• Korean Journal of Agricultural Science
• /
• v.10 no.1
• /
• pp.84-89
• /
• 1983

This study was attempted to find out the most effective period and dosage for IBP granules application to control rice blast, especially neck blast. The results obtained from the study are as follows; The most effective application period was about 15-20 days before heading. The most effective dosage was 4kg per 10a. The most effective control on rice blast was obtained when 4kg per 10a of IBP granules was applied about 15 to 20 days before heading. Therefore it should be emphasized that application period and dosage should be considered together, when applied by farmers. However, it may be necessary to apply chemicals at least one or two times before or after rice heading, since applications of IBP Ec. in July and IBP granules in August may not be enough to control rice blast completely.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.83-89
• /
• 2003

붐방제기는 분무관에 일정한 간격으로 노즐이 설치되어 있으며 목표물 바로 위에서 농약을 직접 살포할 수 있다. 따라서 비산의 위험성이 적고 작업폭이 넓기 때문에 포장능률도 높은 장점이 있다. 또한 방제작업에 영향을 미치는 방제속도, 살포폭, 노즐 배출량, 노즐 압력 등을 최적으로 유지할 수 있는 자동제어 시스템을 채택할 수 있어 최적량의 농약을 균일하고 유효하게 살포할 수 있다. (중략)

• International Journal of Highway Engineering
• /
• v.7 no.2 s.24
• /
• pp.45-55
• /
• 2005

It is known that the Q/C(Quality Control) in the early age of portland cement concrete(PCC) pavement gives a huge effect on long term pavement performance. Thus, many studies regarding the construction of PCC pavement have focused on how to assure construction quality at the early age stage. Curing is one of the most important factor in Q/C of PCC pavement. Membrane curing that protects the evaporation of moisture by placing an impermeable layer on the slab surface is the most common practice for curing the PCC pavement. In order to improve the membrane curing practice, the rate of curing compound should be optimized. However, the optimum rate of curing compound considering Korean weather and environmental conditions has not been specified in the pavement construction specifications. In this study, a proper application rate was recommended in terms of minimizing evaporation with several full-scale tests where various rates of curing compound have been applied. Four test sites on the expressway were enlisted during the summer of 2002 and 2003. Application rates tested were in the range of $0. The rate of evaporation, the temperature pattern of the slab and the pulse velocity of concrete surface have been monitored at each test construction. The result from this study showed that the rate of current construction was approximately $160ml/m^2$ and that approximately $400ml/m^2$ of curing application was recommended as the proper rate for minimizing the moisture evaporation.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.350-357
• /
• 2014

We studied on pesticide residue and pest control effect when using various types of sprayers on paprika cultivation. Additionally, a test was conducted to optimize chemical content per unit area in condition of optimum pest control. Two types of sprayer were tested (three times) on paprika cultivation which was divided into seven sections. Blind spots were also examined using a water sensitive paper when spraying chemical pesticide, remote controlled sprayer were confirmed to be not effective in terms of its spraying capacity. However, a U-shaped sprayer was confirmed that it sprayed enough on all the parts of a plant in green house including the blind spots. Additionally, it does not exceed the minimum residue limits on the all parts of pesticides residue conditions. When using remote controlled sprayer, water sensitive paper were changed to blue color (82.5% and 81.2%) in terms of controlling Bemisia tabaci and Aphis gossypii based on the two spraying manners. 53.0% and 42.6% of control effect were shown on the fair parts of the plants. However, on the poor parts on which pesticides were not well-sprayed, thus, not-remained, more number of pests increased. Meanwhile, on farming that only one type of pesticide has been used, resistance pests present with very low control effect, even though sufficient amount of pesticide was well-sprayed. On the test of the optimum amount of spraying per a unit area, which shows no differences in the two cases of using 5L and 2.5L of chemical pesticides on 9 plants of paprika that has 81.8% and 84.5% control effect, respectively.

