• Journal of Acupuncture Research
• /
• v.29 no.1
• /
• pp.9-14
• /
• 2012

목적 : 뜸 연소 실험을 통해 간접구의 일종인 온구기의 연소 특성을 조사하였다. 방법 : 온구기를 유리판 위에 놓고 연소하여 50분간 온도 데이터를 수집하였다. 총 20개의 뜸봉을 연소하여 수집된 데이터를 분석하여 평균 온도, 최고 온도, 최고 온도 도달 시간, 최고 온도 지속 시간을 계산하였다. 또 혈류량을 증가시킨다고 보고된 온도($38^{\circ}C$)에 도달하는 시간, 그 이상의 온도로 지속되는 시간, C-fiber의 활성화를 통해 치료효과를 나타내는 것으로 보고된 온도($42-50^{\circ}C$)에 도달하는 시간과 그 범위 내의 지속시간을 계산하였다. 결과 : 평균 최고온도는 $50.4^{\circ}C$이고 평균 도달시간은 1,007초, 평균 지속시간은 27초였다. 평균최고 온도는 보고된 다른 간접구와 유사하였으나 평균 도달시간은 더 길었다. $38^{\circ}C$에 도달하는 평균시간은 410초이고 지속 시간은 1,813초였다. $42-50^{\circ}C$에 도달하는 평균시간은 521초이고 지속시간은 990초였다. 결론 : 온구기는 연소 특성이 보고된 다른 종류의 뜸보다 더 오랜 시간 동안 안정적인 열자극이 가능하여, 뜸치료의 임상 활용의 폭을 높일 수 있을 것으로 사료된다.

• Journal of Bio-Environment Control
• /
• v.23 no.1
• /
• pp.39-42
• /
• 2014

The objective of this study was to estimate cardinal temperatures for germination of lettuce (Lactuca sativar L.) using bilinear, parabolic, and beta distribution functions. Seeds of lettuce were germinated in a growth chamber at 7 constant temperatures: 10, 14, 16, 20, 24, 28, and $32^{\circ}C$. Four replicates of 100 seeds were placed on two layers of filter paper in a 9 cm petri-dish. Radicle emergence of 1 mm was scored as germination. The time course of germination was modeled using a logistic function. These minimum, optimum, and maximum temperatures were estimated by regression of the inverse of time to 50% germination rate against the temperature gradient. In bilinear function, minimum, optimum, and maximum temperatures were $7.9^{\circ}C$, $23.3^{\circ}C$, and $28.0^{\circ}C$, respectively. In parabolic function, minimum, optimum, and maximum temperatures were $9.7^{\circ}C$, $19.5^{\circ}C$, and $29.4^{\circ}C$, respectively. In beta distribution function, minimum, optimum, and maximum temperatures were $3.7^{\circ}C$, $20.7^{\circ}C$ and $32.0^{\circ}C$, respectively. Minimum, optimum, and maximum ranges of temperatures were $3.7{\sim}9.7^{\circ}C$, $19.5{\sim}23.3^{\circ}C$, and $28.0{\sim}32.0^{\circ}C$, respectively.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.6
• /
• pp.449-458
• /
• 2016

The temperature data were measured for two years in a bridge specimen and the bridge in service nearby in order to calculate the effective temperature for thermal loads in steel box girder bridge. The maximum and minimum effective temperatures were calculated in the bridge specimen and the bridge according to air temperature in 2014, 2015 and 2years. The effective temperatures calculated in this study were compared the Euro code and the Highway Bridge Design Criteria. The coefficients of determination in the maximum effective temperature and the Euro code for 2 year were calculated from R = 0.927, R = 0.894 in a bridge specimen and the bridge respectively. Those of minimum temperature and the Euro code were analyzed from R = 0.992, R = 0.813 in two bridge respectively. Also, the results were evaluated as being very similar, or slightly increased as compared with the maximum temperature of the Korean Highway Bridge Design Code(Limit State Design).

• International Journal of Highway Engineering
• /
• v.7 no.3 s.25
• /
• pp.79-91
• /
• 2005

The temperature patterns in Portland cement concrete (PCC) pavements were measured and comprehensively analyzed from the beginning of the concrete placement based on the temperature measurement technique developed using innovative and inexpensive temperature measurement sensors. The temperature measurements in PCC pavements were taken at several different locations forvarious slab thicknesses. The concrete temperature patterns in the vertical and longitudinal directions of the pavement were analyzed and the effects of the pavement surface reflectivity, shading, and covering on the concrete temperatures were evaluated. The results of this study showed that the significant differences in the maximum concrete temperatures on the placement day were observed according to the concrete placement time. Since the zero-stress temperature is a function of the maximum concrete temperature on the placement day, the placement time would be an important factor that affects the behavior and performance of concrete pavements. The surface conditions of the pavement, such as the surface color, shading, and covering also affected the temperature patterns in PCC pavements significantly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.740-745
• /
• 2020

To calculate the reasonable design temperature load of a concrete box girder bridge, one bridge test specimen was made. The temperature gauges installed on the bridge test specimen measured 48 sets of temperature per day at 30-minute intervals during the summer and winter periods of one year. The temperature measured at each station was treated statistically to calculate the trend line and standard error, and the temperature distribution and trend line at the representative station were presented. The maximum effective temperature and the lowest effective temperature were calculated from the air temperature suggested by Euro code. The maximum effective temperature was calculated to be 1.5 to 2℃ higher than the Euro code at 35℃ and above. In comparison, the lowest effective temperature was 0.5 to 1.1℃ lower at -13℃ to-19℃. Compared to the effective temperature of this study according to the highest and lowest 50-year frequency of the Yangsan region, the highest effective temperature was 4.7℃ higher, and the lowest effective temperature was 4.5℃ lower. Considering the increasing climate change and reflecting the results of this analysis, it is deemed necessary to make the current temperature design standards larger.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.291-291
• /
• 2011

