• Journal of Korean Society of Transportation
• /
• v.16 no.1
• /
• pp.151-164
• /
• 1998

본 논문은 통행배정과 교통신호제어기의 결합문제를 풀기 위한 새로운 해법의 제시를 목적으로 한다. 통행배정과 신호제어 결합모형은 네트웍 디자인 문제(Network Design Problem)로 비선형 비분리 목적함수(Nonlinear and Nonseparable Objective Function)와 비선형제약 및 비컴백스 집합(Nonlinear and Non-Convex Set)형태로 인해 다수의 국지해(Multiple Local Optima)를 갖는 특징이 있다. 따라서 이렇게 복잡하고 난해한 문제를 푸는 해법은 많은 국지해중에 가장 최소한 값(Global Optima)을 찾을수 있는 방법을 제공하여야한다. 전체최적해(Global Optima)를 찾 을 수 있는 기존의 방법들은 확률적최적화방법(Stochastic Optimization Methods)에 속한다. 본연구에서는 이러한 방법중 금속공학에서 발 견된 모의담금빌법(Simulated Annealing Method)에 근거한 해법을 제시한다. 이방법이 통행배정과 신호제어 결합문제에 적용되는지 검토하기 위해 이해법의 수렴성(Convergence)을 증명했으며 또한 실제 프로그램된 모형을 작은 고안된 네트워크에 적 용했다. 마지막으로는 개발된 해법의 실용성을 실험하기 위해 두 가지의 보다 큰 도로망에 적용 및 분석을 했다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.2
• /
• pp.177-187
• /
• 1989

When wavelength division optical coupler is fabricated with the polished single mode optical fiber, coupling coeffiecient differ from wavelength and distance to two cores. Wavelength division is function of the differential coupling coefficient to distance of two cores. This paper suggests the condition of the minimum spacing of the wavelength division with the function of the distance of two cores.

• Korean Journal of Crystallography
• /
• v.9 no.2
• /
• pp.143-148
• /
• 1998

Tris(biuret)chromium(III) Perchlorate Monohydrate (Cr(C2H5N3O2)3·(ClO4)3·H2O)의 결정 및 분자구조를 X-선 회절법으로 연구하였다. 결정의 공간군은 P, a=10.486(3) , b=11.371(5) , c=11.485(4) , α=88.70(3)o β=66.85(3)0, γ=67.11(3)o, V=1146.2(7) 3가 Z=2이다. 회절반점들의 세기는 Enraf-Noninus CAD-4 Diffractometer로 얻었으며, MoKα radiation X-선을 사용하였다. 분자구조는 직접법으로 풀었으며 최소자승법으로 정밀화하였다. 최종 신뢰도 R값은 1528개의 회절반점에 대하여 0.114이었다. Tris(biuret)chromium(III) cation은 octahedral 배열을 하고 있으며, 평균 Cr-O 결합길이는 1.94 이다. 모든 perchlorate anion은 각각 두가지 위치로 disorder되어 있다. 양이온과 음이온들은 물분자들을 포함한 수소결합들로 결합되어 결정을 이루고 있다. 양이온내의 모든 N-H가 모두 수소결합에 참여하고 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4357-4363
• /
• 2015

This study is to compare the differences of bonding strength based on the Degassing temperatures and various opaque materials for Ni-Cr alloy specimen which does not contain beryllium(Be). Numerous comparison tests have been performed to measure the bonding strength by experimenting 3-point flexural rigidity tests in order to find out ways of stabilization and enhancement of bonding strength between metal and porcelain. AVOVA, surface component observation experiment by SAM/EDS, and Tukey's HSAD posteriori tests results are as follows: First, The bonding strength in all groups has exceeded the minimum (25MPa) of ISO9693 bonding strength regulation for dental mental-porcelain specimen. Second, The bonding strength of Group V1 was $32.37{\pm}1.91MPa$, $38.25{\pm}1.38MPa$ in Group V2, $46.43{\pm}2.14MPa$ in Group V3 and $47.21{\pm}1.72MPa$ Group V4. The difference has been statistically meaningful. Tukey's HSAD posteriori tests results have shown that the bonding strength in Group V4 was higher than that of Group V1. Third, the bonding strength between metal and porcelain without degassing process was higher than that of with degassing process, and the bonding strength of powder opaque was higher than that of paste opaque. Fourth, Group V4 has ranked the highest on the comparison table of metal and porcelain bonding strength.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.97-105
• /
• 1996

