• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.39-50
• /
• 2001

In proceeding with orthodontic treatment, the prediction for the shape, growth rate and growth direction of mandible plays a major role to set up the treatment plan and determine its period and prognosis. Various approaches being made so far have shown that the linear and angular measurement using lateral cephalograms are relatively accurate to estimate them. This study was purposed to find the shape of mandible more clearly by preventing the overlap of the Condyle head area which appears in lateral cephalogram, and to estimate its growth rate by comparing the growth quantity and ratio via lateral area measurement. This experimental was performed against 40 patients total, of which Class I of 14, Class II of 9 and Class III of 17 consist. Wide open lateral cephalograms of 40 patients were taken over average period of 4 Year 3 Months, then the linear and angular measurements were carried out with 11 itemized lists. Autocad Rl4 application program was utilized to draw their appearance, measure and compare their lateral area. As a result of study, conclusions were made as follows; 1. Mandibular body length (gonion-menton) tended to increase in order of CIII, CI and CII, and Mandibular body length of CIII group had a tendency to grow twice faster than that of CII group. 2. In lateral items such as Go-Me, A-Cd, B-Cp, E-F and G-H, CIII showed a significant increase on the year-average quantity and rate of the growth, and especially apparent difference was observed in CIII group rather than CII group. 3. For the 4 Year 3 Months period, the year-average growth quantity of lateral area of the mandible was $1.0cm^2$ for Class I, $0.8cm^2$ for Class II and $1.4cm^2$ for Class III, which corresponds to $11.9\%,\;11.8\%\;and\;20.3\%$ of growth ratio respectively. Thus, growth ratio almost 2 times more than other groups was observed in group CIII while growth ratio between group CI and CII has little difference. 4. Considering the results as above, it can be proposed that the difference in size of the mandible between groups is caused by the difference in the growth rate and growth quantity of the mandible, which generated in the middle of growth, rather than the difference in size of congenital Jaw-bone.

• Proceedings of the Korean Society of Organic Agriculture Conference
• /
• 2009.12a
• /
• pp.282-282
• /
• 2009

환경오염에 대한 우려 및 안전농산물에 대한 소비자욕구 증대로 유기농산물 시장규모가 최근 3년간 2.8배 성장 추세이다. 친환경농산물 인증면적은 '00년 2,039 ha에서 '07년 122,882 ha로 급격히 증가하고 있으나 생태적 원리에 부합된 벼 재배기술이 부족하며 특히 무경운 논토양에 대한 경영분석 자료는 거의 없는 실정이다. 본 연구는 유기농업기술을 종합적으로 투입한 시범마을을 육성하기 위하여 하동군 양보면 예성마을 1ha를 대상으로 관행농업과 무경운 자운영 피복 벼 기계이앙을 실증하여 경제적인 효과를 검토하였다. 토양 관리를 위해 2007년 9월 10일에 자운영을 3 kg/10a 파종하여 겨울철 토양 생태계를 유지하였고 화학비료나 농약을 사용하지 않았다. 볍씨 소독은 마른 종자를 60 $^{\circ}C$에서 8분간 침지하는 열탕침법을 이용하였으며 논 물담기는 5월 28일경 15 cm 이상 깊게 하여 자운영이 잘 분해되도록 하였다. 기계이앙은 6월 10일경 표면 1 cm 이내의 물 깊이에서 식부장치를 최대한 깊게하고 주수는 주당 5-7주 정도로 실시하였으며 기계이앙 후에는 5일 정도 물을 담지 않고 그대로 두고 그 후 물을 10 cm 이상 깊게 하여 잡초발생을 억제하였다. 중간낙수는 7월 10일경 1회 처리하였고 수확기 낙수는 9월 23일 실시하였다. 무경운 처리구의 이앙전 토양 가밀도는 관행 1.30 g $cm^{-3}$ 비해 0.09 g $cm^{-3}$ 정도 가벼운 것으로 나타났고 공극률은 관행 50.8%에 비해 3.5% 높은 것으로 나타났으며 특히 수분률이 3.5% 높았다. 무경운 자운영 피복 기계이앙 처리구의 잡초발생 건물량은 7월 4일경 피 8.8 g $m^{-2}$, 여뀌 10.8 g $m^{-2}$ 이었으며 9월 18일에는 피 16.0 g $m^{-2}$, 여뀌 12.3 g $m^{-2}$였다. 수확기 관행처리구의 주당 이삭수는 16.7개, 수당립수는 101개, 천립중은 25.4 g, 등숙비율은 82.3%로 수량은 517 kg $10a^{-1}$ 였으며 무경운 자운영 피복 기계이앙은 주당 이삭수가 14.1개, 수당 립수는 103개, 천립중은 26.2 g, 등숙비율은 91.2%로 수량이 456 kg $10a^{-1}$였다. 무경운 자운영피복 벼 기계이앙은 기경작업이나 시비작업 등이 없으므로 노동력이 60% 절감되었으며 농가소득은 5% 증대되었다. 따라서 농업분야 저탄소 녹색성장과 관련하여 자연 생태계를 보전하면서 농가소득을 유지할 수 있는 방법으로 무경운 자운영 피복 벼 기계이앙이 효과적인 것으로 판단되었다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.4
• /
• pp.444-451
• /
• 1999

