• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.559-567
• /
• 2005

The objective of this study is to optimize the use of mineral admixtures (silica fume, fly ash, and blast furnace slag) in high-performance concrete for bridge deck overlay. For this purpose, high-performance concrete, incorporating mineral admixtures, was tested for compressive strength and permeability. The Box Behnken design was used to determine the optimum mix proportions of the mineral admixtures. The optimized mix compositions were then technically evaluated. Test results are compare with the performance specification for high performance concrete overlay on bridge deck. The optimum mix proportions were shown to possess acceptable properties. Also, it is possible to save the construction and materials costs result from a reduction In actual material cost and from the use of widely avaliable truck mixers instead of mobile mixers.

• 레미콘
• /
• no.7 s.68
• /
• pp.41-51
• /
• 2001

• International Journal of Highway Engineering
• /
• v.6 no.4 s.22
• /
• pp.13-24
• /
• 2004

The Marshall mix design method used in Korea, which was described in the design & construction regulation, had been introduced from Japan Highway Cooperation standard guide. Most engineers have thought that it is the major reason that causes pavement distresses. Therefore, there is a need to modify the current Marshall mix design through using the volumetric design concept, which is most widely used in asphalt mix design. The modified mix design determines the preliminary optimum asphalt content at 4% VTM (Voids in Total Mix). If the Marshall properties, which are VFA, VMA, stability, and flow, were satisfied with the requirements, the preliminary optimum asphalt content is determined as the final optimum asphalt content. The modified Marshall mix design considers VMA. while the current Marshall mix design does not consider VMA. By considering the Marshall stability and flow as the criteria instead of design factors, the modified Marshall mix design is able to decrease the errors occurred in Marshall stability test The test was performed to compare the Marshall properties between current and modified Marshall mix design. The left results showed that there was no difference in the Marshall properties, except for VTM. Thus, the modified Marshall mix design can produce the asphalt mixtures with the constant VTM (4%), and it can improve the asphalt mixture quality in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4832-4836
• /
• 2012

In general, there are needed lots of time and experiments for determination of optimum asphalt content and mix design. The experimental results are highly depended on the skill of testers. Bailey suggested the proper aggregate gradation of hot mix asphalt are a function of special size and passing percent of the specified aggregate to reduce the test errors. In this paper, the asphalt mix designs of 19mm dense graded mix and PA-20mm for FHWA were carried out, using Bailey's method. The use of Bailey method can cut down the testing times to get the proper aggregate gradation for asphalt mix design. In case of 19mm dense graded asphalt mixture, the measured values of CA, $FA_c$, $FA_f$ are 0.724, 0.440, and 0.455, which are within the suggested values by Bailey. Also, in case of PA-20 graded asphalt mixture, the measured values of CA, $FA_c$, $FA_f$ are 0.646, 0.476, and 0.450, respectively.

• Journal of the Korea Concrete Institute
• /
• v.19 no.3
• /
• pp.377-383
• /
• 2007

In recent years the field application of high performance concrete has been increased to improve the quality and reliability of concrete structures. The mix design of the high performance concrete includes the 2 set-off mixture theory of mortar and coarse aggregate and that of paste and aggregate. The 2 set-off mixture theory of mortar and coarse aggregate has a problem of having to determine its value through repeated experiments in applying the rheological characteristics of mortar. The 2 set-off mixture theory of paste and aggregate has never been applied to high performance concrete since it doesn't take into account the relationship between optimum fine aggregate ratio and unit volume of powder nor does it consider the critical aggregate volume ratio. As the mixture theory of these high performance concretes, unlike that of general concrete, focuses on flowability and charge-ability, it does not consider intensity features in mix design also, the unit quantity of the materials used is determined by trial and error method in the same way as general concrete. This study is designed to reduce the frequency of trial and error by accurately calculating the optimum fine aggregate ratio, which makes it possible to minimize the aperture of aggregate in use by introducing the maximum density theory to the mix design of high performance concrete. Also, it is intended to propose a simple and reasonable mix design for high performance concrete meeting the requirements for both intensity and flowability. The mix design proposed in this study may reduce trial and error and conveniently produce high performance concrete which has self-chargeability by using more than the minimum unit volume of powder and optimum fine aggregate with minimum porosity.

