• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.3
• /
• pp.239-248
• /
• 2007

Although high nutritional values and continuous identification of important functional substances of soybean [Glycine max (L.) Merrill.] promote consumption of soybean products worldwide, informations on quality of brand soybean is not enough for consumers. Total of 100 brand soybeans [32 for soypaste and source, 45 black testa (lage), and 17 black testa (small) or medicinal soybean and beansprout soybean] were collected at supermarkets and several external quality factors were analyzed. Brand soybeans were marked with the environmental friendly and intimating words along with soybean (white or yellow), black soybean (black-, frost-, late frost-, green or inner-green-), medicinal soybean and beansprout soybean. Among 100 brand soybeans 30% was 1 kg package and 59% was 500 g package, difference between printed and actual weights of 70% brand soybeans was ${\pm}1%$ and weights of 2/3 of brand soybeans were higher than printed weight. Range of 100 seed weights of soypaste and source, black testa (large) and black testa (small) and beansprout soybeans were $23.7{\sim}47.8g$, $21.9{\sim}44.5g$ and $9.5{\sim}15.0g$, respectively. Although ranges of 100 seed weights of soypaste and source and black testa (large) soybeans were similar, 63% of soypaste and source were less than 29 g, while 78% of black testa (large) soybeans were higher than 30 g. Although average and highest percentages of seeds separated with 6.7 mm sieve were similar with 87.4% and 99.9% for soypaste and source soybean and 86.5% and 99.5% for black testa (large) soybean, respectively, the lowest percentages were 70.7% for soypaste and source soybean and 14.4% for black testa (large) soybean. When 100 seed weight was greater than 35 g, 90% of seeds were remained on 6.7 mm sieve. On the other hand 100 g weight and percentage of seeds remained on 6.7 mm sieve showed significantly positive correlations [r=0.7488** for soypaste and source soybean and r=0.7874** for black testa (large) soybean when 100 seed weight was $20{\sim}30g$. Based on hilum color and/or appearance, 76% of brand soybeans collected (more than 90% in yellow testa soybeans) were found to be mixed more than 10% with other cultivars or landraces. Foreign materials such as sand, piece of clothe, wood piece, dead insects, other soybeans were found in 20% of brand soybeans. Average test weight of brand soybeans was 762g $L^{-1}$ with a range of $645{\sim}820g\;L^{-1}$. Soybeans from local markets were as good as brand soybeans in 100 seed weight, uniformity of seeds, weight of foreign materials and test weight.

• Sijohaknonchong
• /
• v.23
• /
• pp.161-188
• /
• 2005

The purpose of this study was to delve into the morphological types of Sijo in an effort to determine the morphological structure of Sasul-sijo, and it's also attempted to present standard about how to discriminate Pyong-si, Eos-sijo and Sasul-sijo from one another from a morphological standpoint. It's suggested that Si with tee Jangs, six verses and 12 stanzas or more, with three Jangs, seven verses and 14 stanzas or more, and with three Jangs, eight verses and 16 stanzas or more should respectively be called Pyong-sijo, Eos-sijo and Sasul-sijo. After what Sijo was and what's not were discussed, how to distinguish Eos-sijo from Sasul-sijo was described, and finally, the structure of Sasul-sijo was presented. As for Sijo and non-Sijo, the types of works that consisted of tee Jangs, like Sijo, yet didn't suit its framework and Yuljo and were written in Chinese characters were regarded as non-Sijo. Concerning discrimination between Eos-si and Sasul-sijo, the type of Sijo that included one more or higher number of verse(s) and two more or higher number of stanzas in one of three Jangs was defined as Eos-sijo, and the type of Sijo that involved two more or higher number of verses and four more or higher number of stanzas in one of three Jangs was called Sasul-sijo. In other words, Eos-sijo contained one more verse in one of tee Jangs, and Sasul-sijo included one more Jang in one tee Jangs. The sort of Sijo that contained one more Jang in one of three Jangs could be viewed as Sasul-sijo. Regarding the structure of Sasul-si, there should be three Jangs, eight verses and 16 stanzas in one piece of Sasul-sijo. Any type of Sijo that contained two more or higher number of verses and four more or higher number of stanzas could be called Sasul-sijo. Such an addition of verse and stanza could done in various ways. The examples were (1) adding stanzas the first Jang, 2) adding stanzas to the second Jang, (3) adding stanzas to the final Jang, (4) adding stanzas to both the first and Second Jangs, (5) adding stanzas to th the second and final Jangs, and (6) adding stanzas to all the first, second and third Jangs at the same time. Besides, there was an extremely broad gap between the numbers of verse and stanza in Sasul-sijo, which ranged from a low of eight stanzas to a high of 87 ones in one of three Jangs.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.6
• /
• pp.856-868
• /
• 2009