The effect of individual density on the growth and survival of Laminaria japonica was experimentally evaluated. Four density treatments of young sporophytes (0.63 cm In maximum length) grown in the laboratory were transplanted to the southeastern coast of Korea and their survivorship and growth rate were measured twice a month from January to July, 1996. Plants showed higher survivorship at low density. Final densities at three lowest densities were similar, ranging from 34 to 38 inds${\cdot}100 cm^{-2}$. Planis at the highest density, however, suffered greater decline than at lower densities, and only 21 plants remained at the end of this study. Mean frond size (length and width) fluctuated throughout the study period at four densities. During the first two mouths after outplanting, mean frond size was negatively correlated with initial density, However, the size was density independent after three months. As stand density increased, size-frequency distribution through time tended to be more positively skewed. The 10 largest plants grew faster in frond size and attained larger size in the lower density. There was a positive relationship between plant size and relative growth rate (or survival). The slope of yield-density (Y-D) relationships at four densities ranged from -0.060 to -0.137. The study suggests that density can strongly affect the survival and growth of this alga. The density-dependent survival and growth patterns, however, were not strictly consistent with those of terrestrial plants.

• KSBB Journal
• /
• v.8 no.2
• /
• pp.164-171
• /
• 1993

The production of extracellular polysaccharide by Methylomonas mucosa (NRRL B-5696) was investigated. The microorganism uses methanol as the carbon source for their growth and produces exopolysaccharides. The productivity of exopolysaccharides was investigated under various culture modes: batch, fed-batch and continuous culture. In flask culture the growth of cell mass and the production of polysaccharide were inhibited at above 1% (v/v) methanol. At 1%(v/v) methanol maximum specific growth rate was obtained. As C/N ratio (g methanol/g ammonium sulfate) increased, polysaccharide production increased and cells mass decreased. Magnesium ion was also found to be essential for the polysaccharide production. In batch culture the production of polysaccharides was more affected by the specific growth rate than the cell concentration. In fed-batch culture the concentration of polysaccharide was 4 times higher than that of batch culture, but the yield was lower. The productivity of fed-batch with continuous feeding was higher than that of batch or fed-batch with intermittent feeding. This is due to no methanol limitation or inhibition that used to occur in fed-batch culture with intermittent feeding. In continuous culture pure oxygen was supplied to avoid the oxygen limitation. As the dilution rate in- creased up to 0.21 h-1, the yield and productivity increased. The solution viscosity of the produced polysaccharide obtained from above increased exponentially with the concentration of polysaccharide.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.94-94
• /
• 1998

최근 a-CH:N (hydrogenated amorphous carbon nitride)가 a-CH 보다 팡학적, 기계객성 질이 우수하므로 이에 대한 연구가 활발하게 진행되고 있다. 본 실험에선 원료 가스의 유량 은 5 sccm으로 고정시킨 채 원료가스내의 질소 대 메탄 혼합비 (N2ICHa)훌 O 에서 4 까지 변 화시 키 띤서 DC saddle-field PECVD (plasma enhanced chemical vapour d야Xlsition)훌 이 용하여 a-CH:N 박막융 제작하여, 가스 혼합비가 박막의 미세구조와 광학척 성질에 미치는 영향올 연구하였다. 박막 성장시 진공조 내의 압력온 throttle valve롤 사용하여 90 mTorr로 일정하게 유지하였으며 양극 전압과 기판전업은 각각 500 V, 200 V로 고청하고 상온에서 중 착하였다. a a -step으로 측정 한 a-C:H:N 박막의 두께는 혼합가스내의 질소의 양이 증가할수륙 4800 A에서 2000 A로 두께가 감소하였지만 표면 rot핑비less는 혼합가스내의 질소의 양이 중가할 수록 중가함을 AFM (atomic force mi$\alpha$'0 scopy) 으로 관찰하였다. 박막내의 C와 N의 정량 분석은 RES (Rutherford back scattering s야ctroscopy) 핵공명법을 이용하여 분석하였다. X XPS (X -ray photoelectron spec$\sigma$oscopy) 와 FT-IR (Fo삐er transform-infrared s spectrometry)로 미세구조률 측정한 결과 혼합가스내의 질소의 양이 충가할수록 C-H기는 감 소하였지 만 C르N, N-H기 는 늘어 났다. 또한 PL (photoluminescence) 측정 결과 웬료가스 내 메탄과 질소의 비율이 1:1일 때 최대의 발광올 보였고 UVS (비없 vi이et spec$\sigma$orne$\sigma$y)으 로 측정한 광학쩍 에너지 캡은 혼합비내의 질소의 양이 증가할수록 2.53 eV에서 2.3 eV로 감 소하였다. 이를 결과로부터 원료가스내의 N2ICHa의 중가에 따른 박막의 미세구조 변화와 광학척 생 질의 상관 관계가 고찰될 것이다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.577-583
• /
• 2001

