• Title/Summary/Keyword: 최대 차수

Search Result 160, Processing Time 0.03 seconds

A study on the optimal reinforced zone of a small sectional shield TBM tunnel in difficult ground (특수지반 구간의 소단면 쉴드 TBM 터널 굴착 시 최적 보강영역 연구)

  • Kang, Byung-Yun;Park, Hyung-Keun;Cha, Jae-Hoon;Kim, Young-Jin
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.21 no.6
    • /
    • pp.735-747
    • /
    • 2019
  • Due to the lack of ground space by urbanization, the demand of utility tunnels for laying social facilities is increasing. During the construction of a utility tunnel in downtown area using a shield TBM, various problems may occur when difficult ground is encountered such as mixed ground and cobbly ground. Thus, in this study, using MIDAS GTS NX (Ver. 280), a numerical analysis was performed on characteristics of difficult ground, reinforced area, depth of cover and groundwater level to analyze the optimal ground reinforced area according to combination of parameters. As a result, it was difficult to secure stability in unconstrained excavation cases on both the mixed ground and the cobbly ground. However, when ground reinforcement grouting as much as 2.0D is applied, convergence occurred within the allowable limit, except for mixed ground with a depth of cover 30 m. In addition, excessive leakage occurred during excavation of both the mixed ground and the cobbly layers. It was able to secure stability after applying waterproof grouting.

Study on the Pyrolysis Kinetics of RDF(Refuse Derived Fuel) with Thermogravimetric Analysis (열중량 분석 기법을 통한 RDF의 열분해 특성 조사)

  • Kim, Dong-Won;Lee, Jong-Min;Kim, Jae-Sung
    • Korean Chemical Engineering Research
    • /
    • v.47 no.6
    • /
    • pp.676-682
    • /
    • 2009
  • Devolatilization of the Refuse Derived Fuel(RDF) which is produced at WonJu in Korea was characterized in air atmosphere with variation of heating rate(10, 20 and $30^{\circ}C/min$) in TGA. The results of TG Analysis have shown that the pyrolysis and char combustion of the RDF occurred in the range of $350{\sim}700^{\circ}C$ depending on the heating rate. Activation energy of the RDF which was determined by using Friedman and Ozawa-Flynn-Wall method was in the range of 14.44~18.40 kcal/mol. Also, reaction order(n) and pre-exponential factors(A) were 1.219 and $3.02{\times}10^5$ by using Friedman method, respectively. In order to find out the devolatilization mechanism of the RDF, twelve solid-state mechanisms defined by Coats Redfern Method were tested. The results of the Coats Redfern Method have shown that chemical reaction is the effective mechanism by comparison with the value of the activation energy which was derived from the Friedman and Flynn-Wall-Ozawa method and correlation coefficient from twelve solid-state mechanisms of Coats Redfern Method. The solid state decomposition mechanism of the RDF was found to be a decelerated $F_1$ type, random nucleation with one nucleus on the individual particle.

Extracting Silhouettes of a Polyhedral Model from a Curved Viewpoint Trajectory (곡선 궤적의 이동 관측점에 대한 다면체 모델의 윤곽선 추출)

  • Kim, Gu-Jin;Baek, Nak-Hun
    • Journal of the Korea Computer Graphics Society
    • /
    • v.8 no.2
    • /
    • pp.1-7
    • /
    • 2002
  • The fast extraction of the silhouettes of a model is very useful for many applications in computer graphics and animation. In this paper, we present an efficient algorithm to compute a sequence of perspective silhouettes for a polyhedral model from a moving viewpoint. The viewpoint is assumed to move along a trajectory q(t), which is a space curve of a time parameter t. Then, we can compute the time-intervals for each edge of the model to be contained in the silhouette by two major computations: (i) intersecting q(t) with two planes and (ii) a number of dot products. If q(t) is a curve of degree n, then there are at most of n + 1 time-intervals for an edge to be in a silhouette. For each time point $t_i$ we can extract silhouette edges by searching the intervals containing $t_i$ among the computed intervals. For the efficient search, we propose two kinds of data structures for storing the intervals: an interval tree and an array. Our algorithm can be easily extended to compute the parallel silhouettes with minor modifications.

