이 글에서는 공정시스템공학의 주요 연구분야를 설명의 편리를 위해서 분류하였으나 실제로 그 경제가 확실치 않는 경우도 많다. 예를 들어 설계가 끝난 후 최적 운전을 연구하다 보면 설계를 다시 수정하는 것이 좋은 경우가 생긴다. 이 때에는 설계와 운전을 동시에 고려하여야 한다. 한편 설계, 제어, 운전이 유기적으로 통합되어 종합적인 관리 시스템으로 발전하게 될 것으로 전망되며, 이러한 공정시스템공학의 핵심기술은 환경, 에너지, 전자재료, 생물화공 등 많은 새로운 산업으로의 확대 적용도 기대되고 있다.
중수로형 원자력 발전소에서는 가동년수가 증가함에 따라 중수는 삼중수소로 오염된다. 오염된 중수의 정화에 적합한 공정으로 평가되는 기액촉매교환-화학평형 -증류공정으로 이루어진 촉매복합공정의 주요 설계변수를 설정하여, 이 변수들이 촉매탑 및 증류탑의 용적과 초저온 냉동부하에 미치는 영향을 분석하였다. 촉매탑은 조작선 기울기가 약 0.634, 그리고 제 1, 제 2 증류탑의 농축율 및 삼중수소 제거율을 변화시킬 때 최적 환류비 값이 각각 약 7과 4.7일 때 최적조건임을 밝혔다. 그리고 저온증류공정해석을 위하여 Fenske, Underwood, and Gilliland Equation과 Smoker Equation을 사용하여 이 두모델식의 계산값을 비교 검토한 결과 거의 유사한 설계값을 얻을 수 있음을 확인하였다.
Journal of the Korea Academia-Industrial cooperation Society
/
v.14
no.1
/
pp.7-12
/
2013
This paper proposed the optimal algorithm of grinding system and the method to realize it. The optimal function was proposed in order to design the optimal grinding process. DE(Differential Evolution) algorithm was used to obtain the selective optimal function. The realization of algorithm was implemented by LabView software used widely at industrial field and the proposed algorithm was verified for through computer simulation. The result of the proposed algorithm can be used for the guide line of the grinding process.
Proceedings of the Korean Society of Dyers and Finishers Conference
/
2012.03a
/
pp.112-112
/
2012
스포츠웨어 중 바람막이제품의 용도에 사용되는 소재는 폴리에스터와 폴리아미드 소재가 주류이며, 그 중에서 고품격의 바람막이 제품에 대해서는 주로 나일론6 소재를 사용하고 있다. 최근 소비자들은 삶의 질 향상과 야외활동의 증가로 인해 제품의 경량화, 안락한 착용감, 고기능성 등을 동시에 겸비한 제품을 요구하고 있다. 이러한 수요에 발맞추어 국내에서 많이 생산되고 있는 나일론6 소재를 이용하여 제품화 간계에서 경량감과 신축성이 발현될 수 있는 나일론6 소재의 경량 신축직물에 대한 연구개발이 요구되고 있다. 본 연구에서는 직물 단계에서의 경량감과 신축성이 발현될 수 있는 나일론6 소재 신축직물을 개발하기 위해 공중합 나일론6 폴리머와 일반 나일론6 폴리머를 복합방사 설비를 이용하여 side by side POY 26d/6f의 원사를 제조한 후 가연공정을 거쳐 개발된 DTY 20/6f 가연사를 직물 설계 시 위사방향으로 적용하여 제직을 실시하였다. 직물 설계 조건은 기존 T사에서 생산중인 나일론 DTY 20d/7f을 경사로, 개발 소재인 DTY 20/6f을 위사에 적용하였으며, 제직 시 경사밀도 2가지, 위사밀도 2가지로 설계하였으며, 조직의 변화에 따른 신축특성의 변화를 확인하기 위해 평직, Rib. 도비직으로 제직하였고, 이렇게 제조된 직물에 대해 전처리, 염색, 후가공, 코팅가공 공정 조건별로 테스트를 진행한 후, 신축성발현을 위한 최적 공정조건 확보를 위한 공정별 직물의 신축성 변화분석과 최적 공정을 통해 개발한 최종 직물에 대한 신축성 평가를 실시하였다. 테스트 결과, 제직 조건별로는 경사밀도와 위사밀도가 낮은 경우가 원단 내 수축이 더욱 많이 발생함으로써, 신축성이 향상됨을 알 수 있었으며, 조직별로는 평직, Rib. 도비직 순서로 신축성이 우수함을 알 수 있었다. 또한 공정별 신축성 변화분석 결과, 염색 시 가장 신축성 발현이 두드러지게 높은 것으로 나타났으며, 전처리는 일반 연속식 전처리 보다 CPB 전처리 공정이 이후 염색가공 및 코팅을 통해 제조된 직물의 신축성 향상 및 표면 평활성에 높은 기여를 하는 것을 알 수 있었다. 상기 조건에 서 얻어진 최적 공정 조건으로 제조된 최종 코팅직물의 경우에 22% 정도의 신축성이 나타나 개발 소재의 신축특성이 우수함을 확인하였다.