The digestive enzyme activities such as $\alpha-amylase$, trypsin and pepsin from the laboratory-reared river puffer Takifugu obscurus were measured from the time course of 1 day until the 65 day after hatching. In the case of $\alpha-amylase$, it was showed minimum activity of 0.0493 U/mg at the total length (TL) 10 mm, and showed maximum activity of 0.1480 U/mg at 19 mmTL. Trypsin and pepsin were showed their maximum activities of 0.0264, 0.0258 U/mg and 0.0178, 0.0201 U/mg when the total length of 16 and 24 mm, and represented remarkable correlations between the changes of enzyme activity and growth rate. The ontogenetic variations of digestive enzymes were represented clearly different patterns; i.e, the pepsin showed higher activity when the periods of larva ($4\~5\;mmTL$) and juvenile II ($19\~24\;mmTL$), however, the trypsin represented maximum activity at the stages of juvenile I ($11\~16\;mmTL$) and young fish (27 mmTL), respectively.

• International Journal of Highway Engineering
• /
• v.6 no.2 s.20
• /
• pp.37-45
• /
• 2004

The asphalt concrete pavement takes various advantages of better riding quality, serviceability and easier maintenance. At the same time, it addresses a weak point of the premature failures due to rapid increasement of traffic volume, heavy vehicles and high temperature in summer. It increases the expenditure of maintenance and repair. In order to improve the performance of asphalt pavement avoiding this premature failure, the use reinforcements with geosynthetics have been considered. Geosynthetics are known as an effective reinforcement to restrain fatigue and reflective cracks in asphalt pavements. In this study, a comprehensive parametric study is conducted to capture the efficiency of geosynthetic-reinforcements using viscoelastic properties of the asphalt concrete(AC) layer. The investigated parameters were reinforcement location, AC layer thickness, temperature distribution across the AC layer and modulus of AC and base layer. As a result of observations, that reinforced asphalt concrete could be used effectively for improving resistance against fatigue cracks and permanent deformation. Especially, when a geogrid was placed at the interface between the asphaltic base and the subbase, tensile stress in the horizontal direction was significantly reduced.

• Journal of Platform Technology
• /
• v.11 no.5
• /
• pp.49-58
• /
• 2023

Factory energy management system is rapidly growing and evolving due to factors such as the 3rd Basic Energy Plan and global energy cost increases, as well as environmental issues. However, implementing an essential data collection system for energy management in factory settings, which have limited space and unique characteristics, presents spatial, environmental, and energy-related challenges. This paper endeavors to mitigate these challenges by devising a data collection system implemented through an edge-based lightweight platform. A comparison and evaluation of database operation on edge devices are conducted. To conduct the evaluation, a benchmarking tool called CDI Benchmark is developed, utilizing the characteristics of existing factories involved in practical applications. The evaluation results revealed that RDBMS systems like MySQL encountered errors in the database due to high data insertion loads, making them inoperable. On the other hand, InfluxDB, thanks to its highly efficient compression algorithm, demonstrated compression rates about 6 times higher than MyRocks according to the evaluation. However, it was observed that MyRocks outperformed InfluxDB by a significant margin, recording a maximum processing time approximately 80 times faster compared to InfluxDB.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2002.11a
• /
• pp.502-511
• /
• 2002

