• Journal of Korea Water Resources Association
• /
• v.46 no.12
• /
• pp.1181-1191
• /
• 2013

This study have implemented finding the optimal water temperature parameter set for Hapcheon dam reservoir using CE-QUAL-W2 model. In particular the sensitivity analysis was carried out for four water temperature parameters of wind sheltering coefficient (WSC), radiation heat coefficient (BETA), light extinction coefficient (EXH2O), heat exchange coefficient at the channel bed (CBHE). Firstly, WSC, BETA, EXH2O shows relatively high sensitivity in common during April to September, and CBHE does during August to November. Secondly, as a result of identifying depth range of parameter influence, BETA and EXH2O show 0~9 m and 8~14 m which is thermocline layer close to water surface, CBHE is deep layer 12 m away from bottom. Finally, applying annual or monthly optimal parameter sets indicates that the bias between two sets does not show much differences for WSC and CBHE parameters, but BETA and EXH2O parameters show $0.20^{\circ}C$ and $0.51^{\circ}C$ of monthly average biases for two parameter sets. In particular the bias reveals to be $0.4^{\circ}C$ and $1.09^{\circ}C$ during May and August that confirms the necessity of use of monthly parameters during that season. It is claimed that the current operational custom use of annual parameters in calibration of reservoir water quality model requires the improvement of using monthly parameters.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.471-490
• /
• 2016

This study investigated provenance of raw materials and making technique of lime-based materials used in the tomb barriers of the Yesan Mokri tombs from Joseon dynasty on the basis of analysis to material characteristics and physical properties. In the barrier materials, dry density and porosity are the highest value ($1.82g/cm^3$) and the lowest value (25.20%) in the south wall of No. 1 tomb, respectively. Dry density and porosity are inversely proportional in all barrier materials, but unconfined compressive strength, which is the highest value of $182.36kg/cm^2$ in the No. 2 tomb, does not show an interrelation with porosity and density. Mineral components in the lime-soil mixtures of the tomb barrier are mainly quartz, feldspar, mica and calcite about 200 to $600{\mu}m$ size with yellowish brown matrix. Hydrotalcite and portlandite are detected in the lime mixture, and kaolinite in the soils. The lime materials of the tomb barrier occurred in large quantities weight loss and variable endothermic peaks caused by decarbonization reaction of $CaCO_3$ in the range from 600 to $800^{\circ}C$ in thermal analysis. Making temperature of lime for the tomb barrier is presumed approximately about $800^{\circ}C$ based on the occurrences, compositions and thermal analysis. The tomb barriers are revealed to very wide composition ranges of major elements and loss-on-ignition (22.5 to 33.6 wt.%) owing to mixture of the three materials (lime, sand and clay). It is interpreted that low quality construction technique was applied as the limes are very heterogeneous mixture with aggregates, and curing of the lime was poorly processed in the tomb barriers. Possible limestone sources are distributed in many areas around the Mokri site where limestone conformation and quarries for commercial production are found within Yesan and Hongseong areas. Therefore, we estimated that raw materials were possibly supplied from the local mines near the Mokri site.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.2
• /
• pp.95-106
• /
• 2010

The performance of Community Land Model version 3.5 - Dynamic Global Vegetation Model (CLM-DGVM) was evaluated through a comparison with the observation over temperate deciduous forest in Gwangneung, Korea. Influence of plant phenology, composition of plant functional type, and climate variability on carbon exchanges was also examined through sensitivity test. To get equilibrium carbon storage, the model was run for 400 years driven by the observed atmospheric data at the deciduous forest of the year 2006. We run the model for 2006 with the equilibrium carbon storage at Gwangneung forest and compared the model output with the observation. A comparison of leaf area index (LAI) between the model and observation indicated that the simulated phenology poorly represented the timing of budburst, leaf-fall, and evolution of LAI. Senescence of the phenology was delayed about four weeks and the simulated maximum LAI (of 5.8 $m^2$ $m^{-2}$) was greater than the observed value (of 4.5 $m^2$ $m^{-2}$). The overestimated LAI contributed to overestimation of both gross primary productivity (GPP) and ecosystem respiration $(R_e)$ through increased photosynthesis and foliar autotropic respiration $(R_a)$, respectively. Despite the discrepancy between the simulated and observed LAI, the simulated tree carbon storage amounts were comparable with the reported values at the site. Change in plant phenology from the simulated to the observed reduced more than six weeks of the plant growth period, resulting in the decreased amount of GPP and $R_e$. These values, however, were still higher (~10% of GPP and 40% of $R_e$) than the observed values. The effect of change in plant functional type composition (from dominant temperate deciduous forest to the coexistence of temperate deciduous and needle leaf forests) on the estimated amount of GPP and $R_e$ was marginal. The influence of climate variability on carbon storage amounts was not significant. The simulated inter-annual variation of GPP and $R_e$ from 1994 to 2003 depended on annual mean air temperature and total radiation but not on precipitation. Other deficiencies of CLM3.5-DGVM have been discussed.