플라즈마에 노출된 재료 표면의 온도 증가는 다음과 같은 요인에 의해서 결정된다. 이온의 충돌에 의한 역학적 에너지, 이온의 중성화, 라디칼의 안정화에 의한 에너지 방출(잠열, latent heat), 플라즈마에서 방출된 빛의 흡수. 이중 식각을 위한 기판 바이어스에 의해서 주로 결정되는 이온 충돌 에너지와 잠열의 방출이 300 mm wafer용 유도 결합 플라즈마 식각 장치에서 소스 전력과 바이어스 전력에 따라서 어떻게 변화하는지 전산 유체 역학 모사 프로그램인 CFD-ACE를 이용하여 상용 식각 장비인 AMAT사의 DPS II를 대상으로 온도 분포의 변화를 계산하였다. 실험 결과와 비교를 위하여 다섯 곳에(상, 하, 좌, 우, 중심) 열전대를 부착한 온도 측정 웨이퍼를 기판의 위치에 설치하고 여러 가지 실험 조건에 대해서 온도의 변화를 측정하였다. Ar 10 mTorr에서 2열 병렬 안테나의 전력을 300 W에서 시간에 따른 온도의 변화를 측정하였다. 이때 wafer의 평균 온도는 $28.9^{\circ}C$에서 $150^{\circ}C$까지 12분 내에 상승하였으며 최고 온도에 도달한 다음에는 거의 일정하게 유지 되었다. Si의 식각에서 온도의 영향을 가장 크게 받는 반응은 F 라디칼에 의한 Si의 직접 식각이며 Arrhenius 식의 형태로 표현하면 0.116*exp (-1250/T)의 형태로 된다. 문헌에 보고된 계수를 이용해서 $29^{\circ}C$의 식각 속도와 플라즈마에 의한 가열 최고 온도인 $150^{\circ}C$ 때의 값을 비교해보면 3.3배의 차이가 난다. 따라서 4%내의 식각 균일도를 목표로 하는 폴리 실리콘 게이트 식각 장비의 설계에서는 플라즈마에 의한 가열 불균일을 상쇄 할 수 있는 히터와 냉각 구조의 최적 설계가 필요하다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.3
• /
• pp.351-357
• /
• 1983

To study the relationships between soybean seed yield and meteorological elements, the investigation into the important agronomic characters of Bongeui cultivar and climatic factors such as precipitation, rainy days, and temperature from 1970 to 1981 was made. The results obtained were summarized as follows: 1) Coefficients of variabilities for pod-filling rate, seed yield, number of pods per plant, and seed weight were about 38%, 30%, 30%, and 5.5%, respectively. 2) Weather conditions mainly in July and August influenced soybean production. Particularly, high temperature played an important role in soybean yield reduction. 3) Correlation coefficients between maximum, minimum, or average temperature of July (and, in the case of August, maximum temperature only) and yield or seed weight, and between those of August and podfilling rate were significantly negative. 4) Regression equations between average temperature of July or maximum temperature of August and yield were Y=-42.46X +1200.86 and Y=-37.95X + 1210.42, respectively. 5) High temperature during the flowering stage affected soybean seed yield reduction significantly.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.784_785
• /
• 2009

본 논문에서는 2[MVA]급 배전용 몰드변압기의 온도분포를 유한요소해석을 통하여 수행하였다. 몰드변압기의 온도상승한도와 허용최고온도를 전자기적 열원에 대한 분석을 통하여 계산하고 그 계산된 열원을 바탕으로 열적 해석의 열원으로 사용하여 계산하였다. 일반적으로 변압기의 수명은 내부의 전반적인 열적 특성보다는 특정 부위의 온도 분포에 의해 결정되며, 특히 변압기 내부 최고점의 온도(hot spot temperature)값이 허용치 이상으로 상승할 경우 절연내력의 저하로 인해 변압기의 수명은 급격히 감소한다. 이러한 수명개선을 위해 몰드 변압기의 철심과 고압.저압권선의 Joule's loss을 계산하여 열원을 계산하였고, 그 결과를 토대로 배전용 몰드변압기의 철심과 고압 저압권선의 온도상승 분포와 최고점의 온도분포를 예측하였다.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.283-294
• /
• 2011

The variation of temperature in the steel girder bridge by air temperature is measured. A correlation between the daily temperature range, the maximum and minimum temperatures of the day, and the temperature of the bridge are analyzed. With the statistical data from the Korea Meteorological Administration, the temperature correlations analyzed in this study is able to predict temperature variations between the upper flange and the lower flange which calculates the realistic displacement values of a movable support and an expansion joint in design.

• Resources Recycling
• /
• v.19 no.1
• /
• pp.21-26
• /
• 2010

In order to understand the microwave carbothermic reduction of steelmaking slag to recover Fe, the effects of gas atmosphere and carbon addition on the carbothermic reduction behavior of CaO-$SiO_2$-FeO slag were investigated. It was found that the maximum temperature and the reduction rate were higher in air than in nitrogen atmosphere. In addition, under air atmosphere, the maximum temperature and the reduction rate were increased by increasing the amount of additive carbon. When the carbon equivalent is 5, the maximum temperature reached as high as 1800K and the reduction rate was approximately 90%. As the Carbon equivalent increased further, the maximum temperature and the reduction rate did not change.