• Title/Summary/Keyword: 총 변형량

Search Result 98, Processing Time 0.024 seconds

A Convergent Study on Impact Analysis due to Existence or Non-Existence of Smart-phone Case (스마트폰 케이스의 유무에 따른 충격해석에 관한 융합 연구)

  • Choi, Kye-Kwang;Cho, Jae-Ung
    • Journal of the Korea Convergence Society
    • /
    • v.11 no.10
    • /
    • pp.225-229
    • /
    • 2020
  • In this study, the deformation and stress on each model was analyzed and the strength was compared with each other when the impacts on a total of four smart phone models was given. Models B and D with cases can be seen to have less deformation and stress than models A and C without cases. The models including the case have higher masses than the models without the case. So, the deformation and stress can be reduced by absorbing the impact force. In addition, the masses of models C and D are smaller than models A and B, but the stresses and deformations are seen to be smaller. If a case specialized for edge protection is chosen and designed when manufacturing a smart-phone in order to absorb the shock while weighing less, it is thought to improve the strength of the smart-phone and increase the durability. And it is seen that this study is adequate at the efficient design with durability of smart phone case practically and the aesthetic convergence of smart phone.

Effects of 3-D Fracture Tensor Parameters on Deformability of Fractured Rock Masses (삼차원 절리텐서 파라미터가 절리성 암반의 변형특성에 미치는 영향)

  • Ryu, Seongjin;Um, Jeong-Gi
    • Tunnel and Underground Space
    • /
    • v.31 no.1
    • /
    • pp.66-81
    • /
    • 2021
  • The effects of directional fracture tensor components and first invariant of fracture tensor on deformation moduli and shear moduli of fractured rock masses is analyzed based on regression analysis performed between 3-D fracture tensor parameters and deformability of DFN blocks. Using one or two deterministic joint sets, a total of 224 3-D discrete fracture network (DFN) cube blocks were generated with various configurations of deterministic density and probabilistic size distribution. The fracture tensor parameters were calculated for each generated DFN systems. Also, deformability moduli with respect to three perpendicular direction of the DFN cube blocks were estimated based on distinct element method. The larger the first invariant of fracture tensor, the smaller the values for the deformability moduli of the DFN blocks. These deformability properties present an asymptotic pattern above the certain threshold. It is found that power-law function describes the relationship between the directional deformability moduli and the corresponding fracture tensor components estimated in same direction.

Finite Element Analysis on Contact and Work Stress of Rolled Strip (압연되는 스트립의 접촉 및 가공 응력에 대한 유한 요소 해석)

  • Cho, Jae-Ung;Han, Moon-Sik
    • Transactions of the Korean Society of Machine Tool Engineers
    • /
    • v.17 no.2
    • /
    • pp.23-29
    • /
    • 2008
  • This study analyzes the rolled circular rod strip with radius of loom and length of 350cm by using finite element analysis. The material strength and its durability of the rolled strip can be predicted through this study. As the penetration tolerance by contact decreases, the contact rigidity of strip increases. As the contact rigidity becomes the highest at the elapsed time of 1.2 second, the contact stress becomes the lowest. On the contrary, von-Mises stress becomes highest at this time. The total deformation on strip increases from the upper part of strip at the position near to rotating roll to the lower part of strip at the position near to fixing roll.

Out-of-plane Deformation Measurement of Spherical Glasses Lens Using ESPI (ESPI를 이용한 구면 안경렌즈의 면외 변형 측정)

  • Yang, Seung-Pill;Kim, Kyoung-Suk;Jang, Ho-Sub;Kim, Hyun-Min
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.12 no.4
    • /
    • pp.77-81
    • /
    • 2007
  • The spherical lens is typically classified by the refractive power into two groups such as (+) diopter lens and (-) diopter lens. The deformation occurred by the external force that is applied to a lens is caused by the increase or the decrease in the diopter of a lens. In this paper, the deformation of the lens was quantitatively measured by using ESPI (Electronic Speckle Pattern Interferometry) which have been used in the optical measurement field for past few years. ESPI has an advantage that the deformation of an object can be measured precisely by using coherence of the light. The experiment was carried out to the totally 16 types of plastic lens. It was confirmed that the deformation was decreased by increasing the diopter of the lens when same displacement was applied to the lens in case of (+) diopter lens and was increased by decreasing the diopter of the lens in case of (-) diopter lens. Also, it was found that the deformation of (+) diopter lens is less than that of (-) diopter lens. Therefore, with these results, it is expected that the possibility of the quantitative measurement for variation of the optical defect caused by the deformation of a lens when the deformation is occurred to the various types of the lens can be presented and that the application in the lens industrial field can be performed.

