• Journal of the Korean Society of Food Science and Nutrition
• /
• v.5 no.1
• /
• pp.19-24
• /
• 1976

A determination of proper maturity is a significant factor for a good quality and storage. This study is aimed at a determination of optimum harvest date related to a decisive measuring of maturity in Spur Golden Delicious. In this case, respiratory status and other characteristics are taken as a indicator for maturing determination. The results are as follows. 1. Respiratory rate has been decreased through a fruit development and come to its minimized point on Sep. 25. at last. On the contrary its tendency has been increased after Sep. 25. It is also estimated that the former is pre-climacteric, the latter climacteric rise based on dimacteric minimum Sep. 25. 2. A flesh hardness has maintained comparably high value until Sep. 18. But in the point of climacteric minimum, Sep. 25, curve of flesh firmness has rapidly been broken down, and after Sep. 25, tendency has slowly decreased at the sucessive date. 3. Pectin content, optimum acidity are remarkably decreased after Sep. 25, Oct. 2 respectively. 4. When water soluble sugar content shows to be swung from climacteric minimum, any resonable tendency are not found. 5. In this experiment, optimum harvest time is found by Oct. 2, in time of 145 days after flowering.

• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.45-52
• /
• 2008

The objectives of this study are to explain a supply plan of domestic softwood log by long-term prospect of MDF production to stably promote industry of MDF. For it, we developed the long supply function as Ordinary Least Squares Method. Between 2005 and 2050, it was estimated that quantity of domestic production of MDF increased from 1,653 thousand $m^3$ to 2,041 thousand $m^3$. In 2050, quantities of domestic softwood log used by raw materials to product MDF of 2,041 thousand $m^3$ were estimated to be used about 1,355 thousand $m^3$. Exampling Pinus rigida used presently by raw materials to product MDF, cutting area of it is estimated to be 10,828 ha per year. And larch is cutted about 9,160 ha per year. This study estimated annual softwood log cutting amount and total afforestation area at 2050 year by 3 scenarios which are 35%, 45% and 55% about use of domestic softwood log for MDF production. If we do a criterion of cutting area, we advantage to plant larch. But the species of trees are use and growth property. We think that the afforestation policy must be performed on the base of those to supply raw materials of MDF. Although government plans hardwood afforestation policy after cutting Pinus rigida, it needs to support and manage certainly afforestation area of softwoods to need to supply raw materials of MDF to stably promote industry of MDF.

• Journal of Korea Multimedia Society
• /
• v.13 no.5
• /
• pp.641-650
• /
• 2010

Color image sensors (CIS) output color images through image sensors and image signal processing. Image sensors that convert light to electrical signal are divided into CMOS image sensor and CCD image sensor according to transferring method of signal charge. In general, a CIS has RGB output signals from tri-stimulus XYZ of the scene through image signal processing. This paper presents an adaptive colorimetric analysis method to obtain chromaticity and luminance using CIS under various environments. An image sensor for the use of colorimeter is characterized based on the CIE standard colorimetric observer. We use the method of least squares to derive a colorimetric characterization matrix between camera RGB output signals and CIE XYZ tristimulus values. We first survey the camera characterization in the standard environment then derive a SGL(shutter-gain-level) function which is relationship between luminance and auto exposure (AE) characteristic of CIS, and read the status of an AWB(auto white balance) function. Then we can apply CIS to measure luminance and chromaticity from camera outputs and AE resister values without any preprocessing. Camera RGB outputs, register values, and camera photoelectric characteristic are used to analyze the colorimetric results for real scenes such as chromaticity and luminance. Experimental results show that the proposed method is valid in the measuring performance. The proposed method can apply to various fields like surveillant systems of the display or security systems.

• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.691-697
• /
• 2009

Hardware dedicated off-the-shelf maritime differential GPS RSIM lacks the open architecture to meet all the minimum maritime user requirements and to include future GNSS improvements after recapitalization. This paper carries out a study to replace existing hardware dedicated differential GPS RSIM with software differential GPS RSIM in order to make up the weak point of hardware dedicated off-the-shelf maritime differential GPS RSIM. In this paper, the architecture of software RSIM is proposed for maritime DGPS recapitalization. And the feasibility analysis of the proposed software differential GPS RSIM is performed as the first phase to realize the proposed architecture. For the feasibility analysis, the prototype RF module and DSP module are implemented with properties as wide RF bandwidth, high sampling frequency, and high speed transmission interface. This paper shows that the proposed architecture has the possibility of real time operation of software RSIM functionality onto the PC-based platform through the analysis of computation time. Finally, this paper verifies that the L1/L2 dual frequency software differential RSIM designed according to the proposed method satisfies the performance specifications set out in RTCM paper 221-2006-SC104-STD.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.3
• /
• pp.210-218
• /
• 2018

In order to generate meshes automatically for finite element analysis of complex structures such as aircraft, a large number of triangular elements are typically created. However, triangular elements are less accurate than rectangular elements, so it is difficult to obtain a reliable solution. This problem can be improved through the meshfree method using the back cell integration. However, this method also causes some problems such as over-use of the integration points and inefficiency of the integral domain. In order to improve these problems, a method of performing integration by setting the integral area based on a node basis has been proposed, but in the case of incompressible material problems, the numerical accuracy deteriorates due to the vibration phenomenon of the solution. Therefore, in this paper, the modified meshfree method is proposed which sets the integral domain as an element domain instead of the nodal domain, and the proposed method improves the numerical instability caused by the conventional meshfree method without decreasing the accuracy regardles of the shape of integral domain. The effectiveness of the modified meshfree method is verified by using 2-D examples.