• Microbiology and Biotechnology Letters
• /
• v.26 no.3
• /
• pp.250-256
• /
• 1998

D-Tagatose production from D-galactose was investigated using 35 type strains of American Culture Type Collection (ATCC) and Korean Collection for Type Cultures (KCTC) which have potential to produce D-tagatose. Enterobacter agglomerans ATCC 27987 was selected as a D-tagatose producing strain due to its short fermentation time and high production of D-tagatose. Optimization of the culture conditions for D-tagatose production by E. agglomerans ATCC 27987 was performed. Among various carbon sources, D-galactose was the most effective carbon source for D-tagatose production. As the D-galactose concentration was increased, cell growth and D-tagatose production increased. Effect of nitrogen sources on D-tagatose production was studied. Of inorganic nitrogen sources, ammonium sulfate was effective one for D-tagatose production and yeast extract was the most suitable organic nitrogen nutrient. The concentrations of inorganic compounds such as KH$_2$PO$_4$, K$_2$HPO$_4$, and MgSO$_4$$.$7H$_2$O were also optimized for D-tagatose production. The optimal medium was determined to contain D-galactose of 20 g/l, yeast extract of 5.0 g/l, (NH$_4$)$_2$SO$_4$ of 2.0 g/l, KH$_2$PO$_4$ of 5.0 g/l, K$_2$HPO of 5.0 g/l, and MgSO$_4$$.$7H$_2$O of 5 mg/l. The optimal environmental conditions in a 250-$m\ell$ flask were found to be pH of 6.0, temperature of 30$^{\circ}C$, and agitation speed of 150 rpm. D-tagatose of 0.41 g/l could be obtained in 24 h from 20 g/l D-galactose at the optimal culture condition without induction and cell concentration.

• Korean journal of applied entomology
• /
• v.13 no.1 s.18
• /
• pp.1-10
• /
• 1974

The activities of pectolytic and cellulolytic enzymes produced from slices of ginseng root infected with Cylindrocarpon destructains(Zins.) Scholtern were proportional to each concentration and reaction time. Activities of cellulase(Cx), endo-polygalacturonase(endo-PG), endo-polymethylg-alacturonase(endo-PMG), exo-polygalacturonase(exe-PG), and exe-polymethylgalacturonase(exo-PMG) were maximum on the 4th day after inoculation. No endo-PG and endo-PMG were detected at the first and second days, while exo-PG exo-PMG were active. On the 6th day, all pectic enzymes were completely lost, whereas Cx remained at a high concentration. pH optima of Cx, endo-PG, endo-PMG, exo-PG, and exo-PMG were 6.0, 5.5, 8.0, 7.0 to 7.5, and 8.5, respectively. Temperature optima of Cx, endo-PG, endo-PMG exo-PG, and exo-PMG were $66^{\circ}C\;53^{\circ}C\;41^{\circ}C\;37^{\circ}C\;and\;40^{\circ}C$, respectively. Cx was only inhibited by $0.05M\; Hg^{++}$ among 16 ions tested. Inhibitory effects of ions on pectolytic enzymes varied, however$M Fe^{+++}\;and\;0.05M\;Al^{+++}$ were the best in general. Among 8 fungicides, none of them inhibited all the enzymes studied at $0.1\%$, active ingredients. Exo-PG were highly inhibited by all of the fungicides, of which difolatan was the most inhibitory to all the pectic enzymes. $Ca^{++}\; at\; 0.02M\; and\;Fe^{+++}\;at\;0.02M$ completely inhibited all the pectolytic enzymes, and Cx was inhibited $30\%$ and $70\%$ at the same concentration, respectively Formalin almost inhibited exo-PG and exe-PMG at $0.8\%$ but not the other enzymes especially Cx. Difolatan at $0.8\%$ inhibited all the enzymes concerned above $80\%$. The cellulolytic and pectolytic enzymes of C. destructans must be closely associated with the ginseng root rot and should be inhibited to control the disease effectively.

