• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.2
• /
• pp.104-107
• /
• 2009

It was verified that the effect of the distance between current input point and output point on direct current potential drop(DCPD) in the material with two-dimensional surface notch. If the distance between potential drop measuring points was fixed at a certain distance, the potential drop was decreased with increasing the distance between current input and output points. Hence it is the effect way to increase sensitivity in DCPD that the current input and output points should be located near the potential measuring points. DCPD was a useful method for surface crack sizing because the potential drop was proportional to the length of notch. When the current input and output points are located near the potential measuring points, even small length crack can be measured by DCPD technique.

• Journal of Energy Engineering
• /
• v.10 no.3
• /
• pp.272-277
• /
• 2001

An experimental study of jet impinging the non-isothermal heating surface with linear temperature gradient is conducted with the presentation of the turbulent flow characteristics and the heat transfer rate, represented by the Nusselt number. The jet Reynolds number ranges from 15,000 to 30,000, the temperature gradient of the plate is 2~4.2$^{\circ}C$/cm and the dimensionless nozzle to plate distance (H/D) is from 2 to 10. The results show that the peak of heat transfer rate occurs at the stagnation point, and the heat transfer rate decreases as the radial distance from the stagnation point increases. A remarkable feature of the heat transfer rate is the existence of the second peak. This is due to the turbulent development of the wall jet. Maximum heat transfer rate occurs when the axial distance from the nozzle to nozzle diameter (H/D) is 6 or 8. The heat transfer rate can be correlated as a power function of Prandtl number, Reynolds number, the dimensionless nozzle to plate distance (H/D) and temperature gradient (dT/dr). It has been found that the heat transfer rate increases with increasing turbulent intensity. The wall jet is influenced by temperature gradient and the effect becomes more important at higher radii.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.12
• /
• pp.1112-1115
• /
• 2015

Recently, there have been advancements in radar related material technology, circuit design techniques and architecture design techniques. These have led to developments in radars' performance while decreasing the costs. Many studies have been carried out to apply radars to multipurpose application. In this study, a reconfigurable S-/X- band radar structure for multipurpose application is proposed and implemented. This radar measures a $51.2cm{\times}50.6cm$ target for 10 times from 2 m to 6 m range with 0.25 m distance step. The measured results show that this radar has 26.40 cm maximum range error, 5.63 cm average range error, and 0.24 cm range error variance at S-band while it has 8.53 cm maximum range error, 2.52 cm average range error, and 0.04 cm range error variance at X-band.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.1079-1082
• /
• 2015

In Article 23 of Technical regulations for Telecommunication Line and Facilities, we have criteria of separation distance between telecommunication lines and power lines, and its related exceptional conditions. However, this is a conflicts condition with Article 32 that provides the type of indoor telecommunication cables such as twisted-pair cables and optical fiber cables. Also, it is frequently raised that exceptional condition related the PoE cables with up to 15.4W is improved to accept PoE cables with up to 30W. In this paper, we have proposed improvement plans of Technical regulations for separation distance between telecommunication lines and power lines by analyzing the variety of standard specifications at home and abroad.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8791-8799
• /
• 2015

In this paper, One-way car-sharing System represents the verification system consider events in revenue effects. Revenue which the time and distance represented the graph, compare one-way vehicle relocate car-sharing system which proven in existing international papers with one-way vehicle relocate car-sharing system consider the event currently in the Korea. Especially, The maximum profit according to the distance and time were assessed through multiple linear regression analysis, and there are probable maximum loss allow for the maximum loss. The company suggested using the event as a discount coupon to customers through various marketing strategies, and then focused on increasing customer demand. So, Correlation analysis to determine the maximum revenue of the actual travel distance and time were carried out through Non-linear Regression.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.3
• /
• pp.201-209
• /
• 2016

The object of this study was to evaluate the separation distance from a temporary storage facility satisfying the dose criteria. The calculation of ambient dose rates took into account cover soil thickness, facility size, and facility type by using MCNPX code. Shielding effects of cover soil were 68.9%, 96.9% and 99.7% at 10 cm, 30 cm and 50 cm respectively. The on-ground type of storage facility had the highest ambient dose rate, followed by the semi-ground type and the underground type. The ambient dose rate did not vary with facility size (except $5{\times}5{\times}2m\;size$) due to the self-shielding of decontamination waste in temporary storage. The separation distances without cover soil for a $50{\times}50{\times}2m\;size$ facility were evaluated as 14 m (minimum radioactivity concentration), 33 m (most probably radioactivity concentration), and 57 m (maximum radioactivity concentration) for on-ground storage type, 9 m, 24 m, and 45 m for semi-underground storage type, and 6 m, 16 m, and 31 m for underground storage type.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.889-896
• /
• 2023