  • PDF

Convergence Technique Study of Model Tie Rod End by Configuration through Simulation Analysis (시뮬레이션 해석을 통한 형상 별 타이로드 엔드 모델의 융합 기술 연구)

  • Lee, Jung-Ho;Cho, Jae-Ung
    • Journal of the Korea Convergence Society
    • /
    • v.7 no.1
    • /
    • pp.161-166
    • /
    • 2016
  • Deformation, stress and fatigue life due to the configuration of tie rod end are investigated in this study. Tie rod ends with the total three kinds of configurations are modelled with three dimensions through CATIA program and the simulation analysis is carried out with the ANSYS finite element analysis program. There are the models of A, B and C by the configuration of the rod end. As this study result, maximum deformation, maximum equivalent stress and maximum fatigue life of A type model are shown to be 0.0614mm, 160.27MPa and 336,930cycles respectively. And maximum deformation, maximum equivalent stress and maximum fatigue life of B type model are shown to be 0.0648mm, 90.889MPa and 1,171,000cycles respectively. Maximum deformation, maximum equivalent stree and maximum fatigue life of C type model are also shown to be 0.0402mm, 84.794MPa and 20,000,000cycles respectively. The durability of the models of tie rod ends through the values of this result could be estimated and the data for the design and development of more improved tie rod end could be secured. And it is possible to be grafted onto the convergence technique at design and be shown as the esthetic sense.

Numerical Modeling of Shear Heating in 2D Elastoplastic Extensional Lithosphere using COMSOL Multiphysics® (콤솔 멀티피직스를 이용한 2차원 탄소성 인장 암석권 모형에서 발생하는 전단열에 관한 수치 모사 연구)

  • Jo, Taehwan;So, Byung-Dal
    • Geophysics and Geophysical Exploration
    • /
    • v.23 no.1
    • /
    • pp.1-12
    • /
    • 2020
  • In the development of geodynamic structures such as subduction and rift zones, a weakening mechanism is essential for localized weak zone formation in the lithosphere. Shear heating, a weakening mechanism, generates short-wavelength temperature elevation in the lithosphere; the increased temperature can reduce lithospheric strength and promote its breakup. A two-dimensional elastoplastic extensional basin model was used to conduct benchmarking based on previous numerical simulation studies to quantitatively analyze shear heating. The amount of shear heating was investigated by controlling the yield strength, extensional velocity, and strain- and temperature-dependent weakening. In the absence of the weakening mechanism, the higher yield strength and extensional velocity led to more vigorous shear heating. The reference model with a 100-MPa yield strength and 2-cm/year extension showed a temperature increase of ~ 50 K when the bulk extension was 20 km (i.e., 0.025 strain). However, in the yield-strength weakening mechanism, depending on the plastic strain and temperature, more efficient weakening induced stronger shear heating, which indicates positive feedback between the weakening mechanism and the shear heating. The rate of shear heating rapidly increased at the initial stage of deformation, and the rate decreased by 80% as the lithosphere weakened. This suggests that shear heating with the weakening mechanism can significantly influence the strength of relatively undamaged lithosphere.

