• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1631-1637
• /
• 2019

In this paper, we propose a low-complexity robust maximum likelihood (ML) receiver for generalized spatial modulation. The proposed receiver performs the transmit antenna partition to lower the computational loads. After we divide the transmit antenna combinations into two parts, one of which is "the likely TAC part," and the other of which is "the unlikely TAC part", based on the minimum mean square error (MMSE) filtering output. We first perform the maximum likelihood detection only in the likely TAC part. Then we evaluate the reliability of the solution found in the first search, and based its reliability we decide whether we continue the search in the unlikely TAC part. This partitioned search strategy maintains the performance of the conventional robust maximum likelihood receiver and simultaneously lowers computational loads. Through simulation, we found that our newly-proposed receiver achieves considerable gains over the conventional robust ML detector in terms of the computational loads while providing almost the same performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.981-984
• /
• 2005

Recently, filtering methods for attenuating noise while preserving image details are in progress actively. And SM(standard median) fille. showed a great performance for noise removal in impulse noise environment but, it caused edge cancellation error So, variable methods that modified SM(standard median)filter have been proposed, and CWM(center weighted median) filter is representative. Also, there are several methods to improve the efficiency based on min/max operation in term of preserving detail and filtering speed. In this paper, we managed a pixel corrupted by impulsive noise using min/max value of the surrounding band enclosing a pixel, and compared the efficiency with exiting methods in the simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.7-13
• /
• 2020

This paper focuses on detecting abnormal patterns of respiration of humans. In this study, a contact-based device was used to acquire both normal and abnormal respiration signals. To this end, this paper reports the development of a monitoring system to investigate the respiratory status of humans in a normal environment. This work aims to classify the respiratory status, i.e., normal and abnormal status, quantitatively. The respiration signal is acquired using a contact-based medical device (BIOBPAC), and noise reduction is carried out before classifying the respiratory status. To reduce noise, a mixed filter that combines the Savitzky-Golay filter and Median filter is applied to the acquired respiration signals. The inter-class distance is maximized, and the intra-class distance is minimized. The proposed algorithm is straightforward and can be applied to a practical environment. In addition, the experimental results are provided to substantiate the proposed approach.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.85-90
• /
• 2017

Indoor location-based services have been developed based on the Internet of Things technologies which measure and analyze users who are moving in their daily lives. These various indoor positioning technologies require separate hardware and have several disadvantages, such as a communication protocol which becomes complicated. Based on the fact that a reduction in signal strength occurs according to the distance due to the physical characteristics of the transmitted signal, RSSI technology that uses the received signal strength of the wireless signal used in this paper measures the strength of the transmitted signal and the intensity of the attenuated received signal and then calculates the distance between a transmitter and a receiver, which requires no separate costs and makes to implement simple measurements. It was applied calculating the value for the average RSSI and the RSSI filtering feedback. Filtering is used to reduce the error of the RSSI values that are measured at long distance.It was confirmed that the RSSI values through the average filtering and the RSSI values measured by setting the coefficient value of the feedback filtering to 0.5 were ranged from -61 dBm to - 52.5 dBm, which shows irregular and high values decrease slightly as much as about -2 dBm to -6 dBm as compared to general measurements.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2523-2529
• /
• 2014

Location estimation service can be provided outdoors using various location estimation system based on GPS. However, location estimation system is based on existing indoor resources as GPS cannot be used because of insufficient visible satellites and weak signals. The fingerprinting technique that uses WLAN signal, in particular, is good to use indoors because it uses RSSI provided by AP to estimate location. However, its accuracy may vary depending on how accurate data the offline stage used where the fingerprinting map is built. The study sampled various data at the stage that builds the fingerprinting map and suggested a location estimation system that enhances its precision by saving the data of high frequency among them to improve this problem. The suggested location estimation system based on majority sampling data estimates location by filtering RSSI data of the highest frequency at the client and server to be saved at a map, building the map and measuring a similar distance. As a result of the test, the location estimation precision stood at minimum 87.5 % and maximum 90.4% with the margin of error at minimum 0.25 to 2.72m.

• Korean journal of applied entomology
• /
• v.42 no.1
• /
• pp.57-63
• /
• 2003

Accurate forecasting of occurrence time and abundance of insect pests is essential for developing technology of integrated pest management system. Digital image processing algorithms were utilized to automatically recognize rice planthoppers which are major insect pests in the rice cultivation field and were subsequently used to estimate densities in the field for efficient forecasting of insect pests. To the images taken in the rice field, image decomposition, top-hat transformation, threshold, and minimum and maximum filter were implemented for patterning individually the brown planthopper specimens attached at the bottom area of rice stems. In average 95.8cio of images were correctly recognized for estimating densities by the developed system, and the recognition rate was higher than that obtained from direct observations by experienced observers. Furthermore, the size of the recognized specimens was measured and was used for estimating the age structure in the observed brown planthopper populations.