• Journal of Korea Water Resources Association
• /
• v.40 no.12
• /
• pp.957-968
• /
• 2007

It is essential to obtain accurate and highly reliable streamflow data for quantitative management for water resources. Thereafter such real-time streamflow gauging methods as ultrasonic flowmeter and index-velocity are introduced recently. Since these methods calculate flowrate through entire cross-section by measuring partial velocities of it, rational and theoretical basis are necessary for accurate estimation of discharge. The purpose of the present study lies in analysis on the applicability of Chiu#s(1987, 1988) two dimensional velocity distribution equations by applying them to natural rivers and by comparing simulated velocity distributions with observed ones obtained with ADCP. Maximum and mean velocities are calculated from observed data to estimate entropy parameter M. Such isovel shape parameters as h and $\beta_i$ are estimated by object function based on least squares criterion. In case optimized parameters are applied, Chiu#s velocity distributions fairly well simulate observed ones. By using 14 simulated data sets which have relatively high correlation coefficients, properties of parameters are analyzed and h, $\beta_i$ are estimated for velocity-unknown river sections. When estimated parameters are adopted for verification, simulated velocity distributions well reproduce real ones. Finally, calculated discharges display rough agreement with measured data. The results of the present study mean that if parameters related are properly estimated, Chiu#s velocity distribution is likely to reproduce the real one of natural rivers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.384-390
• /
• 2018

Air and soil are being contaminated by the environmental pollution as a result of climate change and urbanization, resulting in water pollution reaching serious levels. In this studies, we investigated the use of antimicrobial copper for the removal of biological pollutants from water system. Specifically, we tested its effects against E. coli, B. subtilis, S. aureus, K. pneumoniae and P. aeruginosa. Made a sphere shape having a diameter of 2cm using a strip-shaped copper wire of 0.5g, 1g and 2g. And then, to confirm the antimicrobial activities, each copper ball was equipped in the broth which inoculated each pathogens. The results showed that bacterial growth of the five test bacteria was inhibited by more than 99% after reaction with a 0.5 g copper ball for at least 20 minutes. Based on the these results, if perform the further experiment such cytotoxicity, it is expected that will be enough to be used as a filter for water quality purification. The developed technique is expected to be widely applied in various industries.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.291-300
• /
• 2020

The cartridges used for illuminating a desired point or area are virtually limited in tests and evaluations because of limitations, such as noise during launch, the possibility of fires caused by illuminant charge, and the annual testable quantity. Therefore, to solve these problems, a ground fixed test, which replaces the firing test, or an evaluation method to perform limited tests, can be applied more efficiently. In this paper, the results of an 81mm illuminating cartridge, KM series performed in 2019 were analyzed comprehensively to identify the trends in reliability and quality characteristics and to estimate the shelf life. The shelf life was estimated to be at least 10 years based on the time when the lower confidence level reached 80% at a confidence level of 90%. Considering only major defects, the shelf life can be estimated to be approximately 23 years. On the other hand, the shelf life was estimated to be approximately 11 to 15 years and 25 to 28 years according to the effective illuminating time. Finally, an assessment plan of illuminating cartridges for the mortars was also presented as an improvement plan for an assessment method in the future.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.10
• /
• pp.1567-1582
• /
• 2015

The purpose of this study was to examine the status of environmentally-friendly ingredients and dietitians' perceptions toward them in order to find for improvement. Data was collected from questionnaires completed by 202 school dietitians and nutrition teachers in Chungbuk, and this data was analyzed utilizing the SPSS 20.0 program. The results obtained from this study were as follows: 'mixed grains (58.9%)' and 'eggs (36.6%)' were found to be the most used environmentally-friendly ingredients. 81.7% of the respondents said they 'never used' marine products, whereas 'fruits (43.6%)', 'pork (40.8%)', and 'fish (54.5%)' were the most preferred ingredients. Dietitians and nutrition teachers used environmentally-friendly marine products less than other ingredients, had a poor understanding about environmentally-friendly marine products, and demonstrated low reliability and belief in the necessity of the system. In order to verify the environmentally-friendly status of the ingredients, marks on the product and documents of certification were mostly used. In order to improve the supply system, a more strict tracking system in the distribution process by securing more reliable suppliers is required.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.607-616
• /
• 2015

The demand for cars has been so steadily increasing based on the economic growth that the number of registered cars reached 18,870,000 as of the end of December, 2012. Due to this, the demand for the parking lots also rises continuously. Because of the limited ground space, the buildings ever becoming larger, and the trend of underground parking spaces, recent parking spaces are generally constructed underground. Accordingly, the parking lot ramps slope is limited to less than 17% by relevant laws to ensure the driver safety. However, when a driver enters a parking lot ramps whose slope is slightly steep, he frequently experiences his car body colliding with ramp brackets and often sees the scratches on ramp floor. Thus, this study is intended to prevent any damage to a structure and to contribute to ensuring the riding comfort and safety of drivers and passengers by presenting the details of proper vertical curve to prevent the collision of vehicles with ramp brackets through a vertical analysis of the first and last parts of a parking lot ramps. Because it is necessary to decide the appropriate and suitable vertical slope of a parking lot ramps, this study first identified the problems through site inspection, targeting the parking lot ramps of large buildings frequently that are used by many random people. Next, the possibility of mutual collision was assessed through a theoretical analysis of the first and last parts of a parking lot ramps. Lastly, the vertical curve of a parking ramp was analyzed to estimate its details, which was presented in this study. In conclusion, if the vertical curve presented through this study is used, it will help prevent any damage to the cars and structures, ensure the riding comfort and safety of the drivers, and further reestablish the criteria for vertical installation of a parking lot ramps.