• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.112-114
• /
• 2020

기존 위상천이 풀브리지 컨버터는 입력전압 범위가 넓을 경우, 제어변수인 듀티의 변동이 크게 되어 큰 순환전류가 존재하고, 2차측 정류단 전압스트레스가 커지는 문제가 있다. 이러한 문제점을 해결하기 위해 본 논문에서는 위상천이 방식을 적용한 3-레그 인버터 타입의 절연형 컨버터를 제안한다. 제안회로는 턴 비의 변화로 입력전압에 상관없이 항상 최대 듀티로 동작하며, 1차측 전류 및 2차측 정류단 전압스트레스를 감소시킬 수 있다. 제안 회로의 타당성을 검증하기 위해, 입력 311V_DC/622V_DC, 출력 50V 6kW급 사양의 프로토타입 컨버터를 설계·제작하였고, 그 실험 결과를 발표한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.12
• /
• pp.1-7
• /
• 2001

Single-layer polymer green electroluminescent devices were fabricated with novel material synthesis by using moleculely-dispersed TTA and NIDI into the polymer PC(B79) emitter layer doped with C6 fluorescent dye which has low operating voltage and high quantum efficiency. A EL cell structure of glass substrate/indium-tin-oxide/PC:TTA:NIDI:C6/Ca/Al was employed and compared with various low work function cathode electrodes Ca and Mg metals. By adjusting the concentration of the fluorescent dye C6, low turn-on voltage of 2.4V was obtained, maximum quantum efficiency of 0.52% at 0.08mole% has been improved by about a factor of ~50 times in comparison with the undoped cell. The PL and EL colors can't be turned by changing the concentration of the C6 dopant. PL emission peaking was obtained at 495nm and EL emission peaking at 520nm with FWHM ~70nm

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.16-23
• /
• 2018

Alternative technologies for sludge treatment and disposal need to be developed urgently because the amount of produced production has increased continuously. In this study, Pulsed Electric Fields (PEF) technique was applied for sludge solubilization and the performance was evaluated. The PEF equipped with electrodes coated by epoxy resin and teflon was inducted to the activated sludge suspension, and the effect of the coating materials on the solubilization was determined. In addition, the effect of the applied voltage on the solubilization yield was investigated as the applied voltage was increased from 6 to 12 and 15 kV. Sludge solubilization was not observed when the epoxy-coated electrode was used for PEF induction regardless of the applied voltage. However, sludge solubilization occurred when 12 and 15 kV were applied to the teflon-coated electrodes. The MLSS decreased to 9%, and the soluble-COD increased to 496% when the applied voltage was 15 kV. But sludge solubilization did not happen under 6 kV condition. The corona discharge was observed at applied voltages of 12 and 15 kV, (Ed- sorry but I cannot understand the following highlight) but if 6 kV, strongly indicating that the corona discharge make the sludge solubilized, which suggests that the critical voltage for sludge solubilization lies between 6 and 12 kV. Consequently, proper selection of electrode-coating materials and the applied voltage of PEF could lead to sludge solubilization by corona discharge.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.262-264
• /
• 2009

일반적으로, 단위 배터리간의 직/병렬 연결을 통해 구성되는 팩은 이를 구성하는 각 배터리간의 상이한 전기화학적 특성으로 인해 전압 불균형이 존재한다. 이러한 전압 불균형은 팩의 노화 및 성능을 저하시키는 원인이 된다. 이러한 전압불균형을 없애기 위해 전압과 State of Charge(SOC)를 이용한 밸런싱 회로가 폭넓게 연구되고 있다. 하지만, 이러한 연구는 대체적으로, 다른 특성을 가지는 단위 배터리로 구성되는 팩의 밸런싱 방법이다. 따라서, 동일하고 균일한 특성을 갖는 배터리들을 미리 선별하여 팩을 구성한다면, 밸런싱의 전반적인 효율증대가 기대된다. 본 논문에서는 최적의 전압 밸런싱을 위한 스크리닝(Screening)의 새로운 방법을 연구하였다. 용량과 모델 파라미터(Lumped resistance;$R_{Diff}$)를 스크리닝의 척도로 고려하였고, 전압 불균형을 최대한 줄이기 위해 용량, 모델 파라미터의 순으로 스크리닝을 진행하였다. 또한, 전압패턴인식을 이용한 판별법을 통해 제안된 스크리닝 방법을 검증하였다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.11
• /
• pp.601-610
• /
• 2002

