• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2009.04a
• /
• pp.321-322
• /
• 2009

항공기에 장착되어 1개 지점을 수직 및 경사각도로 5면에서 촬영하는 항공용 다각촬영 카메라를 비롯한 항공용 멀티센서는 항공기라는 공간상의 제약으로 인해 다양한 각도로 센서를 고정하기에 어려움이 있다. 또한 항공기 운항 중 기류변화등으로 인해 촬영예상 지역을 벗어나 촬영되기 쉽다. 이에 항공용 센서의 자세를 연직방향으로 유지 시켜주는 기존 항공용 마운트를 활용할 수 있으면서, 다양한 각도로 센서를 고정할 수 있는 장치를 개발하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.645-653
• /
• 2020

Recently studies on how to use the UAV (Unmanned Aerial Vehicle) are actively being conducted, and the National Geographic Information Institute published the 『Work Guidelines for Public Surveying of Unmanned Aerial Vehicles』. However, the guidelines do not provide the optimum shooting conditions required for each application. In this study, we tried to find the suitable shooting conditions for the production of 3D (Three-dimensional) spatial information and orthophoto. To this end, 45 experiments were conducted by various altitudes, overlaps, and camera angles within an above ground level of 150m. For evaluating the 3D modeling by shooting conditions, point densities of 9 verification areas were analyzed, and to evaluate the orthophotos, 1/1,000 digital maps were compared. Considering the quality of the output and the processing time for precise 3D construction, an altitude of 50m, an overlap of 70~80%, and a camera angle of 80~90° are suitable as shooting conditions, and an altitude of 100m and camera angle of 80~90° are suitable for orthophoto generation.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.103-103
• /
• 2003

공간해상도가 높고 영상 신호량의 증가를 위해 TDI(time delay and integration) 방식의 센서를 이용하는 저궤도 위성카메라의 경우 지구의 자전효과나 위성의 자세 불안정 등으로 인해 촬영된 영상의 퍼짐현상(smearing)이 나타난다. 본 연구에 따르면 선형운동에 의한 결과로 발생하는 영상퍼짐은 위성의 자세제어 특성 뿐 만 아니라 위성의 궤도 특성과 TDI 단계, 지상 촬영 지점의 위도 및 경사촬영 각도에 의해 결정되며 다목적 실용위성 2호(KOMPSAT2)의 탑재카메라를 실례로 살펴본 해상도 1m급의 태양동기궤도 위성의 경우 별도의 보정 과정이 없을 경우 영상의 퍼짐이 심각한 것으로 나타난다. 주된 원인은 지구의 자전효과이며 영상퍼짐의 정도는 위성 직하점의 위도에 따라 변하고 카메라의 경사촬영 각도와는 연관성이 작은 것으로 나타난다. 또한 촬영전에 자세제어를 이용해 카메라의 Yaw축 각도를 조정할 경우 영상퍼짐현상이 현저히 감소함을 보여준다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1998.06a
• /
• pp.127-130
• /
• 1998

3차원의 영상을 2차원 화면에 투영시키기 위해서는 영상에 대한 카메라의 촬영 각도와 촬영 거리를 일치시켜주어야 한다. 이를 위해서 다른 각도와 거리에서 촬영한 영상을 같은 각도와 거리에서 촬영한 영상으로 만들어 주는 변환을 만들었다. 그러나 이러한 변환을 하였을 때 디지털 영상은 경계부분이나 직선 등이 끊어지는 현상이 발생하게 된다. 본 논문에서는 변환된 영역에서의 정수 점에 원래 영상의 점을 바로 대응시키지 않고 주변 점의 다항식으로 나타낼 수 있다. 이 다항식의 계수를 정하는 방법으로 변환된 영역에서의 정수 점에 대응하는 원래 영상의 점을 구하여 2차 선형 보간법(Bilinear interpolation)을 사용하였다. 변환된 영역에서의 정수 점에 대응하는 원래 영상에서의 좌표를 얻기 위해 주변 4개의 점 내에서는 부분적으로 선형적임을 가정하였다. 위의 방법으로 주변 점들의 에너지를 각 정수 점들로 분산시킴으로써 경계 점이나 직선들이 잘 보존된 상태로 변환할 수 있었다.