  • PDF

Preparation of $BaSO_{4}$ : Eu-PTFE TLD Radiation Sensor and Its Physical Characterstics ($BaSO_{4}$ : Eu-PTFE TLD 방사선 센서의 제작과 물리적 특성)

  • U, Hong;Kim, S.H.;Lee, S.Y.;Kang, H.D.;Kim, D.S.
    • Journal of Sensor Science and Technology
    • /
    • v.1 no.1
    • /
    • pp.59-66
    • /
    • 1992
  • To develop the highly sensitive TLD radiation sensors, $BaSO_{4}$ : Eu-PTFE TLDs are fabricated by polymerizing the PTFE(polytetrafluoroethylene) with $BaSO_{4}$ : Eu TL phosphors. The $BaSO_{4}$ : Eu TL phosphors having the highest sensitivity of $X/{\gamma}$-rays are obtained by sintering at $1000^{\circ}C$ in $N_{2}$ atmosphere a mixture of $BaSO_{4}$ powder with 1mol% Eu($Eu_{2}O_{3}$), 6mol% $NH_{4}Cl$ and 5mol% $(NH_{4})_{2}SO_{4}$ which were co-precipitated in dilute sulfuric acid and then dried. The activation energy, frequency factor and kinetic order of $BaSO_{4}$ : Eu TL phosphor are 1.17eV, $3.6{\times}10^{11}/sec$ and 1.25, respectively. And the spectral peak of $BaSO_{4}$ : Eu is about 425nm. The optimum TL Phosphor content and thickness of the $BaSO_{4}$ : Eu-PTFE TLD are 40wt% and $105.7mg/cm^{2}$. The optimum polymerization temperature and time for fabrication of $BaSO_{4}$ : Eu-PTFE TLDs are $380^{\circ}C$ and 2 hours in air, respectively. The linear dose range to ${\gamma}$ rays is 0.01-20Gy and fading rate is about 10%/60hours.

  • PDF

균열 암반 대수층 활용 지하수 인공 함양 주입 예비 평가

  • 김형수;백건하;윤윤영;한정상
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2004.09a
    • /
    • pp.108-112
    • /
    • 2004
  • 균열 암반 대수층에 대한 지하수 인공 함양 주입 가능성을 예비적으로 평가하기 위한 시험을 수행하였다. 지하수 인공 함양 주입 시험이 수행된 지역은 경기도 포천군 이동면이며, 이 지역의 지질은 중립내지 조립질 화강암에 해당된다. 시험 정호에 대한 시추공 내부 촬영 결과, 화강암 내에 부분적으로 절리들이 발달되어 있었으며, 대체로 수직적인 절리 발달이 우세하였다. 2개소에서 인공 함양 주입 시험이 100kgf/$\textrm{cm}^2$ 이상의 확장 팩커로 대상공의 상부를 밀폐한 후 시행되었다. 이중 MW-7호 공에서는, 주입 압력을 5 내지 7kg/$\textrm{cm}^2$으로 조절하여 시간당 약 450$\ell$의 평균 주입률로 시험을 수행하였으며, O-7a 호 공에서는 주입 압력을 4kgf/$\textrm{cm}^2$ 내외, 시간당 약 1,740$\ell$의 평균 주입률로 시험을 수행하였다. MW-7호 공의 시험은 3일간 3회에 걸쳐 각 450분, 200분, 414분 동안 시험이 수행되었으며, O-7a호 공에서는 연속적으로 24시간 동안 인공 함양 주입 시험이 수행되었다. 수행된 지하수 인공 함양 주입시험은 적어도 지하수 상류 구배 구간의 지하 수두를 시험이 수행된 이후에도 24시간 이상 유지하는 것으로 평가되었다. 실험을 통해 주입한 양과 주변 관측공의 수위 상승을 단순 검토한 결과 시험이 수행된 지역의 개략적 유효 공극률을 산정 할 수 있었으며, 그 결과, 이 지역 균열 암반의 유효 공극률은 약 3 내지 6% 인 것으로 평가되었다 국내에서 지하수 인공 함양 방식을 균열 암반 대수층에 활용하여, 지속적인 수자원 관리와 수도 공급을 할 수 있는지를 평가하기 위해서는 앞으로 보다 많은 시험수행과 연구를 통한 검증이 요구된다. 까마중, 냉이, 명아주, 둑새풀 등의 생장에 현저한 조해현상을 나타냈다. 이것으로 보아 억새가 타식물의 생장에 영향을 주는 요인물질은 억새의 뿌리에서 분필되는 것으로 생각된다. 옥수수의 뿌리에서 직접 분필하는 물질이나 옥수수뿌리의 분해물질들은 모두 당귀의 생장을 조해하는 경향이 있었다.기존에 제안된 경험식들에 의한 계산결과 보다 균질화 해석법의 결과가 훨씬 정확함을 주목하여야 한다.c의 범위로서 최대값과 최소값은 4차수(four order)의 차이를 보였다. 단열대의 분포 특성을 파악하기 위하여 지구물리검층을 실시하였고, 각 시험에 의해 획득된 결과들과의 비교를 통하여 유동성이 높은 단열들이 규명되었다. 온도검층은 유동성 단열과 일반적인 단열들을 구별하는 좋은 지시자로 나타났다. 그 결과, N70-80$^{\circ}$W.60-85$^{\circ}$NE/SW, N75-80$^{\circ}$W.25-30$^{\circ}$SW, N50-64$^{\circ}$W.60-85$^{\circ}$NE, N35-45$^{\circ}$E.65-75$^{\circ}$SE, 그리고 N65-72$^{\circ}$E.80$^{\circ}$SE/60$^{\circ}$NW의 단열들이 연구지역의 지하수 흐름을 지배하는 뚜렷한 유동성 단열로 규명되었다.eatments. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9% increase in index, as compared to that of c