This study was conducted to investigate causes for health problems among college women by analyzing factors related to their dietary habits, physical development, health habits, and blood parameters. The subjects were ages 20 to 24 years, lived in the Seoul area and were randomly selected during March, 2008 to August, 2009. The average height and weight of the overall subjects were $162.02{\pm}4.89\;cm$ and $53.96{\pm}7.00\;kg$, respectively. According to a 3-point assessment scale for the subjects' dietary habits, the average point value was 21.2. The percentage of subjects that ate breakfast daily was only 30.5%, and they omitted regular meals at least once a week. Approximately 83.5% of the subjects reported eating out often or frequently, and preferred Korean foods when they ate out. The subjects had interim meals (snacks) one or two times daily, and 40.4% of them preferred unbalanced meals. As their interim meals, among the 'good' group, ate breaded potatoes (39.3%), carbonated beverages, and ice cream (36.8%), whereas the 'poor' group, drank milk and ate dairy products (38.0%) as well as fast food and fried food (22.8%). Intakes of energy, fat, vitamins $B_2$ and $B_6$, niacin, folic acid, calcium, iron, zinc, and phosphorus were higher in the 'poor' group. The average hemoglobin level ($13.77{\pm}1.00\;g/dL$) among the subjects was within normal range; while 2.7% of subjects had hemoglobin levels under 11.1 g/dL (standard value) and were examined as anemic. The degree of interest in health was 24.5% higher among the subjects who had poor dietary habits. In contrast, among those who had good dietary habits, 49.6% reported they had no interest in regular exercise. The subjects reported that regular meals, nutrient intake, sufficient rest, and sleep as necessary to maintain health. The average amount of sleep obtained by the subjects was 6~8 hours. Among the 'poor' group, 36.2% reported that they exercised regularly, whereas 18.5% of the subjects in the 'good' group reported regular exercise (p<0.05). In conclusion, it appears necessary to provide nutrition education through teaching and to promote nutrition and health to college women so they can control their individual health status and create practicable dietary plans.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.3
• /
• pp.332-338
• /
• 2012

Soil compaction is one of the major problems facing modern agriculture. Overuse of machinery, intensive cropping, short crop rotations, intensive grazing and inappropriate soil management leads to compaction. This study was carried out evaluate of the effects soil texture and different compaction levels within the soil profile on the soybean root growth and productivity. The soybean plants were grown in $21cm{\o}{\times}30cm$ cylinder pots using three different soil textures (clay, fine loamy and coarse loamy) compacted at different compaction levels (1.25, 1.50, 1.75, and 2.00 MPa). Results revealed that soybean development is more sensitive on penetration resistance, irrespective of soil type. Soybean yield and root weight density significantly decreases with increasing levels of soil compaction in both clayey and fine loamy soils, but not in coarse loamy soil. The highest root weight density was recorded in coarse loamy soils, followed by fine loamy and clay soils, in descending order. The root growth by soil compaction levels started to decline from 1.16, 1.28 and 1.60 MPa for clay, fine loamy and coarse loamy soils. Soybean production in the field experiment decreased about 30% at compacted sub-soils compared to undisturbed soils.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.239-245
• /
• 2014