A Study on Improvement Effects on Fractured Rock Mass by Consolidation Grouting in Tunnel (터널 내 파쇄지반 개량을 위한 압밀그라우팅 성능 평가 연구)

  • 정교철;서용석
    • The Journal of Engineering Geology
    • /
    • v.12 no.2
    • /
    • pp.189-202
    • /
    • 2002
  • In this study we carried out the in situ test in order to explore the grouting effects of fracture zone on mechanical properties and permeability in tunnel. After consolidation grouting the rock mass averaged 2.30 in the modulus of deformation and 2.49 in the modulus of elasticity. The results obtained through this study are as follows. (1) With advance of the injection steps, the total cement take shows uniformity of the rock mass. (2) After consolidation grouting the improvement of permeability can be identified by reduction of Lugeon values. (3) Grouting injection can improve deformability and strength of rock mass. (4) More mechanical improvement appears for more deformable rock mass before grouting injection.

Effects of Modified ultrafiltration at cardiopulmonary bypass animal experiment. (심폐바이패스 실험동물에서의 변형 초여과법 사용의 효과)

  • 한재진;원태희;박성수
    • Journal of Chest Surgery
    • /
    • v.32 no.10
    • /
    • pp.874-882
    • /
    • 1999
  • 배경: 체외순환 후의 부종현상 및 이에 따른 여러 장치의 기능 저하를 방지하기 위하여, 최근에 체외 순환 이탈 후 환자의 혈액을 짧은 시간에 관류하여 여과해 주는 변형 초여과법의 사용이 늘고 있다. 이에 대한 긍정적인 임상결과들의 보고도 있으나, 다른 한편 체외 순환 후 염증반응을 포함한 폐손상의 기전에 혈구 성분의 영향이 보고되고 있는 바, 변형 초여과법의 효과, 특히 폐 조직에 대한 영향을 밝혀 보고자 하였다. 대상 및 방법: 몸무게 15에서 22 Kg(평균 16.5$\pm$0.5)의 16 쌍의 잡견을 이용한 정소성 심장이식, 실험에서, 통상적인 인공심폐기 작동군과 인공심폐기 작동 후 변형 초여과 관류를 시행한 군으로 무작위 구분하였다. 변형초여과법은 체외순환 정지 후에 대동맥관에서 나온 혈류를 Roller pump를 거쳐 Amicon Diafilter 초여과 관에 150 mL/m 정도의 속도로 10~15 분 정도 관류시켜 정맥관을 통하여 우심방에 직접 주입하였다. 혈액 채취 및 폐생검은 심폐기 시작 전과 정지 직후, 그리고 변형초여과 시행 군은 초여과 완료 직후에, 대조군은 심폐기 정지 10~15분 후에 각각 시행하였다. 혈류역학 측정요소는 동맥압, 우심방압, 좌심방압 등이었으며, 혈액 검사 항목은 동맥혈 가스분석, 혈색소 농도, 헤마토크릿, 백혈구 수, 혈소판 수, 혈중 단백 성분, 알부민 성분 등이었다. 폐 생검 조직으로는 냉동 건조법을 이용한 수분 함유량을 측정하였고, 광학 및 전자현미경으로 관찰을 하였다. 결과: 변형 초여과 군에서 혈중 혈색소 농도는 수술전 10.3$\pm$1.7 mg/dL, 심폐기 정지 직후 6.3$\pm$1.7 mg/dL, 초여과 직후는 8.3$\pm$2.8 mg/dL의 변화를(p=0.0078, 0.0117), 혈중 총 단백질의 농도 변화는 4.3$\pm$0.9, 3.1$\pm$1.5, 4.1$\pm$1.6 mg/dL, 혈중 알부민의 농도는 1.9$\pm$0.5, 1.4$\pm$0.7, 1.8$\pm$0.8 mg/dL로서, 각각 초여과법의 시행 전후에 유의한 증가를 가져왔고(p=0.0280, 0.0277), 폐조직의 수분 함유량의 변화는 수술전 75.1$\pm$8.6%, 심폐기 정지 직후 82.8$\pm$6.0%, 초여과 직후 77.88%를 보인 반면, 대조군에서는 각각 74.7$\pm$4.9, 82.1$\pm$5.9, 82.3$\pm$5.1%의 변화를 보였다. 미세 구조의 관찰에서, 폐포의 내포세피의 융합 기저막층과 미토콘드리아에서의 부종은 변형 초여과 후에 급격히 감소하였으나, 미토콘드리아내 크리스티의 파괴성 변화와 막성 파괴 성향이 초여과 후에 심화되게 관찰되었고, 세포질 내 소체의 팽창과 공포화 현상도 심폐기 가동 후 발생하여 초여과 후에 더 심화되게 관찰되었다. 세포질 내 소체의 팽창과 공포화 현상도 심폐기 가동 후 발생하여 초여과 후에 더 심화되게 관찰되었다. 폐조직 내의 백혈구는 심폐기 작동 후에 그 수에 있어서 증가하였으며 백혈구의 괴변, 탈과립 정도도 심폐기 작동 후 및 초여과 후에 증가한 소견을 보였다. 결론: 변형 초여과법은 인공 심폐기 후의 혈색소 농도 및 혈중 단백질 농도의 복원에 효과가 있었으며 변형 초여과 관류후 폐의 미세 조직내에서 부종의 급격한 감소 등을 관찰할 수 있었다.