  • PDF

Disproof of Hadwiger Conjecture (Hadwiger 추측의 반증)

  • Lee, Sang-Un
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.14 no.5
    • /
    • pp.263-269
    • /
    • 2014
  • In this paper, I disprove Hadwiger conjecture of the vertex coloring problem, which asserts that "All $K_k$-minor free graphs can be colored with k-1 number of colors, i.e., ${\chi}(G)=k$ given $K_k$-minor." Pursuant to Hadwiger conjecture, one shall obtain an NP-complete k-minor to determine ${\chi}(G)=k$, and solve another NP-complete vertex coloring problem as a means to color vertices. In order to disprove Hadwiger conjecture in this paper, I propose an algorithm of linear time complexity O(V) that yields the exact solution to the vertex coloring problem. The proposed algorithm assigns vertex with the minimum degree to the Maximum Independent Set (MIS) and repeats this process on a simplified graph derived by deleting adjacent edges to the MIS vertex so as to finally obtain an MIS with a single color. Next, it repeats the process on a simplified graph derived by deleting edges of the MIS vertex to obtain an MIS whose number of vertex color corresponds to ${\chi}(G)=k$. Also presented in this paper using the proposed algorithm is an additional algorithm that searches solution of ${\chi}^{{\prime}{\prime}}(G)$, the total chromatic number, which also remains NP-complete. When applied to a $K_4$-minor graph, the proposed algorithm has obtained ${\chi}(G)=3$ instead of ${\chi}(G)=4$, proving that the Hadwiger conjecture is not universally applicable to all the graphs. The proposed algorithm, however, is a simple algorithm that directly obtains an independent set minor of ${\chi}(G)=k$ to assign an equal color to the vertices of each independent set without having to determine minors in the first place.

Evaluation of Flexural Behavior of Hollow Prestressed Concrete Pile for Continuous Pile Wall (주열식 벽체용 중공 프리스트레스트 콘크리트 파일의 휨거동 평가)

  • Lee, Young-Geun;Jang, Min-Jun;Yoon, Soon-Jong
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.18 no.3
    • /
    • pp.20-27
    • /
    • 2014
  • In the construction site, various earth retaining systems are developed and applied to maintain stability of excavated area and structures. Among the methods, the underground continuous wall and the column-type diaphragm wall methods are especially used in construction site nearby buildings or roads. However, these methods have some disadvantages such as the difficulty of quality control and long curing time because these methods need to cast fresh concrete at the construction site. In addition, these methods are usually applied to the site for the temporary purpose. In this paper, we suggest precast hollow prestressed concrete pile for continuous pile wall system. To investigate the structural behavior of suggested pile, which is the main member of the suggested system, tests pertaining to the structural behavior and prestressing force applied in the pile are conducted. From the test results, it was found that the prestressing force measured is sufficient compared with the value obtained by the design equation and the cracking moment measured is 34% higher than the design value. In addition to the above, this precast hollow prestressed concrete pile has an additional safety margin that the maximum moment is 59.2% higher than the cracking moment which is one of the serviceability limits for the design of the system.

