• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.591-598
• /
• 2021

The digital phase-locked loops(DPLL) is a circuit used for phase synchronization and has been generally used in various fields such as communication and circuit fields. State estimators are used to design digital phase-locked loops, and infinite impulse response state estimators such as the well-known Kalman filter have been used. In general, the performance of the infinite impulse response state estimator-based digital phase-locked loop is excellent, but a sudden performance degradation may occur in unexpected situations such as inaccuracy of initial value, model error, and disturbance. In this paper, we propose a minimum variance finite impulse response filter with optimal horizon for designing a new digital phase-locked loop. A numerical method is introduced to obtain the measured value interval length, which is an important parameter of the proposed finite impulse response filter, and to obtain a gain, the covariance matrix of the error is set as a cost function, and a linear matrix inequality is used to minimize it. In order to verify the superiority and robustness of the proposed digital phase-locked loop, a simulation was performed for comparison and analysis with the existing method in a situation where noise information was inaccurate.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.4
• /
• pp.264-274
• /
• 2003

This paper presents a direct generalized minimum-variance self tuning controller with a PID structure using neural network which adapts to the changing parameters of the nonlinear system with nonminimum phase behavior, noises and time delays. The self-tuning controller with a PID structure is a combination of the simple structure of a PID controller and the characteristics of a self-tuning controller that can adapt to changes in the environment. The self-tuning control effect is achieved through the RLS (recursive least square) algorithm at the parameter estimation stage as well as through the Robbins-Monro algorithm at the stage of optimizing the design parameter of the controller. The neural network control effect which compensates for nonlinear factor is obtained from the learning algorithm which the learning error between the filtered reference and the auxiliary output of plant becomes zero. Computer simulation has shown that the proposed method works effectively on the nonlinear nonminimum phase system with time delays and changed system parameter.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.823-826
• /
• 2005

본 논문에서는 얼굴 영상으로부터 얼굴인식을 위한 눈동자를 검출하기 위한 방법을 제안하고자 한다. 제안된 방법은 분리 필터를 사용하여 홍채의 후보가 되는 영역을 구한 후 양자를 잇는 선분의 길이 및 기울기의 허용치 안에 있는 모든 영역에 대해 본 논문에서 제안한 방식으로 그 값을 계산한다. 이 값은 영역의 근방영역에서 홍채의 경계선에 대응하는 원을 허프변환으로 구했을 때 후보 영역의 원에서의 후보 영역과 인접하면서 분리된 영역 내의 평균 휘도 값 및 영역을 포함한 부분화상과 눈의 템프릿 사이의 정규화된 상관계수를 사용하여 계산된다. 그리고 그 값을 최소로 하는 영역들을 택하여 이것을 양눈의 홍채로 검출한다. 안경을 쓰지 않은 총 150장의 얼굴영상을 사용하여 실험한 결과 최대 97.3%, 최소 95.3%의 성공률을 얻을 수 있었으며, 약간의 오차를 허용한 경우에는 최대 99.3%, 최소 96.7%의 성공률을 얻을 수 있었다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.1-9
• /
• 1989

In binary digital transmission system the band-limiting is required for the better transmission efficiency. But in the case of band-limiting the intersymbol-interference (ISI) usually takes place. In this paper, in an attempt to design band-limiting filter which has minimum ISI and maximum stop-band loss, first, making use of analog filter by combining Binary Transversal Filter (BTF) and analog filter (4th Butterworhfilter), we found the value that minimizes ISI phenomenon by getting step response of rectangular pulse resulting from BTF in time domain. Second, we found filter characteristic we want to in frequency domain for band-limiting and minimized the error. And then we obtained resistor value (Tap coefficient) in order to design algorithm for optimum filter. Also we showed the example of simulation in case we established the resistors with 3,5 and 7 respectively. With 7 resistors set, we identified that the ripple of about minus 30dB was taken place.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1926-1933
• /
• 2022