  • PDF

부산신항 사석층 침하를 고려한 안벽기초의 침하량 분석

  • Gang, Yeon-Ik;Jeong, Jong-Beom;Yang, Sang-Yong
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2007.12a
    • /
    • pp.176-178
    • /
    • 2007
  • 부산신항 북컨테이너터미널 민차부두 1단계 공사에 적용된 안벽기초는 하부 대섬도 연약점토층 개량을 위한 SCP(Sand Compaction Pile) 개량층과 그 상부에 약 6m정도의 사석층으로 구성되어 있다. 안벽은 케이슨식으로 상부의 크레인 풍의 공용하중 작용시에 발생이 예상되는 안벽기초의 과도한 지반침하 방지를 위해 근고블럭에 의한 Preloading 공법이 적용되었다. 따라서, 프리로딩에 의한 하부기초지반의 침하관리가 중요 공사관리 포인트가 된다. 그러나, SCP층이나 사석총에 대한 침하량 예측은 반경험적 방법에 의존하기 때문에 실제와 상당한 차이가 발생하게 된다 본 연구에서는 사석층의 진동다짐에 의한 시공 특성을 반영하기 위해 굴착치환구간의 사석층에 대한 실측값을 이용하여 Terzaghi 변형식의 침하계수 a를 재산정하여 SCP개량구간에 적용함으로써 보다 합리적인 안벽기초의 침하량을 분석하였고 이를 사석층의 여성고 산정에 이용하였다.

  • PDF

Leisure Time Physical Activity and its Relationship to Coronary Risk Factors in Male Workers (성인남성 근로자의 여가시간 중 육체적 활동양상 및 관상동맥질환 위험인자들과의 관련성)

  • Rho, Yun-Kyeong;Yeh, Min-Hae;Lee, Sung-Kook;Chun, Byung-Yeol
    • Journal of Preventive Medicine and Public Health
    • /
    • v.26 no.3 s.43
    • /
    • pp.332-346
    • /
    • 1993
  • This study was attempted to observe leisure time physical activity pattern and its relationship to coronary risk factors (BMI, systolic blood pressure, diastolic blood pressure, serum total cholesterol, triglycerides, fasting blood sugar). Subjects participated in this study were 277 adult male workers of an industry in Kyungpook province, Korea. Energy expenditure were measured using modified Physical Activity History questionnaire of CARDIA study by interviewing. Serum total cholesterol, triglycerides and blood sugar level were tested with 5 ml fasting blood and height, weight and blood pressure were masured. Data on smoking and drinking habits and others were obtained. Geometric mean of leisure time physical energy expenditure were estimated as 212.80 kcal per week for study subjects and only 22.4% of them expended 2,000 kcal or more per week in leisure time physical activity. Taking walks or hikes and jogging or running were more frequent leisure time physical activities in study subjects. Statistically significant mean differences in total weekly leisure time physical activity for all coronary risk factors were not found among three groups. Because energy expenditure of leisure time was generally low in this subjects and most of them were healthy men, we did not found that leisure time physical activity was significantly associated with coronary risk factors.

  • PDF