• Journal of radiological science and technology
• /
• v.28 no.2
• /
• pp.91-95
• /
• 2005

The cervical spine of anteroposterior oblique view is essential to observe the intervertebral foramen(IVF). The morphologic changes of IVFs were proved to be abnormal with nerve roots and peripheral structures. The purpose of this study is to evaluate the effective projection angle for observing the IVFs in the Korean adults. In a prospective clinical study of 100 normal persons, $45^{\circ}$, $50^{\circ}$ and $55^{\circ}$ oblique views were compared by measuring the maximal transverse diameter of all the cervical IVFs. $45^{\circ}$ oblique views provided slightly better visualization of upper cervical level(C2-C3, C3-C4, C4-C5), but the lower cervical level(C5-C6, C6-C7, C7-T1) of IVF transverse diameters were substantially increased on the $55^{\circ}$ AP oblique projection. In the comprasion of mean differences between 8 obese person(BMI > 25) and 58 normal person(18.5 < BMI < 22.9) proved to be statistically not significant. Consequently this study shows that $55^{\circ}$AP oblique(tube angle $15^{\circ}$cephalad) view is optimal for evaluating the lower cervical IVFs.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.24 no.2
• /
• pp.317-326
• /
• 1994

Panoramic radiographs of a dry skull were used to evaluate the accuracy of four panoramic dental X-ray systems in determining tooth angulations in the buccal segments. The four machines evaluated were the Philips Oralix Pan DC, the GE panelipse, the SS White panorex 1, and the SS White Panorex 2. Panoramic radiographs were taken at six different patient positions for each machine to evaluate the effects of patient positioning on determining tooth angulations in the buccal segments. All of the machines studied showed a significant correlation between the mean radiographic estimates and the actual measurements regardless of positioning(p<0.05). With correct placement of the skull, the results were analyzed for an error tolerance of +/-3/sup 0/ between the actual measurements and the radiographic estimates for tooth angulation. The SS White Panorex 1 was accurate 74% of the time, the GE Panelipse was accurate 67% of the time, the Philips Oralix Pan DC and the SS White Panorex 2 were accurate 64% of the time. When an error tolerance of +/-5/sup 0/ was permitted, the accuracy was 89% for the SS White Panorex 1 and the GE Panelipse, 85% for the Philips Oralix Pan DC, and 81% for the SS White Panorex 2.

• Journal of the Korean Society of Radiology
• /
• v.7 no.4
• /
• pp.271-275
• /
• 2013

Shoulder bone scan everyday life, sports activities at the side of the shoulder joint, or applying strong force in the lateral occurs. Mainly on upper arm abduction, temple, other rotational dislocation of the shoulder joint gahaejyeo as useful for observing the presence or absence of lesions is used. Shoulder PA oblique projection prevent distortion of the image due to the angle and the most useful diagnostic radiological investigate shooting angle. Shoulder blade body and the acromion and coracoid process Y-view is formed characters. $10^{\circ}$ angle between the shoulder blades and the acromion is the obstruction. $20^{\circ}{\sim}25^{\circ}$ to the Y-view of the humerus head looks superimposed, the position of the shoulder joint and seemed appropriate. $35^{\circ}$ of the humerus head superimposed on the Y-view, but above the humerus head and shoulder joints were distorted. When $45^{\circ}$ elevation observed on the side of the best has come Y-view also acromion and coracoid process is finished.

• Journal of The Korean Radiological Technologist Association
• /
• v.29 no.1
• /
• pp.95-95
• /
• 2003

• Journal of The Korean Radiological Technologist Association
• /
• v.28 no.1
• /
• pp.343-344
• /
• 2002

• Journal of the Korean Society of Radiology
• /
• v.13 no.3
• /
• pp.425-431
• /
• 2019

The Study In order to obtain images of overlap of the two iron cores in the spinal cord simple x-ray scan after surgery of patients with ulcer lateral sclerosis and a fractured backbone, the researcher conducted a subjective evaluation on five radiographers of the university hospital's imaging department for more than 10 years. The results of the experiment showed that the lateral shot of lateral scoliosis of the spinal cord was taken with the middle face of the IR plane, and then the X-ray tube angle was taken vertically with the vertical spinal column fan-tom position, resulting in two overlapping images and high scores in the subjective evaluation. In addition, lateral shots of the lumbar dislocation fractured lumbar vertebrae were taken with the forehead aligned with the center of the IR plane and then with the X-ray angle perpendicular to the fourth waistline and the angle of the spinal cord perpendicular to the fourth waistline, the image of the two iron cores could be obtained from the radiographer.