Changes in the energy spectrum were analyzed using ^99mTc as a point source and a scattering phantom, and the shielding effect of the lead apron according to the changed gamma ray energy was evaluated. In the gamma ray energy spectrum of the scattering phantom, the photo peak area decreased and the compton scattering area increased compared to the point source. The coefficients for each energy range according to the change in the shape of the gamma ray source showed a reduction rate of up to 66.1 % at a distance of 20 cm compared to the coefficient of the point source, and in the compton scattering area, the coefficient of the scattering phantom was 122.2 % at a distance of up to 40 cm compared to the coefficient of the point source. In the difference in shielding rate according to the distance between the source and the scattering phantom using a gamma camera, the photo peak area showed similar results, but in the Compton scattering area, the shielding rate of the scattering phantom at a distance of 20 cm increased by 29.2 % compared to the shielding rate of the point source. As the distance increased, the difference in shielding rate decreased. In measuring the shielding rate of the lead apron using a radiation dosimeter, the difference in the shielding rate of the scattering phantom was up to 15.3 %, and as the distance increased, the difference in the shielding rate between the two sources decreased. The shielding rate of the lead apron of the scattering phantom is higher than that of the point source, and the effectiveness of the lead apron increases as the distance to the source increases. As a result, wearing a lead apron when directly confronting a patient who has injected radioactive pharmaceuticals is expected to be helpful in reducing radiation exposure.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10b
• /
• pp.457-462
• /
• 2007

사용자가 가능한 센서 가까이에서 이동하는 문제를 최단거리유지문제라 하며, 무선 연결의 안정성을 높이기 위해서 두 개의 센서로부터 가까이에 위치하여 사용자가 움직이는 이동경로를 차선최단거리유지이동경로라고 한다. 이 논문에서는 주어진 센서들의 집합 U와 시작점 s, 끝점 t가 주어질 때, s에서 t까지 이르는 경로로서, 가장 가까운 두 개의 센서까지의 거리가 최소인 차선최단거리유지이동경로를 찾는 $O((c^2n+e)log(c^2n))$-시간 알고리즘을 제시한다. 여기서 c는 집합 U의 하나의 사이트가 갖는 최대 보로노이 선분의 개수이다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.10-16
• /
• 2007

In this paper, we propose a technique for retrieving images using spatial color correlation and texture characteristics based on local fourier transform. In order to retrieve images, two new descriptors are proposed. One is a color descriptor which represents spatial color correlation. The other is a descriptor combining the proposed color descriptor with texture descriptor. Since most of existing color descriptors including color correlogram which represent spatial color correlation considered just color distribution between neighborhood pixels, the structural information of neighborhood pixels is not considered. Therefore, a novel color descriptor which simultaneously represents spatial color distribution and structural information is proposed. The proposed color descriptor represents color distribution of Min-Max color pairs calculating color distance between center pixel and neighborhood pixels in a block with 3x3 size. Also, the structural information which indicates directional difference between minimum color and maximum color is simultaneously considered. Then new color descriptor(min-max color correlation descriptor, MMCCD) containing mean and variance values of each directional difference is generated. While the proposed color descriptor includes by far smaller feature vector over color correlogram, the proposed color descriptor improves 2.5 % ${\sim}$ 13.21% precision rate, compared with color correlogram. In addition, we propose a another descriptor which combines the proposed color descriptor and texture characteristics based on local fourier transform. The combined method reduces size of feature vector as well as shows improved results over existing methods.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.10
• /
• pp.949-954
• /
• 2010

Computing the rotation-invariant distance between image time-series is a time-consuming process that incurs a lot of Euclidean distances for all possible rotations. In this paper we propose an innovative solution that significantly reduces the number of Euclidean distances using the triangular inequality. To this end, we first present the notion of self rotation distance and show that, by using the self rotation distance with the triangular inequality, we can prune many unnecessary distance computations. We next present that only one self-rotation is enough for all self-rotation distances required. Experimental results show that our self rotation distance-based methods outperform the existing methods by up to an order of magnitude.