• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.712-712
• /
• 2014

본 논문에서는 지연-가중-합 빔형성 방법이 적용된 지향성 헤드폰의 마이크로폰 배치 설계를 설명한다. 마이크로폰의 갯수, 마이크로폰 간의 간격 등이 헤드폰 지향성에 영향을 미치는 설계 변수가 된다. 본 논문에서는 현실성을 고려하여 4개 이하의 마이크로폰을 포함한 10cm 길이의 배열을 타겟으로 한다. 전방으로부터의 소리를 증폭하고 후방으로부터의 소리를 감쇠하여, 전-후방 음압차를 최대화하는 것을 목표로 하였다. 구형 머리전달 함수를 이용한 시뮬레이션을 통해 최적의 마이크로폰 배치를 결정하였다. 설계된 헤드폰은 3개의 마이크로폰을 이용하여 300~3000Hz의 주파수 대역에서 평균 34.6dB의 전-후방 음압차를 보였다. 이 결과는 선행 연구에서 수행된 지연-합 빔형성 방법을 이용한 결과에 비해 8.8dB 뛰어난 성능이다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.2
• /
• pp.147-154
• /
• 1989

An effective placement of macro blocks having arbitrary width and height is very important in reducing the chip area and the signal delay. In this paper, we proposed a method of macro block placement to obtain the globally optimal placement using simulated annealing, and an efficient algorithm for eliminating the overlaps between the rectangular macro blocks which may remain even after the simulated annealing process is terminated. Each macro block was enlarged to take into account minimal routing area, and these macro blocks were compacted as much as possible during the placement. This procedure was implemented in C language running on MV10000/UNIX computer system, and good placements were obtained by applying this procedure to two circuits which were consisted of 50 and 160 macro blocks respectively. Several parameters giving great effects to final placements were investigated.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.105-109
• /
• 2012

In this paper, we developed an adoptable deployment method to the transmitting antennas of a ground based GPS system for aircraft. Aircraft generally uses satellite providing GPS signals for accurate position information, but transfers to ground based GPS signals time to time due to jamming signals or bad weather. The position accuracy of the ground based GPS system is highly dependent on the number and position of the GPS transmitting antennas. In this research, we found an algorism to predict the DOP due to the location of the GPS transmitting antennas and had an accurate DOP 2.5 area into 3-dimension from 0 to 10 km by 12 transmitting antennas.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.32 no.12
• /
• pp.31-37
• /
• 2003

냉각탑의 성능저하방지와 에너지절감 및 민원 발생방지를 위한 형식, 용량, 배치, 설치의 최적 선정 방안을 제시한다.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.1
• /
• pp.40-46
• /
• 2004

The equivalent source method (ESM) uses two groups of equivalent source positions. One group includes the first order images of the sound source inside the enclosure. The positions of the other group are usually on a spherical surface some distance outside the enclosure. A proper selection of the positions for the far field sources could greatly improve the performance of the modeling accuracy and reduce the number of the sources to achieve the required accuracy. This study uses optimally distributed far field source positions on the surface of enlarged version of the rectangular enclosure instead of using typical spherical distribution. Simulations using various sizes of the box shaped distribution are executed and optimal positions are searched using an optimization technique from the larger number of candidate positions. The results of using these far field source positions are compared and analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.430-435
• /
• 2007

In this paper, we propose an intelligent deployment of sensor network for reliable communication. The proposed method determines optimal transmission range based on the wireless channel characteristics, and searches the optimal number of sensor nodes, and optimal locations with SOFM. We calculate PRR against a distance uses the log-normal path loss model, and decide the communication range of sensor node from PRR. In order to verify the effectiveness of the proposed method, we performed simulations on the searching for intelligent deployment and checking for link condition of sensor network.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.294-302
• /
• 2020

In a genetic algorithm, computer simulations are performed based on the natural evolution process of life, such as selection, crossover, and mutation. The genetic algorithm searches the approximate optimal solution by the parallel arrangement of Schema, which has a short definition length, low order, and high adaptability. This study examined the possibility of improving the efficiency of the optimal solution by considering the characteristics of the building block hypothesis, which are one of the key operating principles of a genetic algorithm. This study evaluated the efficiency of the optimization results according to the gene sequence for the implementation in solving problems. The optimal design problem of the water pipe was selected, and the genetic arrangement order reflected the engineering specificity by dividing into the existing, the network topology-based, and the flowrate-based arrangement. The optimization results with a flowrate-based arrangement were, on average, approximately 2-3% better than the other batches. This means that to increase the efficiency of the actual engineering optimization problem, a methodology that utilizes clear prior knowledge (such as hydraulic properties) to prevent such excellent solution characteristics from disappearing is essential. The proposed method will be considered as a tool to improve the efficiency of large-scale water supply network optimization in the future.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.2
• /
• pp.152-163
• /
• 2022

In this paper, we present a method to enable an unmanned aerial vehicle to drop the sonobuoy, an essential element of anti-submarine warfare, in an optimal deployment. To this end, an environment simulating the distribution of sound detection performance was configured through the Unity game engine, and the environment directly configured using Unity ML-Agents and the reinforcement learning algorithm written in Python from the outside communicated with each other and learned. In particular, reinforcement learning is introduced to prevent the accumulation of wrong actions and affect learning, and to secure the maximum detection area for the sonobuoy while the vehicle flies to the target point in the shortest time. The optimal placement of the sonobuoy was achieved by applying the Deep Deterministic Policy Gradient (DDPG) algorithm. As a result of the learning, the agent flew through the sea area and passed only the points to achieve the optimal placement among the 70 target candidates. This means that an autonomous aerial vehicle that deploys a sonobuoy in the shortest time and maximum detection area, which is the requirement for optimal placement, has been implemented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.928-933
• /
• 2008

본 연구에서는 최적 빔포머 (optimal beamformer)를 이용하여, 높은 지향특성을 갖는 라우드스피커 어레이를 구성하였다. 센서 어레이 시스템에 널리 적용되는 빔포밍 방법은 상반성 (reciprocity)의 원리에 의하여 라우드스피커 시스템에도 적용이 가능하다. 음원의 개수 및 배치 간격과 같은 최적 빔포머의 설계 변수와 지향성과의 관계를 살펴보고, 잡음 증폭을 억제하기 위해 적용되는 안정화 계수 (stability factor)도 유용한 설계 변수로 활용하였다. 또한 라우드스피커 자체가 갖는 지향성과 반사와 산란 등을 고려하여 빔포머를 최적화하는 방법을 제안하였고, 이 방법을 통해 예측치와 실제 시스템과의 차이를 줄였다. 실행 예제로 실제 어레이 시스템을 구성하고, 모의 실험과 실제 측정을 수행하여 성능을 확인하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.5 no.2
• /
• pp.37-46
• /
• 1987

The single photo method has a lot of applications in forestry, traffic accident managements, industry, criminal investigation, and in daily life. In this study a new single photo method was developed by classifying into the Space resection method and the 2 Dimensional Perspective Transformation method. Metric and nonmetric cameras were used to analyse the accuracy by means of single photo method, and the errors in coordinates and lengths were studied by changing the number and arrangement of control points to obtain the optimum condition for the single photo method. The influence of number and arrangement of control points on the accuracy was relatively small in case of the Metric WILD P31 and ASAHI PENTAX 6$\times$7 cameras, where as for errors it was a major factor in the Non-metric Nikon FM2. To overcome these defects, at least 6 control points should be used for the errors to be convergent and they should be distributed evenly over the surveying area. It was found that accuracy increased as the object to be photographed was placed in the perpendicular direction to the axis of camera.