A Polynomial Time Algorithm for Vertex Coloring Problem (정점 색칠 문제의 다항시간 알고리즘)

  • Lee, Sang-Un;Choi, Myeong-Bok
    • Journal of the Korea Society of Computer and Information
    • /
    • v.16 no.7
    • /
    • pp.85-93
    • /
    • 2011
  • The Vertex Coloring Problem hasn't been solved in polynomial time, so this problem has been known as NP-complete. This paper suggests linear time algorithm for Vertex Coloring Problem (VCP). The proposed algorithm is based on assumption that we can't know a priori the minimum chromatic number ${\chi}(G)$=k for graph G=(V,E) This algorithm divides Vertices V of graph into two parts as independent sets $\overline{C}$ and cover set C, then assigns the color to $\overline{C}$. The element of independent sets $\overline{C}$ is a vertex ${\upsilon}$ that has minimum degree ${\delta}(G)$ and the elements of cover set C are the vertices ${\upsilon}$ that is adjacent to ${\upsilon}$. The reduced graph is divided into independent sets $\overline{C}$ and cover set C again until no edge is in a cover set C. As a result of experiments, this algorithm finds the ${\chi}(G)$=k perfectly for 26 Graphs that shows the number of selecting ${\upsilon}$ is less than the number of vertices n.

Development of Precise Geoid Model in Jeju Island (제주도 지역의 정밀지오이드 모델 개발)

  • Lee, Dong-Ha;We, Gwang-Jae;Huang, He;Yun, Hong-Sic
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.26 no.1
    • /
    • pp.51-61
    • /
    • 2008
  • The determination of precise geoid model for the Jeju island is needed to minimize the effect of different vertical datums. This study describes the development of gravimetric geoid model referred to GRS80 reference surface for the area of Jeju island. We used ECM96 up to degree and order 360 as a reference model and added the terrain and the residual gravity effects to the reference model. After then 17 GPS/Levelling data were used to correct the difference between the GPS/Levelling-derived geoid heights and gravimetric geoid heights. The least square collocation was applied to derive the correction and the grid values. The final precise geoid model(Jeju_GEOID07) that consist of $0.75'{\times}1'$(about $1.4km{\times}1.5km)$ grid interval was obtained in the region of $33^{\circ}{\sim}33.8^{\circ}N$ and $125.8^{\circ}{\sim}127.2^{\circ}E$. Concerning this works, the precise geoid for the Korean peninsula should be determined by integrating the different geoid developed for the peninsula and Jeju island. It is also need to integrate the vertical datum using long-term tide and GPS observations.

Monitoring Vegetation Phenology Using MODIS in Northern Plateau Region, North Korea (MODIS자료를 이용한 북한 개마고원 및 백무고원 식생의 생물계절 모니터링)

  • Cha, Su-Young;Seo, Dong-Jo;Park, Chong-Hwa
    • Korean Journal of Remote Sensing
    • /
    • v.25 no.5
    • /
    • pp.399-409
    • /
    • 2009
  • Many researches have shown that NDVI provides a potential methods to derive meaningful metrics that describe ecosystem functions. In this paper we investigated the use of the MODIS NDVI (Normalized Difference Vegetation Index) to monitor vegetation phenology dynamics of Northern plateau region, North Korea, during last 9-years (2000~2008). The findings of this paper can be summarized as follows. First, the length of growing season ranged from a low of 128 days in 2003 to a high of 176 days in 2000 and 2005. On the average of the last 9 years, the highest NDVI of 0.86 was marked on 28 July. Greenup onset occurs at the start of May, while the senescence begins between late September and October. Second, these annual vegetation cycles were compared with Seorak and Jiri Mountain regions of South Korea which have similar vegetation condition. Greenup onsets in South Korea were observed earlier than those of North Korea and the average time lag between the South and North Korea in Greenup was about 16 days which is a time-resolution of remotely sensed data. Sub-alpine conifers of such areas may be severely affected by the large of phenological characteristics due to the global warming trend.