Proceedings of the Korea Society for Energy Engineering kosee Conference
/
1993.11a
/
pp.57-63
/
1993
냉열발전기술은 일본에서 많이 연구되어 다수의 상업 플랜트가 가동되고 있다. 일본에서는 천연가스 공급압력의 이원화(40 kgf/$\textrm{cm}^2$, 10 kgf/$\textrm{cm}^2$)로 직접 팽창방식을 적용할 수 있어 냉열발전의 경제성이 유리한 반면 국내에서는 비교적 높은 압력(70kgf/$\textrm{cm}^2$)의 단일 압력 공급체계에 적합한 냉열발전 시스템을 모색하여야 한다. 특히 발전용량 규모가 비교적 적은 냉열발전 시스템의 경제성 측면의 불리한 점을 고려할 때 적용 가능한 해당 발전공정들에 대해 전산모사의 방법을 이용하여 다양한 설계조건에서 최적의 조건들을 검토하여야 한다. 따라서 본 연구에서는 LNG의 저온 Exergy를 이용한 Rankine Cycle, LNG의 압력 Exergy를 이용한 부분팽창 Cycle 및 이 두 싸이클의 혼합 공정인 Linde 공정에 대해 현재 인수기지에서 운영되고있는 각종 설비들의 설계 데이타를 기준으로 상용모사기인 ASPEN PLUS를 이용, 국내 천연가스 공급 체계에 의거 각 공정별 최대 및 최적의 전력 발생 조건들을 검토하였다. 공정별 출력 및 엑서지 효율을 비교한 결과 약 3 ~ 6 Mw의 전력을 생산할 수 있음을 알 수 있었으며 최대 엑서지 효율은 37 %를 얻을 수 있었다. 또한 부분직접팽창방식의 최적시스템을 제시하였고 동일한 전열면적인 경우 부분직접팽창과 랭킨 싸이클의 성능은 비슷한 것으로 확인되었다.
Exponentially weighted moving averae(EWMA) control chart has been used widely for process monitoring and process adjustment recently, but there has not been many studies about the selection of the parameters. Design of the control chart can be classified into the statistical design and the economic design. The purpose of the economic design is to minimize the cost function in which all the possible costs occurring during the process are probability given the Type I error probability. In this paper the optimal parameters of the EWMA chart are selected for the economic design as well as for the statistical design. The optimal parameters for the economic design show significantly different from those of the statistical design, and especially the weight is always larger than that used in the statistical design. In the economic design, we divide the model into the single assignable cause model and the multiple assignable causes model caacording to number of which is used as the average context of the multiple assignable causes, it shows that the selection of the parameters may be misleading when the multiple assignable causes exist in practice.
Kim, Gi-Bo;Kim, Myeong-Su;Lee, Da-Hyeok;Park, Se-Geun
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.152-152
/
2014
최근 반도체의 고집적화로 high dose implant 도입과 소자의 동작 특성 향상을 위한 low-k 물질 도입에 따라 다양한 주변 공정의 변화를 이끌고 있다. 이에 따라 반도체 제조의 핵심 공정 단계 중 하나인 ashing 단계에서 기존 성능 이상의 장비를 기대하고 있으며, 그것을 평가하기 위한 중요 요소로 uniformity와 fast stripping이 있다. 본 연구에서는 유체해석 시뮬레이션을 통해 450 mm ashing 챔버에서의 gas inlet baffle과 wafer stage 사이의 최적 거리를 예측했다. 우선적으로 시뮬레이션의 신뢰도를 높이기 위해 실험으로 측정한 300 mm ashing 결과와 유체해석 결과 molecular flux의 상관관계를 파악하여, 450 mm ashing 챔버의 최적 구조를 예측하였다. 선행 연구한 300 mm 시뮬레이션 결과를 바탕으로 이상적인 450 mm ashing 챔버를 설계하였다. 유체해석 결과는 동일한 형태의 수직형 구조 장비에서 baffle과 wafer stage 사이의 거리가 35 mm에서 60 mm일 때, 450 mm wafer surface 위에서 더욱 균일한 density 분포를 나타내었다. Reactant flux 분포는 거리가 60 mm에서 80 mm 사이일 경우 더 균일하게 나타났다. 그러므로, 450 mm 챔버에서 gas inlet baffle과 wafer stage 간격이 60 mm일 때 최적의 구조로 판단된다.
In this work, the parameter optimization for thermal-sprayed Al/SiC composites have been designed by $L_9(3^4)$ orthogonal array and analysis of variance(ANOVA). Al/SiC composites were fabricated by flame spray process on steel substrate. The hardness of composites were measured using micro-vickers hardness tester, and these results were analyzed by ANOVA. The ANOVA results showed that the oxygen gas flow, powder feed rate and spray distance affect on the hardness of the Al/SiC composites. From the ANOVA results, the optimal combination of the flame spray parameters could be extracted. It was considered that experimental design using orthogonal array and ANOVA was efficient to determine optimal parameter of thermal-sprayed Al/SiC composites.
일반적으로 공정설계자는 실제 절삭을 위하여 각 공정의 표준 절삭조건에 대하여 적적한 보정을 수행한다. 이러한 보정과정에서 사용되는 지식은 경험에 바탕을 둔 것이므로 이의 시스템화는 경험 지향적인 방법론(Experience-Oriented Method)을 요구한다. 본 논문에서는 밀링 공정을 대상으로, 검색된 표준 절삭조건에 대하여 최적의 절삭조건을 결정하기 위한 방법과 제안된 방법에 의해 개발된 시스템을 소개한다.
Journal of the Korea Academia-Industrial cooperation Society
/
v.17
no.3
/
pp.73-78
/
2016
In this study, GTAW was carried out on austenitic STS316 stainless steel. Overlay welding with the stellite-base filler metal was implemented using a double torch. The response variable was calculated on the measured Vickers hardness for process optimization using the Taguchi method and its response variable was then analyzed about effect on overlay welding characteristics. The optimal process design by the Taguchi method is extremely effective in the overlay welding process for the multiple response variables. In addition, the effects of contribution rate about each response variable was analyzed easily. The conditions of the optimal process were 105A, 18V, pre-heat treatment at $200^{\circ}C$, and post weld heat treatment at $100^{\circ}C$. The Vickers hardness of the specimens produced under the optimal condition of GTAW by the double torch was 8.19% higher than that by a single torch.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.