• Title/Summary/Keyword: 최적경로선정

Search Result 145, Processing Time 0.034 seconds

Evaluation of material workability for ductile failures in cold forging process (냉간압조가공의 가공한계 예측)

  • 김영석
    • Journal of the korean Society of Automotive Engineers
    • /
    • v.16 no.1
    • /
    • pp.31-41
    • /
    • 1994
  • 1. 가공성 평가실험 및 평가기술. 1.1 가공성 평가시험법. 1.2 실험방법. 1.3 피단한계. 1.4 파단발생 평가이론. 1.5 파단평가이론의 적용. Bulk재 소성가공 공정중에 있어서 거시적 가공성평가 방법 및 응용방법에 대하여 논하였다. Bolt Heading 가공과 같은 냉간압조 가공에 있어서 상기 모델들에 의한 재료고유의 가공한계선과 변형경로를 비교하므로써 가공성을 평가할 수 있으며 또한 보다 복잡한 형상제품의 최적가공을 위한 가공조건 및 재질선정의 최적화에도 유용하게 이용될 수 있다.

  • PDF

Study on Optimal Location of Water Quality Measurement Sensor Based on Travel Time (도달시간 기반 상수관망 수질계측기 최적위치 선정에 관한 연구)

  • Eun Hwan Lee;Jeong A Wang;Song I Lee;Hwan Don Jun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.497-497
    • /
    • 2023
  • 정수장에서 소독 및 여과 처리가 완료된 깨끗한 물은 배급수시설로 전달되나, 실제로 관의 노후화, 갑작스러운 유향 변동, 특정 구역의 관 내 정체 시간에 따른 Water Age 상승 등 여러 요인으로 인해 실제 수용가에는 안전하지 않은 용수가 공급될 가능성이 있으며, 이에 따라 적절한 위치에서 지속적인 감시를 통한 조기 발견 및 조치가 필요하다. 상수도 시설기준(2010)에 배수시설의 주요 지점 혹은 관 말단 등 필요에 따라 적절한 위치에 수질 계측기를 설치할 수 있도록 제시되어 있으나, 계측기 설치 위치나 개수에 대한 기준이 모호한 실정이다. 모든 구역에 수질계측기를 설치하여 감시하는 것이 이상적이지만, 현실적으로는 지자체 환경 및 경제적인 한계가 있어 주요 위치에 설치하는 것이 바람직하다. 본 연구에서는 대표적인 수리해석 모형인 EPANET을 사용하여 대상 관망의 노후도, 유속, 유향변동 등의 영향인자를 바탕으로 수질사고가 발생할 확률이 높은 관을 위험관으로 선정하고, 선정된 위험관을 대상으로 최단 경로와 Cost를 산출할 수 있는 Floyd Warshall Algorithm을 이용하여 각 Node(수용가)간 물이 이동할 때의 최소 도달시간과 경로를 파악하였다. 또한, 시간 서비스 수준(Level of T hour Serivice)의 개념을 도입하여 위험관으로부터 특정시간 이내에 흐름이 도달하는 Node를 파악한 뒤, 그 중 가장 많은 피해를 발생시킬 수 있는 위험관을 수질계측위치 지점으로 선정하였다. 제시된 수질사고 발생위험이 높은 위험관을 대상으로 수질계측 위치를 선정하는 방법이 전체 관망 네트워크를 대상으로 수질계측 위치를 판단하는 방법보다 결과 신뢰도 측면에서 더욱 효과적이고 효율적인 방법으로 사료된다.

  • PDF

Fuzzy-Neural Networks by Means of Advanced Clonal Selection of Immune Algorithm and Its Application to Traffic Route Choice (면역 알고리즘의 개선된 클론선택에 의한 퍼지 뉴로 네트워크와 교통경로선택으로의 응용)

  • Cho, Jae-Hoon;Kim, Dong-Hwa;Oh, Sung-Kwun
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.14 no.4
    • /
    • pp.402-410
    • /
    • 2004
  • In this paper, an optimal design method of clonal selection based Fuzzy-Neural Networks (FNN) model for complex and nonlinear systems is presented. The FNNs use the simplified inference as fuzzy inference method and Error Back Propagation Algorithm as learning rule. Also Advanced Clonal Selection (ACS) is proposed to find the parameters such as parameters of membership functions, learning rates and momentum coefficients. The proposed method is based on an Immune Algorithm (IA) using biological Immune System and The performance is improved by control of differentiation rate. Through that procedure, the antibodies are producted variously and the parameter of FNN are optimized by selecting method of antibody with the best affinity against antigens such as object function and limitation condition. To evaluate the performance of the proposed method, we use the time series data for gas furnace and traffic route choice process.