컴퓨터의 기술적 발전은 사회 여러 분야에 막대한 영향을 끼쳤다. 그중 악보 인식분야에도 커다란 영향을 주었다 그러나, On-line 상에서 그린 악보를 실시간으로 정형화된 악보형태로 변환하는 처리에 대한 연구가 미흡하여 이에 대한 연구가 필요하다. 본 논문에서는 실시간으로 악보를 인식하고, 사용자의 편의를 도모하기 위해 DP(Dynamic Programming) 매칭법을 이용한 On-Line 악보인식에 관한 방법을 제안하였다. 본 연구에서는 실시간으로 입력되는 악상기호를 인식하기 위해, 가장 유효한 정보인 악상 기호내의 방향, x, y 좌표를 이용하여 벡터형태로 추출한 후 음표와 비음표(쉼표, 기타기호)의 두개의 그룹으로 나누어진 표준패턴과의 DP매칭을 통해 인식한다. 먼저 tablet을 통해 실시간으로 악상 기호를 입력할 때 생기는 x, y좌표를 이용하여, 펜의 움직임에 대한 16방향 부호화를 수행한다. 음표와 비음표를 구분하기 위한 시간을 줄이고자 16방향 부호화를 적용하치 않고 사사분면부호화를 적용한다. 음표를 약식으로 그릴 경우 음표 머리에 해당하는 부분의 좌표는 삼사분면에 분포하고, 폐곡선의 음표일 경우에는 좌표가 사사분면에 고르게 나타난다. 폐곡선을 제외한 음표의 머리는 폐곡선과 같은 조건이면서 입력받은 y좌표값들 중에서 최소값과 최대값을 구한 다음 2로 나눈 값을 지나는 y좌표의 개수가 임의의 임계값 이상이면 음표로 판단한다. 위 조건을 만족하지 않을 경우 비음표로 취급한다. 음표와 비음표를 결정한 다음, 입력패턴과 표준패턴과의 DP매칭을 통하여 벌점을 구한다. 그리고 경로탐색을 통해 벌점에 대한 각각의 합계를 구해 최소값을 악상기호로 인식 하였다. 실험결과, 표준패턴을 음표와 비음표의 두개의 그룹으로 나누어 인식함으로써 DP 매칭의 처리 속도를 개선시켰고, 국소적인 변형이 있는 패턴과 특징의 수가 다른 패턴의 경우에도 좋은 인식률을 얻었다.r interferon alfa concentrated solution can be established according to the monograph of EP suggesting the revision of Minimum requirements for biological productss of e-procurement, e-placement, e-payment are also investigated.. monocytogenes, E. coli 및 S. enteritidis에 대한 키토산의 최소저해농도는 각각 0.1461 mg/mL, 0.2419 mg/mL, 0.0980 mg/mL 및 0.0490 mg/mL로 측정되었다. 또한 2%(v/v) 초산 자체의 최소저해농도를 측정한 결과, B. cereus, L. mosocytogenes, E. eoli에 대해서는 control과 비교시 유의적인 항균효과는 나타나지 않았다. 반면에 S. enteritidis의 경우는 배양시간 4시간까지는 항균활성을 나타내었지만, 8시간 이후부터는 S. enteritidis의 성장이 control 보다 높아져 배양시간 20시간에서는 control 보다 약 2배 이상 균주의 성장을 촉진시켰다.차에 따른 개별화 학습을 가능하게 할 뿐만 아니라 능동적인 참여를 유도하여 학습효율을 높일 수 있을 것으로 기대된다.향은 패션마케팅의 정의와 적용범위를 축소시킬 수 있는 위험을 내재한 것으로 보여진다. 그런가 하면, 많이 다루어진 주제라 할지라도 개념이나 용어가 통일되지 않고 사용되며 검증되어 통용되는 측정도구의 부재로 인하여 연구결과의 축적이 미비한 상태이다. 따라서, 이에 대한 재고와 새로운 방향 모색이 필요하다고 사료된다.로 사료되며, 임신관련 cytokine에 대한 다양한 연구가 요구되고 있다.₂/Hf(Variable)/Si 계에서 HfO₂ 박막이 Si 기판위에 직접 증착되면, 순수 HfO₂ 박막의

• Journal of Applied Biological Chemistry
• /
• v.64 no.3
• /
• pp.217-223
• /
• 2021

5-aminolevulinic acid (ALA) is a representative photosensitizer used in numerous fields including cancer diagnosis and treatment. In this study, experiments were conducted to optimize the growth of Rhodobacter sphaeroides and production of ALA through LED irradiation of various wavelengths, addition of organic acid precursors of ALA, and changes in glucose concentration. After 72 h cultivation, the 850 nm wavelength LED irradiated at the same light intensity as the incandescent lamp increased the growth of R. sphaeroides and the production of ALA about 1.5- and 1.8-fold as compared with the control, respectively (p <0.0001 and p <0.0001). As a result of culturing R. sphaeroides by irradiating an LED with a wavelength of 850 nm after adding organic acid to the final concentration of 5 mM in culture medium, the production of ALA was increased about 2.8-fold in medium supplemented with pyruvic acid compared with the control (p <0.0001). In addition, the growth of the strain and the production of ALA were increased about 2.9- and 3.4-fold in medium supplemented with 40 mM glucose compared to the control which added only 5 mM pyruvic acid, respectively (p <0.0001 and p <0.0001). The yield of ALA per cell dry mass was about 1.4 folds higher than that of the control in 20 and 40 mM glucose, respectively (p <0.001). In conclusion, the growth of R. sphaeroides and production of ALA were increased by 850 nm wavelength LED irradiation. It also optimized the growth of R. sphaeroides and production of ALA through organic acid addition and glucose concentration changes.