Intra-task voltage scheduling (IntraVS), which adjusts the supply voltage within an individual task boundary, is an effective technique for developing low-power applications. In this paper, we propose a novel intra-task voltage scheduling algorithm for hard real-time applications based on average-case execution time. Unlike the conventional IntraVS algorithm where voltage scaling decisions are based on the worst-case execution cycles, tile proposed algorithm improves the energy efficiency by controlling the execution speed based on average-case execution cycles while meeting the real-time constraints. The experimental results using an MPEG-4 decoder program show that the proposed algorithm reduces the energy consumption by up to 34% over conventional IntraVS algorithm.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.31-39
• /
• 2012

In this paper, we propose a microprocessor-based automatic voltage regulator(AVR) to reduce consumers' electric energy consumption and to help controlling peak demanding power. Hybrid Switching Automatic Voltage Regulator (HS-AVR) consist of a toroidal core, several tap control switches, display and command control parts. The coil forms an autotransformer which has a serial main winding and four parallel auxiliary windings. It controls the output voltage by changing the combination of the coils and the switches. Relays are adopted as the link switches of the coils to minimize the loss. To make connecting and disconnecting time accurate, relays of the circuit have parallel TRIACs. A software phase locked loop(PLL) has been used to synchronize the timings of the switches to the voltage waveform. The software PLL informs the input voltage zero-crossing and positive/negative peak timing. The traditional voltage transformers and AVRs have a disadvantage of having a large mandatory capacity to accommodate maximum inrush current to avoid the switch contact damage. But we propose a suitable AVR for every purpose in smart grid with reduced size and increased efficiency.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.417-418
• /
• 2013

태양광 발전설비에서 태양광 셀의 출력전력을 최대로 부하에 전달하기 위해 태양광 최대전력추종제어를 한다. 일반적인 태양광 최대전력 추종제어는 태양광 셀의 전압과 전류의 곱인 전력값을 비교하여 최대전력추종제어를 한다. 본 논문에서는 MPPT 컨버터의 출력 파라미터 중 전류만을 센싱하여 태양광 최대전력추종제어를 한다. 또한 태양광 최대 전력추종제어를 통해 최대 출력으로 배터리를 충전하고 허용전류를 초과했을 때에는 전류제어로 충전하도록 설계한다. 이를 통해 Solar Car등과 같은 모터 부하에 적용해 보고자 한다.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1785-1787
• /
• 2002

폐수에서 발생하는 슬러지(Sluge)의 효과적인 처리를 위한 전기적 충격파를 발생시키는 장치로 고전압 펄스 전원 시스템을 제작하였다. 제작한 고전압 펄스 전원 시스템의 제원은 최대 출력 전압 60 kV, 최대 반복 주파수 500 Hz 이며, 한 펄스 당 최대 출력 에너지는 20 J 이다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.383-384
• /
• 2020

본 논문에서는 고승압이 가능한 2-Stage Boost 컨버터의 최대효율 운전을 위한 손실 분석을 수행한다. 2-Stage Boost 컨버터의 최대효율 지점 추정을 위해 앞단 Boost 컨버터의 출력 전압인 V_mid의 변동에 따른 2-Stage Boost 컨버터의 상세한 손실을 분석하며, 손실이 가장 적은 V_mid지점을 도출하였으며 실험을 통해 검증한다.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1140-1149
• /
• 2019

In general, there are various pulse width modulation(PWM) methods simply using the offset voltage injection in voltage source converter(VSC). In accordance with the AC side voltage synthesis method with the offset voltage, DC side voltage utilization factor in VSC is changed. Also, this can apply equally to the MMC system. In other words, if the DC side capacity of the high voltage DC(HVDC) transmission system is determined, the maximum reactive power which can be supplied to the AC side can be changed according to the applied output voltage synthesis method with the offset voltage. In this paper, the leg energy pulsation in MMC system according to the AC side output voltage synthesis method with offset voltage which several representative PWM are applied to are mathematically analyzed and compared with each other. Finally, the above results are verified by simulation emulating the 400MVA full-scale MMC system to determine the consistency of the mathematical analysis.