A Hybrid Navigation System for Intelligent Wheelchair (지능형 휠체어를 위한 하이브리드 내비게이션 시스템)

  • Ko, Eun-Jeong;Ju, Jin-Sun;Kim, Eun-Yi
    • 한국HCI학회:학술대회논문집
    • /
    • 2009.02a
    • /
    • pp.552-557
    • /
    • 2009
  • In this paper, we propose hybrid navigation system, for obstacle detection and avoidance in Intelligent wheelchairs (IWs). To robustly detect obstacles and avoid them on various environments, hybrid navigation system combines both range-sensor and camera information. For this, 10 range-sensors (2 ultrasonic and 8 infra-red sensors) and CCD camera are used. Through processing the informations obtained from those sensors, our system can detect obstacles with various sizes and shapes, and then avoid them. To assess the effectiveness of the proposed hybrid navigation system, it was tested on complex environments including various obstacles, then the results showed the potential of our system as mobility aids for disabled people.

  • PDF

A Study on the Propagation Prediction Model for Microcell in Mobile Communications (이동통신 마이크로셀의 전파예측 모델에 관한 연구)

  • Choi Dong-You;Choi Dong-Woo;Kim Young-Gon;Noh Sun-Uk;Park Chang-Kyun
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • spring
    • /
    • pp.351-355
    • /
    • 1999
  • 서비스 반경이 1이내인 마이크로셀 방식은 기지국의 송신출력을 가능한 작게 하고 안테나의 위치를 주변 건물의 높이보다 낮게 설치하기 때문에 셀 반경내에 있는 지형과 구조물들은 전파특성에 매우 큰 영향을 주므로 셀 내 지형지물의 특성에 따라 기지국의 최적 출력을 구할 수 있는 전파예측 모델이 필요하다. 본 연구에서는 이동국이 가시거리 영역의 전파 음영지역 또는 가시거리 영역과 일정 경사각으로 기울어져 있는 비가시거리 영역에 위치한 경우로 구분하고, 기지국으로부터 송신된 신호가 이동국까지 일정 직진경로를 전파하는 동안, 전파의 반사첫수와 전파경로를 계산할 수있는 연산처리 알고리즘을 개발하여, 이를 웅용하므로써 임의 지점에 위치한 이동국에 도래하는 수신전력을 예측할수 있는 모델을 제안한다. 그리고, 마이크로셀 이동통신 전파환경에서 개발 알고리즘과 제안 전파예측 모델을 시뮬레이션하여, 그 결과를 분석함으로써 마이크로셀 기지국의 최적 위치선정 조건과 기지국 출력에 따른 가입자 서비스 조건을 제시한다.

  • PDF

Empirical Propagation Path Loss Model for ATC Telecommunication in the Concourse Environment (콘코스 환경에서 항공 정보통신의 실험적인 전파 경로 모델에 관한 연구)

  • Kim, Kyung-Tae;Park, Hyo-Dal
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.38A no.9
    • /
    • pp.765-772
    • /
    • 2013
  • In this paper, we studied the path loss model of Air Traffic Control(ATC) telecommunication radio channel at the Incheon International Airport(IIA) concourse area. We measured wave propagation characteristics on the two frequencies among VHF/UHF channel bands. The transmitting site radiated the Continuous Wave(CW). The propagation measurement was taken using the moving vehicle equipped with receiver and antenna. The transmitting power, frequency, and antenna height are the same as the current operating condition. The path loss exponent and intercept parameters were extracted by the basic path loss model and hata model. The path loss exponents at Concourse area were 3.1/3.13 and 3.01/3.38 respectively in 128.2MHz and 269.1MHz. The deviation of prediction error is 2.77/3.17 and 4.01/3.66. The new path loss equation at the Concourse area was also developed using the derived path loss parameters. The new path loss model was compared with other models. This result will be helpful for the ATC site selection and service quality evaluation.

Multicast Routing Protocol in Mobile Networks (이동네트웍에서의 멀티캐스트 라우팅 프로토콜)

