• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.613-617
• /
• 2000

This paper descries the effect of the stylus tip size on the measuring error in surface topography measurement. To analyze the distortional effect of an actual surface geometry originating from the finite stylus size, the surface is modeled as a sinusoid and the stylus tip as a circle. the measuring error is defined as the ratio of the standard deviation of a tracing profile and an original profile. It is shown that this measuring error depends on the amplitude and wavelength of an original profile. In this paper, the spectrum analysis is applied to investigate the distortional effect due to the mechanical filtering of the stylus in the frequency domain. and, the cumulative power spectrum is applied to determinate the minimum wavelength limits to be measured with the various stylus tip radius from these results, a new method to select proper stylus tip radius is proposed.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.174-181
• /
• 1999

This paper describes the effect of the stylus tip size on the shape error in surface topography measurement. To analyze the distortional effect of an actual surface geometry origination from the finite stylus size, the surface is modeled as a sinusoid and the stylus tip as a circle. The magnitude of this distortion is defined as the ration of standard deviation, and this is expressed as an analytic function of the stylus tip radius and the geometrical parameter of a sinusoid. In this paper, the spectrum analysis of the profile is applied to investigate the distortional effect due to the mechanical filtering of the stylus in the frequency domain. and, the cumulative power spectrum is proposed to assess the shape error of measured data according to the various stylus tip sizes. From these results, a new method to select proper stylus tip radius is proposed.

• 한국생산제조학회지
• /
• 제8권1호
• /
• pp.126-134
• /
• 1999

In this paper, a new error compensating technique for form-error compensation of rough-surface profile obtained by contact stylus profilometer is proposed. By the method, the real contact points of rough-surface and diamond stylus can be estimated and the measured profile data corrected. To verify the compensation effect, the properties(Ra, RMS, Kurtosis, Skewness) of measured profile data and compensated data were compared. And, the cumulative RMS slope was proposed to assess the compensated effect of upper area of profile. The results show that the measuring error could be compensated very well in amplitude parameters and in proposed cumulative RMS slope by the developed form-error compensating technique.

• 한국광학회지
• /
• 제16권4호
• /
• pp.361-365
• /
• 2005

표면거칠기가 큰 가공면의 표면형상을 비접촉 고속 측정 하기 위해 고안된 점광원 절대간섭계는 점광원의 위치가 시스템 변수로 정의된다. 시스템 오차인 점광원의 위치 오차가 측정 결과에 미치는 영향을 분석하며, 이를 보정하기 위해 CCD 카메라를 이용한 보정법을 제안한다. 제안된 방법을 검증하기 위해 기준면을 측정하여 측정 정밀도의 향상을 확인하며, 이를 거친 표면형상의 특징을 가진 칩모듈 측정에 적용하였다. 측정 결과 기존의 촉침식 측정기와 $50mm{\time}50mm$의 영역에서 $9.8{\mu}m$의 측정 차이를 보임을 확인하였다.