• Journal of Technologic Dentistry
• /
• v.19 no.1
• /
• pp.21-35
• /
• 1997

The Ag-Pd-Cu alloys containing a small amount of Au is commonly used for dental purposes, because this alloy is cheaper than Au-base alloys for clinical use. However, the most important characteristic of this alloy is age-hardenability, which is not exhibited by other Ag-base dental alloys. The specimens used were Ag-20Pd-20Cu ternary alloy and Au addition alloy. These alloys were melted and casted by induction electic furace and centrifugal casting machine in Ar atmoshpere. These specimens were solution treated for 2hr at $800^{\circ}C$ and were then quenched into iced water, and aged at $350{\sim}550^{\circ}C$ Age-hardening characteristics of the small Au-containing Ag-pPd-Cu dental alloys were investigated by means of hardness testing, X-ray diffraction and electron microscope observations, electrical resistance, differential scanning calorimetric, emergy dispersed spectra and electron probe microanalysis. Principal results are as follows : Hardening occured in two stages, I. e., stage I in low temperature and stage II in high temperature regions, during continuous aging. The case of hardening in stage I was due to the formation of the Llo type face centered tetragonal PdCu-ordered phase in the grain interior and hardening in stage I was affedted by the Cu concentration. In stage II, decomposition of the $\alpha$ solid solution to a PdCu ordered phase(L1o type) and an Agrich ${\alpha}2$ phase occurred and a discontiunous precipitation occurred at the grain boundary. Form the electron microscope study, it was concluded that the cause of age-hardening in this alloy is the precipitation of the PdCu ordered phase, which has AuCu I type face-centered tetragonal structure. Precipitation procedure was ${\alpha}\to{\alpha}+{\alpha}2+PdCu\to{\alpha}1+{\alpha}2+PdCu$ at Pd/Cu = 1 Ag-Pd-Cu alloy is more effective dental alloy as ageing treatment and is suitable to isothermal ageing at $450^{\circ}C$.

• Journal of Korean Society of Forest Science
• /
• v.102 no.2
• /
• pp.210-215
• /
• 2013

Litterfall production represents a major contribution of carbon and nutrient cycling in forest ecosystems. This study was carried out to determine the litterfall production in a broadleaved deciduous forest at the Mt. Keumsan Long Term Ecological Research (LTER) site, Southern Korea. Littefall was collected monthly or bimonthly from the site for 7 years from 2004 to2010. Leaf and reproductive (catkins) litters showed a seasonal variation, but litters of needle, branch, and barks were not changed across the seasons. Annual leaf litter of Quercus serrata and Carpinus laxiflora were significantly different (p<0.05) but that of C. cordata, Chamaecyparis obtusa, and Pinus thunbergii was not significantly changed for 7 years (p>0.05). Annual average litterfall production was 5,223 kg/ha, but annual variations were very large with minimum of 4,110 kg/ha/yr in 2004 and maximum of 6,002 kg/ha/yr in 2007. Total litterfall comprised of 2,323 kg/ha/yr in Q. serrata, 442 kg/ha/yr in C. laxiflora, 157 kg/ha/yr in C. cordata, 131 kg/ha/yr in Acer pseudosieboldianum, 390 kg/ha/yr in other deciduous tree species, 74 kg/ha/yr in P. thunbergii, 37 kg/ha/yr in C. obtusa, 672 kg/ha/yr in branches, 515 kg/ha/yr in miscellaneous, 448 kg/ha/yr in reproductive parts, and 54 kg/ha/yr in barks. respectively. The results indicate that litterfall production of the Mt. Keumsan LTER site was yearly fructurated with the positive linear relationship between leaf or total litterfall and annual mean temperature if no disturbance such as a typoon, and was lower than that of other Korean LTER sites.

