• Environmental and Resource Economics Review
• /
• v.26 no.2
• /
• pp.173-203
• /
• 2017

The existence of rebound effect from road extension in Korea has been quantitatively verified using cross-sectional, time series data on four major cities - Seoul, Busan, Daegue and Incheon - between 2000 and 2013. The linear mixed effects model was constructed from six variables: total vehicle miles traveled (VMT), road extension, public transport users, gross regional domestic product (GRDP), regional population and fuel consumption. The main results can be summarized as VMT is positively correlated to road extension while negatively with public transport users. It indicates that the road extension-centered "supply-side" transportation policy induces "additional travel" and create "generated traffic" by enhancing driving efficiencies directly, or degrading other transport modes indirectly. Hence, the ultimate goal of road congestion reduction requires public transport-centered "demand management" rather than current supply-side policies.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.2
• /
• pp.247-256
• /
• 2012

Recently, estimation of greenhouse gas (GHG) emission has continuously emerged as an important global issue. This study compares various statistical methods for estimation of fuel consumption, which is necessary for calculation of GHG emission in road transportation sector. Existing methods have focused on using merely transportation fuel supply or distance traveled for calculation of fuel consumption. Estimates of GHG emission based on fuel supply, however, cannot reflect various vehicle types or model year. This study suggests and compares, from statistical point of view, several methods, which can be applied to estimate fuel consumption of each vehicle, by combining distance traveled and fuel efficiency (mileage), and total fuel consumption of all vehicles. It also suggests practical measures that can reflect vehicle types and model year to suggested methods for future research.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3879-3887
• /
• 2014

This paper presents a model to estimate the amount of $CO_2$ emitted by cars in cities. Based on the spatial configuration of street networks, building masses and usages, it first develops a deductive model to combine them in a way to account for $CO_2$ emission amount by cars. It then proceed to validate model behaviours through a series of simulations on some ideal urban settings and finally calibrate it following its real application to the five case study cities in Korea. In contrast to the conventional 'top-down' approaches, we expect our model to have high utilities, particularly in the field of urban planning and design, where we cannot but deal directly with the spatial configuration of urban components and microscopic human activities.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.599-607
• /
• 2006

텔레매틱스 정보단말기는 가독성, 시인성, 주행 안전성의 사용성과 HMI(Human Machine Interface)를 고려하여 설계해야 한다. 텔레매틱스 정보단말기 GUI을 구성하는 요소로 Menu Type, Menu Structure, Font Size 등이 있다. 그러나 한글이라는 지역적 특성에 대한 연구가 미흡한 상태이다. 따라서 본 연구에서 국내 운전자를 대상으로 텔레매틱스 정보단말기 GUI Factor에 대해 국내의 환경에 맞는 설계를 도출하였다. 피험자는 총 30명(남자 24명과 여자6명)을 대상으로 가상 주행 시스템을 이용한 시뮬레이션 환경에 Task를 수행하도록 하여 실험을 하였다. 분석은 ANOVA, 다원배치법, T-test, Font 일반식 대입을 통해 이루어졌다. Menu Type은 가로세로 2*3 배열의 형태와 버튼간 간격을 주행안전성 및 시인성에서 고려하여 설계해야 한다. Menu Structure는 3Depth가 3Frame 보다 주행안전성 및 시인성이 5%유의수준에서 더 우수하다고 나타났다. 운전자 안구 거리에 따른 Font Size를 도출하는 일반식은 어두운 글자인 경우 0.0069radian * d = Font Size 가 되고, 밝은 글자인 경우 0.0075radian * d = Font Size 가 된다. 위와 같이 본 연구는 GUI 세가지 항목에 대하여 국내 운전자의 사용성과 텔레매틱스 정보단말기 간의 인터페이스를 고려하여 기존의 시스템에 대하여 에러를 줄이고, 수행능력을 향상 시켜 주었다.

• Journal of the Korean Society for Railway
• /
• v.17 no.3
• /
• pp.165-170
• /
• 2014

The resistance to motion of the Korean next-generation high-speed train (HEUM-430X) was assessed on the basis of 12 coasting test runs at coasting speeds up to approximately 380km/h. Two different methods, a linear regression method and a time-integral method, were employed to calculate decelerations from the time-velocity data and the time-distance data, respectively, and an equation of resistance to motion was devised from the deceleration data calculated at each time section. The effect of an improvement of the aerodynamic shape on the resistance to motion was investigated, with the results showing that the running resistance was reduced by about 15% due to these improvements. An increase of approximately 28% of the running resistance was also noted when running in a tunnel relative to running through an open field.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.93-99
• /
• 2012