Purpose : The purpose of this study is to verify the accuracy of dose delivery according to the pitch and roll rotational setup error with 6D robotic couch in Intensity Modulated Radiation Therapy (IMRT) for pelvic region in patients. Materials and Methods : Trilogy(Varian, USA) and 6D robotic couch(ProturaTM 1.4, CIVCO, USA) were used to measure and analyze the rotational setup error of 14 patients (157 setup cases) for pelvic region. The total 157 Images(CBCT 78, Radiography 79) were used to calculate the mean value and the incidence of pitch and roll rotational setup error with Microsoft Office Excel 2007. The measured data (3 mm, 3%) at the reference angle ($0^{\circ}$) without couch rotation of pitch and roll direction was compared to the others at different pitch and roll angles ($1^{\circ}$, $1.5^{\circ}$, $2^{\circ}$, $2.5^{\circ}$) to verify the accuracy of dose delivery by using 2D array ionization chamber (I'mRT Matrixx, IBA Dosimetry, Germany) and MultiCube Phantom(IBA Dosimetry, Germany). Result from the data, gamma index was evaluated. Results : The mean values of pitch and roll rotational setup error were $0.9^{\circ}{\pm}0.7$, $0.5^{\circ}{\pm}0.6$. The maximum values of them were $2.8^{\circ}$, $2.0^{\circ}$. All of the minimum values were zero. The mean values of gamma pass rate at four different pitch angles ($1^{\circ}$, $1.5^{\circ}$, $2^{\circ}$, $2.5^{\circ}$) were 97.75%, 96.65%, 94.38% and 90.91%. The mean values of gamma pass rate at four different roll angles ($1^{\circ}$, $1.5^{\circ}$, $2^{\circ}$, $2.5^{\circ}$) were 93.68%, 93.05%, 87.77% and 84.96%. when the same angles ($1^{\circ}$, $1.5^{\circ}$, $2^{\circ}$) of pitch and roll were applied simultaneously, The mean values of each angle were 94.90%, 92.37% and 87.88%, respectively. Conclusion : As a result of this study, it was able to recognize that the accuracy of dose delivered is lowered gradually as pitch and roll increases. In order to increase the accuracy of delivered dose, therefore, it is recommended to perform IGRT or correct patient's position in the pitch and roll direction, to improve the quality of treatment.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.3
• /
• pp.153-163
• /
• 2017

The objective of this study is to enhance the model's speed of estimating weather variables (e.g., minimum/maximum temperature, sunshine hour, PRISM (Parameter-elevation Regression on Independent Slopes Model) based precipitation), which are applied to the Agrometeorological Early Warning System (http://www.agmet.kr). The current process of weather estimation is operated on high-performance multi-core CPUs that have 8 physical cores and 16 logical threads. Nonetheless, the server is not even dedicated to the handling of a single county, indicating that very high overhead is involved in calculating the 10 counties of the Seomjin River Basin. In order to reduce such overhead, several cache and parallelization techniques were used to measure the performance and to check the applicability. Results are as follows: (1) for simple calculations such as Growing Degree Days accumulation, the time required for Input and Output (I/O) is significantly greater than that for calculation, suggesting the need of a technique which reduces disk I/O bottlenecks; (2) when there are many I/O, it is advantageous to distribute them on several servers. However, each server must have a cache for input data so that it does not compete for the same resource; and (3) GPU-based parallel processing method is most suitable for models such as PRISM with large computation loads.

• Korean Journal of Environment and Ecology
• /
• v.32 no.5
• /
• pp.478-485
• /
• 2018

With the total population of 3,356 worldwide as of 2016, the black-faced spoonbill (Platalea minor) is designated as "endangered (EN)" species by IUCN. About 70% of population breeds on the uninhabited islands near the west coast of Korea and wintering area is Taiwan, China, Hong Kong, etc. However, there is few detail research in Korea and East Asia on black-faced spoonbill's long range migration and its habitat when migrating southward. We studied black-faced spoonbill's migration route, distribution, stopover, wintering sites, and timing of migration movements using a wild-tracker (WT-200, GPS-Mobile phone based telemetry, KoEco). We caught the black-faced spoonbills in the breeding sites (Gugi island, Bi island, Sangyeobawi, Chilsan island) in Korea in late June 2014. We attached the wild-tracker to 10 juvenile black-faced spoonbills. The tracking showed that the black-faced spoonbills started southward migration between late October and early November. The traveling distance to wintering site was maximum at 1,820 km, minimum at 746 km, the average at 1,201km. The maximum daily traveling distance was 1,479 km with an average of 782 km. The average days it took from breeding site to wintering site was 10 days (SD=10.7). The shortest duration was 2 days, and the longest duration was 34 days. Most individuals used 2-3 stopover sites between the breeding sites to the wintering sites and stayed almost 1-2 days (maximum 31 days). Stopover sites were wetlands such as rivers, streams, reservoir, and mud flat. The wintering sites were coastal areas (five individuals) in China, inland (one individual) in China, Taiwan (three individuals), and Japan (one individual). In conclusion, it is necessary to preserve the stopover sites and wintering site of the black-faced spoonbills through consultation and protection policy between countries and establish the systematic preservation measures and activity plans through continued moniting and additional studies.