• Proceedings of the International Union of Geodesy And Geophysics Korea Journal of Geophysical Research Conference
• /
• 2003.05a
• /
• pp.19-19
• /
• 2003

본 연구에서는 국립해양조사원의 '해양2000호'를 통해 1996년과 1997년에 측정한 동해 지역의 중력자료에 대한 자료 처리를 하였다. 효과적인 자료처리를 위해 선상중력자료 처리에 필요한 각종 보정 절차와 문제점 등을 알아보았으며, 선상자료와 해면고도계자료의 비교 및 이를 통한 선상자료의 검증을 실시하였다. 선상중력자료는 측정과 처리 과정에 있어 여러 사항을 고려하여야 한다. 즉, 육상중력기점을 이용한 절대중력으로의 환산 문제, 선박 항해 위치의 부정확성에 기인하는 문제 및 중력계의 기계적 특성과 중력 측정이 이루어질 때의 해상 조건에 의한 영향 등으로 선상중력자료에 나타나는 여러 오차를 최소화하여야 한다. 선상중력자료로부터 각종 지구중력장 연구에 필요한 중력이상을 계산하기 위해 선상중력 측정시 기인되는 각종 요인의 오차를 고려한 효과적인 보정이 이루어져야 한다. 즉, 선상중력계의 기계변이 보정, 탐사선에 대한 위치 자료의 획득 및 필터링, 그리고 탐사선의 이동으로 인한 Eotvos 효과의 정확한 계산 및 보정이 필요하고, 선상중력계의 기계적 특성에 의해 나타나는 시간지연에 대한 보정도 필요하다. 또한 이러한 보정을 통해 계산한 중력 이상에서 각 교점의 오차를 보정하는 교정오차 보정도 실시하여야 한다. 특히, 탐사선의 이동으로 인한 지구자전 각속도의 상대적인 증감의 효과로 나타나는 Eotvos 효과의 영향은 선상중력자료의 정확도에 가장 큰 영향을 미친다. 이의 정확한 계산 및 보정을 위해서는 정확한 위치정보가 필요하며 본 연구에서는 이를 위해 GPS 항해정보에 대한 Kalman 필터를 실시하였고, Eotvos 효과에 대해 Savitzky-Golay 필터를 적용하여 최적의 Eotvos 보정을 시도하였다. 본 연구에서 계산된 동해지역의 중력이상에 대한 대력적인 범위는 경도 129° - 133°이고 위도 35° - 38.3° 부근이다. 이 지역에 대한 고도이상은 최소 -42.46 mGal에서 최고 161.13 mGal사이에 분포하며, 고도이상의 평균은 14.450 mGal이다. 또한 Bouguer 이상은 최소 -l5.09 mGal에서 최고 218.61 mGal이고 이의 평균은 82.681 mGal이다. 그리고 동해지역의 선상중력 측정지역에서 선상자료에 의한 중력이상과 Altimeter 자료에 의한 고도이상의 전반적인 윤곽은 비슷하면서도 일부 작은 이상의 차이가 나타났으며, 지형자료와 비교하여 보면 Altimeter에 의한 결과보다 선상측정에 의한 결과가 더욱 잘 일치하고 있어 본 연구에서 계산한 선상자료의 타당성을 알 수 있다. 고도이상의 차이는 최소 -25.94 mGal에서 최대 85.33 mGal의 차이를 보이며 차이의 평균은 3.517 mGal, RMS는 6.774 meal이다. 이는 비교적 큰 차이로 선상측정자료의 중요성과 필요성을 단적으로 나타내고 있다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.2
• /
• pp.369-375
• /
• 2016

Most companies are willing to spend money on security systems such as DRM, Mail filtering, DLP, USB blocking, etc., for data leakage prevention. However, in many cases, it is difficult that legal team take action for data case because usually the company recognized that after the employee had left. Therefore perceiving one's resignation before the action and building up adequate response process are very important. Throughout analyzing DRM log which records every single file's changes related with user's behavior, the company can predict one's resignation and prevent data leakage before those happen. This study suggests how to prevent for the damage from leaked confidential information throughout building the DRM monitoring process which can predict employee's resignation.

• Korean Journal of Remote Sensing
• /
• v.30 no.2
• /
• pp.207-218
• /
• 2014

The information on the land cover along stream corridor is important for stream restoration and maintenance activities. This study aims to review the different classification methods for mapping the status of stream corridors in Seom River using airborne RGB and CIR digital ortho imagery with a ground pixel resolution of 0.2m. The maximum likelihood classification, minimum distance classification, parallelepiped classification, mahalanobis distance classification algorithms were performed with regard to the improvement methods, the skewed data for training classifiers and filtering technique. From these results follows that, in aerial image classification, Maximum likelihood classification gave results the highest classification accuracy and the CIR image showed comparatively high precision.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.9 s.240
• /
• pp.1235-1242
• /
• 2005

A district heating(DH) system supplies environmentally-friend heat and is appropriate for reduction of energy consumption and/or air pollutions. The DH transmission pipe, composed of supply and return pipes, has been used to transmit the heat and prevent heat loss during transportation. The two types of pipes are operated at a temperature of $75\~115^{\circ}C\;and\;40\~65^{\circ}C$, respectively, with an operating pressure of less than 1.568MPa. The objectives of this paper are to systematize data processing of transition temperature and investigate its effects on fatigue life of DH pipes. For the sake of this, about 5 millions temperature data were measured during one year at ten locations, and then available fatigue lift estimation schemes were examined and applied to quantify the specific thermal fatigue life of each pipe. As a result, a relational database management system as well as reliable fatigue lift evaluation procedures is established for Korean DH pipes. Also, since the prototypal evaluation results satisfied both cycle-based and stress-based fatigue criteria, those can be used as useful information in the future fer optimal design, operation and energy saving via setting of efficient condition and stabilization of water temperature.