• International Journal of Highway Engineering
• /
• v.6 no.4 s.22
• /
• pp.65-73
• /
• 2004

Marshall stability and flow don't reflect mechanical property of asphalt mixtures and have little correlation with rutting-related performance. There is often rutting occurred on the asphalt pavement which was constructed using a mixture passing the specification for stability and flow. This study dealt with comparison of volumetric properties of mixtures from Marshall mix design and from Superpave mix design. This study used one binder, three aggregates and two gradations. The mixtures were manufactured by each mix design method. Result showed that OAC, VMA and VFA by Marshall mix design were higher than those by Superpave mix design. This is because Mashall mixture has the gradation prone to rutting and it should be further investigated whether or not the high OAC is direct cause of rutting in asphalt pavement.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.468-474
• /
• 2010

최근 국내에서 연약지반개량을 위하여 적극 도입되기 시작한 차세대 지반처리기술인 경량혼합토공법의 배합설계에 대한 고찰을 하였다. 경량혼합토는 건설잔토나 준설토 및 현장에서 발생하는 점토나 실트질 흙을 사토처리 하지 않고 현장에서 유용할 수 있는 매우 경제적이고 환경적인 공법으로서 일본에서는 지난 10여년에 연간 수백만톤의 경량혼합토를 생산하여 건설현장에 적용한 실적을 보유하고 있다. 특히 폐자원(폐타이어가루, 왕겨)을 경량혼합토에 첨가하여 건설재료 재활용을 위한 역학적 실험을 수행하였다. 본 연구에서는 경량혼합토를 제작하기 위해 필요한 배합설계변수인 원료토의 중량, 함수비 및 기포재와 첨가할 물의 양, 그리고 강도를 발현하기 위하여 필요한 고화재로서 시멘트첨가량에 대한 최적의 배합설계에 대한 분석을 하였다. 지금까지 제안된 시멘트함유량은 초기의 경량혼합토 목표강도가 주어지면 원료토의 조건에 따라 원하는 비중과 강도를 토대로 적절하게 현장에 적합하게 결정하는 단계에 있으나 일부 현장에서 지나친 목표강도 설정으로 과대한 시멘트를 사용하는 사례가 많아 국가적으로 막대한 손실을 초래하고 있다. 본 논문에서는 경량혼합토의 목표강도을 분석하고 그에 따른 최적의 시멘트함유량을 제시하고자 한다.

• Journal of the Society of Disaster Information
• /
• v.8 no.3
• /
• pp.204-212
• /
• 2012

Lightweight soils are very economical and environment friendly materials that are valuable in field without wasting construction materials, dredged soils and clay/ silty soils during construction. Recently, the research of lightweight soils mixed with recycled material (recycled tire powder, rice husks) have been investigated. In this study the mix design factors (i.e., weight of soil, water content, foaming agent and added water) were analyzed and optimized mix design was suggested using cement content for revealing strength. For the analysis the stress-strain behavior, strength with respect to time, and experimental strength for the component of recycled material were analyzed. Finally, target strength was determined to calculate reasonable and economical mix ratio and the optimized cement content was suggested.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.708-711
• /
• 2010

본 연구에서는 경량혼합토 배합설계변수인 원료토의 중량, 함수비 및 기포재와 첨가할 물의 양, 그리고 강도를 발현하기 위하여 필요한 고화재로서 시멘트첨가량에 대한 최적의 배합설계에 대한 분석을 하였다. 분석을 위해 폐타이어가루와 왕겨를 각각 혼합한 경량혼합토의 압축강도를 비교 분석하였다. 왕겨혼합토는 함유량 3%에서 최대강도가 발현되는 반면 폐타이어혼합토의 경우 함유량 6%에서 최대강도를 보여주었다. 현장에서 설계기준을 만족하기 위한 시멘트비와 폐성분을 적절히 혼합하면 합리적이고 경제적인 배합비를 산출할 수 있다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.26-38
• /
• 2020

Mixture design of self-compacting concrete is a typical multi-criteria decision making problem and conventional mixture designs are based on the low level engineering method like trials and errors through iteration method to satisfy the various requirements. This study concerns with performing the straightforward multiobjective design optimization of economic SCC mixture considering relative importances of the various requirements and cost-effectives of SCC. Total five requirements of 28day compressive strength, filling ability, segregation stability, material cost and mass were taken into consideration to prepare the objective function to be formulated in form of the weighted-multiobjective mixture design optimization problem. Economic SCC mixture computational design can be given in a rational way which considering material costs and the relative importances of the requiremets and from the result of this study it is expected that the development of SCC mixtue computational design and the consequent univeral concrete material design optimization methodology can be advanced.