This study analyzes traffic data which are collected by VDS(Vehicle Detection System) to research the relationship between spacing distribution and vehicles' relative speed. The collected data are relative speed between preceding and following vehicles, passing time and speed. They are also classified by lane and direction. For the result of the analysis, in the same platoon, we figure out that mean of spacing is 40m, which can be a value to determine section A to D. To compare spacing according to time interval, this study splits time intervals to peak hour and non-peak hour by peak hour traffic volume. In conclusion, vehicles in peak hour are in car following because most drive similar speed as preceding vehicle and they have relatively small spacing. On the other hand, non-peak hour's spacing between vehicles is bigger than that of peak hour. This implies driver's behaviors that the less spacing, the more aggressive and want to reduce their travel time in peak hour, whereas most drive easily in non-peak hour and recreational trip purpose because of less time pressure.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.153-153
• /
• 2017

본 연구에서는 농작업지내 모서리 점을 이용하여 자율주행 트랙터의 경로점을 생성하는 알고리즘을 개발하였다. 작업지는 직사각형의 형태에서 거리가 긴 방향으로 직선주행 경로로 하고, 직선경로의 수는 작업폭에 의해 결정되며 홀수 또는 짝수 개일 수 있다. 또한 TM좌표계에서 직선주행 경로의 기울기는 양수 또는 음수 일 수 있으며, 선회시 전체적으로 좌회전 또는 우회전하는 경우로 구분하여, 즉 총 8가지의 경우에 대하여 조건이 주어지면 경로점을 구할 수 있도록 프로그램하였다. 선회를 위한 곡선경로 생성에는 트랙터의 최소 회전반경 데이터를 사용하였으며, 이때 새로 진입할 다음 경로가 충분히 떨어져 있는 경우에는 선회 구간에서도 직선 경로 구간이 생길 수 있음을 고려하였다. 한 주기의 경로점은 직선 경로 구간의 시작점과 끝점, 선회 구간의 시작점과 끝점, 다음 직선경로로 진입을 위해 선회하기 직전까지의 직선 구간에 대한 시작점과 끝점 등 6가지의 경우로 구분할 수 있다. 이때 어떤 끝점 경로점은 다음 조작 구간의 시작점 경로점이 되므로 최종적인 경로점 데이터는 4개가 된다. 여기서, 첫 번째 경로점 생성에서는 직선구간 진입을 위한 선회구간의 시작점과 끝점은 제외하였으며, 작업지로 진입할 수 있는 입구와 출구는 동일한 것으로 가정하여, 작업이 완료되는 지점에서 선회하여 다시 출발점으로 돌아올 수 있도록 추가 구성하였다. 실제 상황에서는 직선주행 경로의 수가 정수가 되지 않을 수 있으며, 이때는 작업 구간이 약간씩 오버랩되도록 작업폭을 조정하여 경로의 수가 항상 정수가 되도록 하였다. 알고리즘 평가에 사용된 작업 패턴은 관행적인 방법으로서 작업 포장을 반으로 나누어 8자형 패턴을 이용하였다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.3
• /
• pp.1-11
• /
• 2000

This study was analysed the characteristis of traveling vehicles using the collected data by DGPS receiver. These data were checked the vehicle position in every 2 seconds and compared with GIS digital map after correcting the errors. These are compared travel speed and running speed overall and analysed the stopping vehicle in the middle of travelling. The stopping frequency, stopping time and stopping factor was analysed. The X, Y coordinates positioning of DGPS received data about stopping vehicle was analysed. DGPS receiver didn't position at first but positioned it exactly as time went. This study carried out the basic study about travel characteristics with digital map and DGPS received data. Few studies which applied advanced technology like GIS & DGPS have been executed. I hope that the more study will be executed in this traffic field.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.575-583
• /
• 2017

This paper describes the design and evaluation of a driving mode decision algorithm for automated driving for merge situations on highways. For the development of a highly automated driving control algorithm for merge situations, the driving mode decision is crucial for merging appropriately. There are two driving modes: lane keeping and lane changing (merging). The merge mode decision is determined based on the state of the surrounding vehicles and the remaining length of the merge lane. In the merge mode decision algorithm, merge possibility and the desired merge position are decided to change the lane safely and quickly. A safety driving envelope is defined based on the desired driving mode using the information on the surrounding vehicles' behaviors. To obtain the desired steering angle and longitudinal acceleration for maintaining the subject vehicle in the safe driving envelope, a motion planning controller is designed using model predictive control (MPC), with constraints that are decided considering the vehicle dynamics, safe driving envelope, and actuator limit. The proposed control algorithm has been evaluated via computer simulation studies.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.183-193
• /
• 2009

Air pollution due to vehicle exhaust gas is considered to be a main contributor to the issues of transportation & environment. Furthermore it is raising concern over life quality and public health and is also perceived as a global issue. This research aims at providing helping hands for both central and local governments to set up and promote efficient atmospheric quality improvement policies, with the help of the travel demand forecasting model and GIS. More specifically, it tries to produce the overall emission level with time and space-based high resolution framework. This research, based on bottom-up approach reflecting vehicular traffic characteristics, suggested an improved approach to estimating emission level, by using a traffic model with a total of vehicular mileage revised by surveyed value and atmosphere model. Summing up, using the method proposed, the improvement of the reliability of the emissions inventory from the mobile pollutions sources is expected by the proposed integrated paradigm of transportation and atmosphere modeling approach as a new alternative.