• Korean journal of applied entomology
• /
• v.62 no.3
• /
• pp.139-147
• /
• 2023

Leaf-spray in vitro bioassays appraise new aphicidal formulations for managing deleterious plant-feeding aphids. The formulation may utilize alternative and integrated strategies. However, leaf spraying even under controlled conditions may affect aphid reproduction and mortality. This study examines leaf spray applications for optimum and reproducible aphicidal results using tobacco leaves overlaid on cotton fabric or water agar surfaces. Infestation of the undersides of tobacco leaves with nymphs of green peach aphids was used in the assays. Spray distance and volume were optimized using water-sensitive paper to ascertain the best surface coverage. Overlays of the leaves on water agar caused less mortality and greater reproduction than the use of cotton fabric. The relative humidity of the insect-rearing chambers changed with the watering regime for the insect - rearing chambers with cotton fabric; 60% relative humidity was optimal. Relative humidity was not affected by the concentration of agar in the water agar chambers. Applications of the chemical aphicidal standard, Sulfoxaflor, under the optimized conditions exhibited similar times for lethality although the rate was faster with leaves on the cotton fabric than on water agar. These studies establish reproducible and sensitive techniques for assessing the lethality and effects on reproduction of potential aphicidal products.

• Journal of Convergence for Information Technology
• /
• v.10 no.10
• /
• pp.135-142
• /
• 2020

In the recent farming industry, there is a growing diffusion of drones, which are recognized as a crucial technology of the 4 th industrial revolution to cope with aging. Especially, filming and pest control using drones are representative fields that have different age groups for obtaining a national license of multicopter that is a ultra-light flying device, and can create profits after getting a license. However, pest control technology using drones has different spray effects depending on levels of operational proficiency, since this highly relies on an operator's operating skills. It is anticipated that if this issue is supplemented, the use of drones for pest control in the farming industry will diversify. For analysis of spraying characteristics of agricultural pest control drones, this study aims to formulate effective spraying hours and effective spraying intervals and suggest an algorithm, which facilitates an accurate calculation of pest control area depending on the kinds of pest control drones. This algorithm can be used in the field of pest control by improving scatterling issues caused by drone flight methods of drone pest controllers and building an optimum pest control manual in future.

• The Korean Journal of Pesticide Science
• /
• v.19 no.2
• /
• pp.106-112
• /
• 2015

This experiment was carried out to investigate the best spray timing for the control of the bacterial shot hole with Bordeaux mixture (6-6) after wintering in the peach orchard. We sprayed Bordeaux mixture (6-6) on 'Mibaekdo', 'Yumyeong' and 'Cheonhong' of peach verities from late-March to mid-April in 2001, 2002 and 2014, and examined how much bacterial shot hole and chemical injure occurred. The infection rate of bacterial shot hole according to spray time was 10.2 to 11.7% at leaves, and 1.7 to 2.2% at fruits in 2002. And Efficacy of the Bordeaux mixture treatment for control of bacterial shot hole at full blooming time 21.2 to 30.4% at leaves, 1.7 to 4.4% at fruits in 2014. The chemical injure occurred slightly for one week hence. The fruit bearing rate was 20.7 to 29.8% at 'Mibaekdo', and 35.4 to 61.9% at 'Yumyeong' peach trees. When the spray at the time of blooming period by bordeaux mixture was investigated the control effect of bacterial shot hole disease. The infected leaves was better than 21 to 25% twice the quantity of finished products and bordeaux self-preparation about 28 to 30% base quantity of finished products, also the control efficacy was higher in infected fruits trends in bordeaux self-preparation method and twice the quantity of finished products.

• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.342-351
• /
• 1998

노면표시는 운전자에게 시선유도와 각종 규제 및 지시에 대한 정보를 제공함으로써 교통안전 및 소통에 도움을 주는 시설로써 주야간의 시인성 확보가 중요하며 이를 위해서는 반사화가 필요하다. 노면표시의 반사성능은 유리알 (Glass Bead)의 함량 및 종류, 용융온도, 도료의 색도등 각 영향인자에 의해 결정되지만 현재는 시공법 및 관련 연구의 미흡으로 현행기준의 최하수준을 상회하는 정도로 제공되고 있다. 따라서 본 연구에서는 노면표시의 시공에 관계되는 각 요인중 반사성능가 내구성에 영향을 미치는 주요인자 및 반사성능을 최적화하기 위한 인자별 최적조합을 도출하였다. 연구결과 유리알 살포량이 중량비로 25%-30%, 용융시 온도가 $188^{\circ}C$$\pm$$10^{\circ}C$일 때 노면표면시의 반사성능이 최적화됨을 밝혀내었다. 또한 유리알의 품질개선과 함께 황색 노면표시의 재귀반사 휘도계수 기준을 현재 기준보다 상향조정할 필요성이 있음을 제안하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.389-395
• /
• 2017

A study was carried out to improve the field implementation of asphalt surface reinforcement method which is a preventive maintenance. Mean Texture Depth (MTD) was measured to quantify the surface condition and used to determine the optimum application rate. Determining the application rate using MTD can reduce the material loss from 30% to 15%. In order to reduce the curing time to 30 minutes, the heat capacity of $317kcal/m^2$ is required. Therefore, the design capacity of the heating curing device requires more than 380,000 kcal/hr. The asphalt surface reinforcement method is preferably applied at a time when slight cracking occurs before the permanent deformation becomes serious. Through the analysis of the pavement survey data, it was decided to apply the surface reinforcement method at the crack rate of 3~4%. Heating the surface reinforcement agent to $50^{\circ}C$ improves workability and ensures sufficient penetration depth even at a crack width of 1 mm. The results will be utilized as basic data for the development of automated construction equipment for efficiency improvement.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.53-60
• /
• 2010

In the present study, experiments have been performed to investigate the possibility of removing Cochlodinium polykrikoides using the dredged sediment from a coastal fishery and then to derive the optimal conditions; the amount and particle size of dredged sediment besprinkled into water, the thermal treatment, the types and amounts of additives, and the depth profile of Cochlodinium polykrikoides. Results showed that the optimal amount of dredged sediment besprinkled into water was 6~10 g/L, and the removal efficiency of Cochlodinium polykrikoides after the reaction time for 60 min was 73~93%. Note that, in the real sea water, it is necessary to besprinkle 6~10 $kg/m^3$ of dry dredged sediment on a unit area (1 $m^2$). With decreasing particle size, Cochlodinium polykrikoides could be more efficiently removed. The removal efficiency was 93% with the dredged sediment smaller than 100 ${\mu}m$, whereas it was 51% with that of 100 ${\mu}m$ ${\mu}m$. Since most of dredged sediment (over 90%) was smaller than 100 ${\mu}m$, high efficiency could be obtained by besprinkling only the dredged sediment without pre-treatment. CaO was found to be an effective additive in promoting the removal efficiency (up to 99%). The optimal amount of additive was 5~10%, however, it was necessary to use as small amount of an additive as possible in order to avoid the sharp increase in pH. The removal efficiency increased with increasing depth profile of Cochlodinium polykrikoides. The removal efficiency was 83% at 5 cm depth, whereas it was 93% at 50 cm depth. In the sea water, red tide occurred within 3 m depth, and furthermore most Cochlodinium polykrikoides existed within 1 m depth. It was, therefore, expected that higher removal efficiency of Cochlodinium polykrikoides could be obtained when the dredged sediment was besprinkled into the sea water. The removal efficiency of Cochlodinium polykrikoides was up to 93% when the dredged sediment (<100 ${\mu}m$) was besprinkled into water at the ratio of 10 g/L. This result was comparable to that obtained with loess (90~97%). All the results in the present study indicated that the dredged sediment from a coastal fishery could be successfully used as a substitute of loess for removing the red tide alga.