For the minimum weight design of ship structures it is desirable that tank arrangement is predetermined to obtain the minimum weight and then structural arrangement and scanting of each murder is determined to obtain the minimum weight within the given tank arrangement. To carry out the tank arrangement to give minimum weight a minimum weight design program which covers whole ship structures is developed by the combination of minimum weight design program of longitudinal members by classification rules and minimum weight design program of transverse members by generalized slope deflection method which were developed by the authors. The hullweight is estimated by summation of the weight of cargo hold part and the weight except cargo hold part which can be estimated by the empirical formula. In this study, the variation of hullweight is shown with the number of tank, the number of web and the location of longitudinal bulkhead. For the application of actual design alternative designs of tank arrangement which satisfy MARPOL regulation are determined. And several minimum weight designs of whole ship structures are carried out to obtain the tank arrangement which gives minimum weight and then the hullweight is compared with that of existing ship.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.3
• /
• pp.22-28
• /
• 2008

It proposes the novel design conditions to maximize the power coupling of active directional couplers with mismatched access guides. To verify the validity and accuracy of the conditions proposed, a new coupling efficiency is defined and it depends on the reflection coefficients occurred at the discontinuous input/output interfaces. The numerical results reveal that the phase-matched condition and the minimum-gap condition for those couplers are no longer suitable to optimize the design parameters and a new criterion is needed.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.120-126
• /
• 2006

A grating-assisted fiber coupler(GAFC), which consists of a thin-film waveguide with grating and circular optical fiber, is proposed and the optimized power coupling is evaluated by using a technique amenable to rigorous longitudinal modal transmission-line theory(L-MTLT). In addition, novel criteria to couple an optical signal incident through the grating waveguide to a single-mode optical fiber are proposed. The numerical result reveals that the optimized power coupling occurs at minimum-gap condition between rigorous modes rather than for the conventional phase-matching condition.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.6
• /
• pp.83-92
• /
• 2012

This paper suggests an improved method of grouping minterms based on the Decimal-Valued Matrix (DVM) method. The DVM is a novel approach to Boolean logic minimization method which was recently developed by this author. Using the minterm-based matrix layout, the method captures binary number based minterm differences in decimal number form. As a result, combinable minterms can be visually identified. Furthermore, they can be systematically processed in finding a minimized Boolean expression. Although this new matrix based approach is visual-based, the suggested method in symmetric grouping cell values can become rather messy in some cases. To alleviate this problem, the enhanced DVM method that is based on multi-level groupings of combinable minterms is presented in this paper. Overall, since the method described here provides a concise visualization of minterm groupings, it facilitates a user with more options to explore different combinable minterm groups for a given Boolean logic minimization problem.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.5
• /
• pp.44-51
• /
• 2015

The deployment of high capacity backhaul is required due to explosive growth in mobile data services. For rapid backhaul deployment, point to point microwave is a much easier and cheaper technology. The space diversity scheme is used in point to point microwave links. The purpose of space diversity is to overcome fading by combining signals from two separate receiver antennas. For signal combining algorithm, maximum power and minimum distortion methods were used and these algorithms were reported not to be good enough for robustness in selective fading. In this paper, a more practically efficient signal combining scheme from the main and diversity branch is proposed and evaluated in selective fading channel. The proposed algorithm has shown significant performance improvement in terms of signal spectrum.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.487-493
• /
• 1999

In this paper, we studied the characteristics of a soliton coupler using a bent nonlinear waveguide. The bent soliton coupler has very ,harp switching characteristic like the conventional soliton coupler due to the threshold effect of soliton emi,sion from the nonlinear waveguide. By using the bent structure, we can reduce the threshold power for the soliton emission. We consider the saturation effect of nonlinearity and the loss in the medium for more accurate and practical numerical analysis in wave propagation through the bent soliton coupler. The simulation results show that the consideration of the saturation effect and the ]os~ may be very important in the analyses and design of the nonlinear waveguide devices. The bent structure is useful for the emission of the spatial soliton with the low threshold power, when we consider the saturation and the loss effect. ffect.