  • 신희숙;서영주
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 1999.10c
    • /
    • pp.445-447
    • /
    • 1999
  • 이동호스트를 지원하는 이동네트웍에서의 멀티캐스팅 문제는 빈번한 그룹 멤버쉽의 변화와 함께 그룹 멤버의 위치 변화를 가져와 기존의 고정 호스트를 기본으로 설계된 멀티캐스트 프로토콜을 적용하는 것은 적합하지 못하다. 이런 점에서 특히 Mobile IP를 기본 유니캐스팅 방법으로 사용하는 환경에서 이동호스트를 위한 몇가지 멀티캐스팅 방식이 제시되었으나, 비최적 경로의 데이터 전송, 비효율적인 데이터 중복 전송 또는 빈번한 멀티캐스트 트리의 재구성으로 인한 오버헤드 등의 문제점을 내포하고 있다. 따라서 본 논문에서는 이런 문제점을 좀 더 보완하면서 Mobile IP를 사용하는 이동호스트에게 IP 멀티캐스트를 제공하는 효과적인 프로토콜을 제안한다. 호스트의 이동성을 적극 반영하여 유동적으로 멀티캐스트 포워더(Multicast Forwarder)를 선정함으로서 데이터 전송 경로의 단축, 중복되는 데이터 전송의 감소와 같은 효과를 얻을 수 있고 그 결과를 시뮬레이션을 통하여 확인해 본다.

  • PDF

Dynamic Routing and Scheduling of Multiple AGV System (다중 무인운반차량 시스템에서의 동적 라우팅과 스케줄링)

  • 이상훈
    • Proceedings of the Korea Society for Simulation Conference
    • /
    • 1999.10a
    • /
    • pp.100-107
    • /
    • 1999
  • 무인 운반차량 시스템 (AGV System) 의 이용도가 날로 증가함에 따라 시스템의 최적화 및 운영 방법에 관한 많은 연구가 진행되고 있다. 이에 본 연구에서는 AGV System에서 사용하는 Routing 및 Scheduling 정책들을 연구하고 이를 개선할 수 있는 새로운 방안을 모색한 후, 컴퓨터 모델링 기법을 이용한 보다 객관적인 시뮬레이션을 수행하여 최적의 AGV System과 그에 적합한 운영 정책을 제시하는데 그 목적이 있다. 따라서 본 논문은 크게 AGV Routing 과 Scheduling에 관한 연구로 나누어진다. AGV Routing은 AGV의 이동경로를 설정하는 것으로서 충돌 방지 (Collision Avoidance)와 최단경로 탐색 (Minimal Cost Path Find) 이라는 두 개의 주요 알고리즘으로 이루어진다. AGV Scheduling 은 장비의 공정시간과 AGV의 Loading/Unloading, Charging 시간으로 인해 불규칙한 Event 가 일어났을 경우 AGV 각각의 Jop을 알맞게 선정해주는 정책을 말하며 일반적으로 AGV Selection Rule, Charging Rule이 여기에 속한다. 본 연구에서는 이러한 알고리즘들이 반영된 AGV System을 컴퓨터 모델로 구축하여, 기존 시스템에서 사용되고 있는 여러 운영 정책들의 문제점들을 분석하였으며, Multiple AGV System을 최적화 시키는 운영 정책이 보다 객관적으로 제시되었다.

  • PDF

An Analysis of Cross-eye Characteristics for Electronic Protection of Radar (레이다의 전자 보호용 위상정합 특성 분석)

  • Chae Gyoo-Soo;Lim Joong-Soo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.7 no.1
    • /
    • pp.52-56
    • /
    • 2006
  • This paper presents a cross-eye characteristics of multi-path wave scattering. Cross-eye method uses the phase differences of multi signals and is used fur electronic protection. When a signal is propagated from transmitter to receiver on the ground surface, direct wave and reflected wave signals are combined in front of the receiving antenna with different phases. To calculate and control the amplitude and phase of reflected signal, we have developed a cross eye electronic protection method for radar system and studied the variation of electric power density.

  • PDF

Applying the Analytic Hierarchy Process to Select the Optimal Route for Hazardous Material Transport (AHP 기법을 활용한 위험물 수송의 최적경로산정)

  • Son, Eu-Gene;Bae, Sang-Hoon
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.13 no.4
    • /
    • pp.67-77
    • /
    • 2010
  • Growth of oil and chemical industries has been remarkable during recent years. Hazardous materials (Hazmat) make frequent use in the wide range of industries. It increases the frequency of Hazmat transport and it leads to increase the number of accidents. Optimal Hazmat routes can reduce damage. Thus, the objective of this study is to minimize the areas impacted by Hazmat accidents by adopting experts' opinion in planning the route. We calculated weights using AHP (Analytic Hierarchy Process) and deduced the best route by applying this weights. Results showed that in the case of shortest route versus weighted route, the percentage of population damage has been decreased by 33.4% in the comparison between shortest route and optimally weighted route. And the percentage of environmental damage also has been decreased by 21.8%. Social damage has been decreased by 1521.7%. In the case of none weighted route versus weighted route, the percentage of population damage has been decreased by 2.6% when we adopted weighted route. Consequently, the recommended route with weighted risk assessment avoids densely populated area comparing with none weighted route. Further research needs to be carried out in order to figure out the specific cost-effectiveness analysis applying the equal cost unit for each factor.