• Journal of Food Hygiene and Safety
• /
• v.34 no.6
• /
• pp.562-570
• /
• 2019

The heavy metal concentrations in dried seafoods commonly consumed in Gyeonggi-do were analyzed. Concentrations of lead (Pb), cadmium (Cd), mercury (Hg) and selenium (Se) were measured in 95 samples with an inductively-coupled plasma-mass spectrometer (ICP-MS) and an Hg analyzer. The average concentration [mean±SD(minimum-maximum) mg/kg] of heavy metals were as follows: Pb 0.062±0.071(0.002-0.428), Cd 0.083±0.100(0.004-0.540), Hg 0.012±0.012(N.D-0.054) and Se 0.839±0.371(0.362-2.124). All the levels were below the recommended standards of the MFDS (Ministry of Food and Drug Safety). In the comparison of heavy metal content by anchovy size, it was shown that mercury was significantly higher in large anchovy (P<0.05). Selenium levels were found to differ significantly in small anchovy and large anchovy (P<0.05). Pb, Cd and Hg were significantly higher in Tiger prawn among shrimp (P<0.05). The heavy metal and selenium levels of anchovy and shad were highest in the intestine. However, the heavy metal and selenium levels of shrimp were highest in the head. In addition, weekly (monthly) intake of mercury and cadmium from dried seafoods was found to be 0.712% and 2.978% of PTW(M)I (Provisional Tolerable Weekly(Monthly) Intake) respectively. Therefore, it was found that dried seafoods were safe for consumption.

• The korean journal of orthodontics
• /
• v.33 no.5 s.100
• /
• pp.359-370
• /
• 2003

The purpose of this study was to evaluate the bond strength of orthodontic brackets bonded to metal bar with chemically cured adhesive (Ortho-one, Bisco Co, USA) in various types and directions of force application. Three types of metal bracket with different bracket base configurations; Micro-Loc base(Tomy Co, Japan), Chessboard base(Daesung Co, Korea), Non-etched Foil-Mesh base(Dentaurum, Germany); were used in this study. Peel, shear, tensile bond strengths were measured by universal testing machine and compared each other. The peel force directions applied were $0^{\circ},\;15^{\circ},\;30^{\circ},\;45^{\circ},\;60^{\circ},\;75^{\circ},\;90^{\circ}$ And then, in consideration of the different surface area of the bracket bases, the bond strength Per unit area were calculated and compared. The results obtained were summarized as follows: 1. The bond strengths according to the types and the directions of the forces were greatest at the shear forces in all three bracket base configuration groups(p<0.01). 2. As the peel force direction grew higher in degree, peel bond strength decreased. The Patterns of peel bond strength change according to force direction was similar in all three bracket base configurations. The minimum bond strength was 60 degree-peel bond strengths in all three bracket base configurations. 3. In Micro-Loc base group, minimum peel bond strength$(_{60}PBS)$ was in $29\%$ level of shear bond strength and $52\%$ level of tensile bond strength. In Chessboard base group, $_{60}PBS$ was in $34\%$ level of shear bond strength and $61\%$ level of tensile bond strength. In Non-etched Foil-Mesh base group, $_{60}PBS$ was in $34\%$ level of shear bond strength and $55\%$ level of tensile bond strength. 4. The bond strengths per unit area were lowest in Non-etched Foil-Mesh base group and highest in Chessboard base group(p<0.05). However, there were no differences in shear bond strength, tensile bond strength, $75^{\circ}\;and\;90^{\circ}$ per unit area between Micro-Loc and Chessboard base groups.

• Journal of Animal Environmental Science
• /
• v.10 no.3
• /
• pp.141-154
• /
• 2004

The solar powered water pump is very ideal equipment because solar power is more intensive when the water is more needed in summer and it is very helpful in the rural area, in which the electrical power is not available. The average so]ar radiation energy is 3.488 kWh/($m^2{\cdot}day$) in Korea. In this study, the automatic control logic and system of the water pump driven by the radiation energy were studied, designed, assembled, tested and analyzed for realizing the solar powered water pump. The experimental system was operated automatically and the cycle was continued. The average quantity of the water pumped per cycle was about 5,320 cc. The cycle time was about 4.9 minutes. The thermal efficiency of the system was about $0.030\%$. The pressure level of the n-pentane vapour in flash tank was 150$\%$450 hPa(gauge) which was set by the computer program for the control of the vapour supply. The pressure in the condenser and air tank during cycles was maintained as about 600 hPa and 1,200 hPa respectively. The water could be pumped by the amount of 128kg/($m^2{\cdot}day$) with the efficiency of $0.1\%$ and the pumping head of 10 m for the average solar energy in Korea.