• Food Science and Preservation
• /
• v.22 no.5
• /
• pp.727-734
• /
• 2015

In this study, three GRAS (generally recognized as safety) strain was isolated from Doenjang and Cheonggukjang and identified as a protease-producing microorganism, following the appearance of a clear zone around its colony when cultured on a medium containing skim milk. Based on an analysis of the nucleotide sequence of 16S ribosomal RNA, the strains wereas identified as Bacillus amyloliquefaciens and wereas therefore named Bacillus amyloliquefaciens CDD5, Bacillus amyloliquefaciens CPD4, and Bacillus amyloliquefaciens CGD3. Here, we analyzed the protease and ${\alpha}$-glucosidase inhibitory activities of the three B. amyloliquefaciens strains. Among the isolated strains, B. amyloliquefaciens CGD3 exhibited the highest protease activity (9.21 U/mL, 24 hr). The protease activities of B. amyloliquefaciens CDD5 and B. amyloliquefaciens CPD4 reached 1.14 U/mL and 8.02 U/mL, respectively, at 48 hr. The proteases from the three B. amyloliquefaciens strains showed the highest activities within a pH range of 8.0-9.0 at $50^{\circ}C$, and casein was found to be the preferred substrate on evaluating enzyme activity in the substrate specificity assay. The B. amyloliquefaciens strains exhibited maximal growth when the nutrient broth medium had an initial pH within the range of 5.0-10.0, 6-9% sodium chloride (NaCl), and 5% glucose. B. amyloliquefaciens CDD5 exhibited a low ${\alpha}$-glucosidase inhibition rate (5.32%), whereas B. amyloliquefaciens CPD4 and B. amyloliquefaciens CGD3 exhibited relatively higher inhibition rates of 96.89% and 97.55%, respectively.

• Korean Journal of Plant Resources
• /
• v.25 no.1
• /
• pp.156-168
• /
• 2012

Chrysanthemum is a cut flower species that normally lasts for 1 to 2 weeks, in some cases 3-4 weeks. This has been attributed to low ethylene production during senescence. Reduction in cut flower quality has been attributed to the formation of air embolisms that partially or completely blocks the water transport from the vase solution to the rest of the cut flower stem, increasing hydraulic resistance which may cause severe water stress, yellowing, wilting of leaf, and chlorophyll degradation. Standard type chrysanthemum can be harvested when buds were still tightly closed and then fully opened with the simple bud-opening solution. Standard type chrysanthemum can also be harvested when the minimum size of the inflorescence is about 5-6 cm bud which opened into the first flower full-sized flower. While spray varieties can be harvested when 2-4 most mature flowers have opened (40% opening). Cut flowers are sorted by stem length, weight, condition, and so on. Standard chrysanthemum is 80 cm length for standard type and 70cm for spray type. Pre-treatment with a STS, plant regulator such as GA, BA, 1-MCP, chrysal, germicide, and sucrose, significantly improved the vase life and quality of cut flowers. It is well established that vase solutions containing sugar can improve the vase life of cut chrysanthemum. Chrysanthemum is normally packed in standard horizontal fiberboard boxes. Chrysanthemum should normally be stored at $5{\sim}7^{\circ}C$. Precooling resulted in reduction in respiration, decomposition, and transpiration activities as well as decoloration retardation. There was significant difference between "wet" storage in 3 weeks and "dry" storage in 2 weeks. In separate pulsing solution trials, various germicides were tested, as well as PGRs to maintain the green color of leaves and turgidity. Prolonging vase life was attained with the application of optimal solution such as HQS, $AgNO_3$, GA, BA and sucrose. This also retarded senescence in leaves of cut flower stems. Fresh cut chrysanthemum can be transported using a refrigerated van with $5{\sim}7^{\circ}C$. Increasing consumption and usage of cut chrysanthemum of various cultivars would require efficient transport system, and effective information exchange among producer, wholesaler, and consumer.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.776-782
• /
• 2005

The effects of purification using ${\alpha}-amlyase$ (Termamyl 120L) on physicochemical properties of ${\beta}-glucan$ from oat bran were studied. Four fractions were selected as fraction A ($55^{\circ}C$, 15%, pH 6), fraction B ($45^{\circ}C$, 15%, pH 6), fraction C ($50^{\circ}C$, 0%, pH 7), and fraction D ($50^{\circ}C$, 10%, pH 5) from the result of physiological test, and three consecutive subfractions were obtained by repeated ${\alpha}-amlyase$ treatments on the each fractions. The contents of ${\beta}-glucan$, protein, and ash after purification were in 81.4-88.2%, 4.1-6.3% and 2.6-6.2%, respectively. The apparent viscosities of purified ${\beta}-glucan$ aqueous solutions were similar to those of hydroxy methyl cellulose. Glucose was a major monosaccharide of ${\beta}-glucan$ extracts, and xylose and arabinose were also detected as minor constituents on TLC. The average molecular weight ranged $2.0{\times}10^6-5.1{\times}10^6$ and was decreased after purification. From the result of the differential scanning calorimetry, the melting point ranged $130-140^{\circ}C$ with purification step and thermal transition enthalpy was increased. The ratio of ${\beta}-(1{\rightarrow}3)\;to\;{\beta}-(1{\rightarrow}4) $ linkages were 1:2.22-1:2.52, and increased up to 1:5.50 after purification.