from Dongchimi had been investigated on the emphasis of composition of sugars and sodium chloride at various temperatures. The concentration of sugars less than 25% and salt less than 0.8% did not affect remarkably the cell growth of lactic acid bacteria and acid formation during fermentation. The fermenting juice showed increases in the population of lactic acid bacteria and acidity, and decreases in population of coliform bacteria and sugar concentration with high cultural temperature. At $25^{\circ}C$ viscous substance was not formed as it had at $15^{\circ}C$. The optimum composition, based on the sensory evaluation, was determined to be oligosaccharide and 0.2% for sodium chloride. It took 3 days to produce the most preferable juice of pH 3.62 at $25^{\circ}C$. At the optimal state the fermented juice showed viable cell counts (cfu/mL) of exponential numbers 8 for lactic acid bacteria and 4 for yeast. Coliform bacteria which had been $5.6{\times}10^2\;cfu/mL$ at the beginning of fermentation were not detected.