Parameterized multichannel Wiener filter (PMWF) is a linear filter that can control the trade-off between residual noise and signal distortion using the embedded parameter. To apply the PMWF to noisy inputs, accurate noise estimation is important and multichannel minima-controlled recursive averaging (MMCRA) is widely used. However, in the case of the MMCRA, the accuracy of noise estimation decreases when a directional interference is involved into the array inputs. Consequently, the performance of the PMWF is degraded. Therefore, we propose a noise power spectral density (PSD) estimation method for the PMWF in this paper. The proposed method is based on a consecutive process of eigenvalue decomposition on noisy input PSD, estimation of the target component contribution using directional information, and exponential weighting for improved estimation of the target contribution. For evaluation, four objective measures were compared with the MMCRA and we verify that the PMWF with the proposed noise estimation method can improve performance in environments where directional interfereces exist.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.19-25
• /
• 2005

Nowadays, it is possible to construct the DEMs of urban area effectively and economically by LiDAR system. But the data from LiDAR system has form of DSM which is included various objects as trees and buildings. So the preprocess is necessary to extract the DEMs from LiDAR DSMs for particular purpose as effects analysis of man-made objects for flood prediction. As this study is for extracting DEM from LiDAR DSM of urban area, we detected the edges of various objects using edge detecting algorithm of image process. And, we tried mean value filtering, median value filtering and minimum value filtering or detected edges instead of interpolation method which is used in the previous study and could be modified the source data. it could minimize the modification of source data, and the extracting process of DEMs from DSMs could be simplified and automated.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.4 s.310
• /
• pp.113-122
• /
• 2006

In this paper, we propose a fuzzy method to control bit-rate in the DCT Domain. The method consists of a bit-rate allocation with fuzzy measures and a least-distortion bit-rate reduction. Fuzzy measures are calculated by the code length, the discontinuity ambiguity, and the neighborhood momentum in each DCT block. These measures are summed with weights and form a reduction fuzziness to indicate the degree of preferable reduction. Using the reduction fuzziness. each DCT block is filtered by the least-distortion reduction method to adjust the bit-rate for the target bandwidth. In the experiment, we show the results that the transcoded video quality by the method is better and the bandwidth is more regular than those of existing methods in both visually and quantitatively.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.2
• /
• pp.3-11
• /
• 2010

In this paper we propose a new algorithm to detect the irises of both eyes from a human face. Using the separability filter, the algorithm first extracts blobs(intensity valleys) as the candidates for the irises. Next, for each pair of blobs, the algorithm computes a cost using Hough transform and separability filter to measure the fit of the pair of blobs to the image. And then, the algorithm selects a pair of blobs with the smallest cost as the irises of both eyes. As the result of the experiment using 150 faces images without spectacles, the success rate of the proposed algorithm was 97.3% for the best case and 95.3% for the worst case.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.526-534
• /
• 2006

In this paper we propose a new algorithm to detect the irises of both eyes from a human face. Using the separability filter, the algorithm first extracts blobs(intensity valleys) as the candidates for the irises. Next, for each pair of blobs. the algorithm computes a cost usings Hough transform and separability later to measure the fit of the pair of blobs to the image. And then, the algorithm selects a pair of blobs with the smallest cost as the irises of both eyes. As the result of the experiment using 150 faces images without spectacles, the success rate of the proposed algorithm was 97.3% for the best case and 95.3% for the worst case.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.10
• /
• pp.1109-1116
• /
• 1992

Mathematical morphology, theoretical foundation for morphological filter, is very efficient for the analysis of the geometrical characteristics of signals and systems and is used as a predominant tool for smoothing the data with noise. In this study, H/W design of morphological filter is implemented to process the gray scale dilation and the erosion in the same circuit and to choose the maximum and minimum value by a selector, resulting in their education of the complexity of the circuit and an architecture for parallel processing. The structure of morphological filter consists of the structuring-element block, the image data block, the control block, the ADD block, the MIN/MAX block, etc, and is designed on an one-chip for real time operation.