• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.92.2-92.2
• /
• 2011

차세대 에너지로 연료전지가 각광을 받고 있는 현재, 세계 각국에서는 연료전지의 상용화를 위해 노력하고 있다. 그러나 촉매분야에서 백금계 촉매의 사용량의 문제에 따른 매장량 한계점과 귀금속이라는 문제점이 존재하기 때문에 이에 대하여 대책강구가 필요한 시점이다. 이에 백금 촉매의 활성을 증대하고자 나노 크기의 제어 연구가 진행되고 있다. 또한, 촉매의 구조적인 면에 따라 촉매의 활성이 달라지는 점을 착안하여 백금계의 나노 형상 조절 연구와 백금계 촉매를 대체할 비백금계의 촉매 개발 연구가 활발히 진행되어지고 있다. 이에 본 연구는 백금계 촉매 중 Pd을 polyol process에 의한 나노 형상 조절을 통하여 단위 질량당(or 단위 부피당)촉매의 활성을 높이고자 하였다. 여기서 새로이 도입된 환원제는 Glycerol을 이용하였으며, {111}면이 많이 드러난 Pd 나노입자를 형성하였다. 이에 따라 나노 형상 조절이 된 Pd촉매를 이용하여 상용화된 촉매(Pd/C(XC-72R))에 비하여 전기화학적인 특성의 차이와 Pd 촉매의 촉매적 특성의 효과를 보고자 한다.

• Clean Technology
• /
• v.16 no.4
• /
• pp.265-271
• /
• 2010

The deactivated diesel oxidation catalyst(DOC) was remanufactured by ultrasonic wave treatment with various solutions, followed by active component re-impregnation. The catalytic performance and surface properties of remanufactured DOC were studied at various remanufacturing conditions. The proper ultrasonic-wave cleaning time at various solutions and optimal re-impregnation amounts of active component for the best catalytic performance were investigated. The catalytic performance tests on the conversions of CO and THC(total hydrocarbon) were also carried out at various temperatures by catalytic reaction test unit using bypass gas from the diesel engine dynamo system. It was found that the catalytic performance of DOC remanufactured with the high-temperature air washing, ultrasonic wave cleaning at acidic/basic solutions and active component re-impregnation method was recovered to 90% level of its activity compared to that of the fresh DOC, which was caused by removing the deactivating materials from the surface of the DOC through the analyses of catalyst performance test and their characterization by Optical microscope, EDX, ICP, TGA, and porosimeter.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.421-422
• /
• 2000

VOCs 처리기술로는 촉매연소, 열적처리, 생물학적처리법 등이 있으며, 촉매연소방법의 경우 저온에서 처리가 가능하여 처리비용 절감 등의 효과를 고려할 때 가장 경제적인 방법으로 평가되고 있다(Guisnet, et al., 1999). VOCs 처리에는 대부분 고가의 귀금속촉매를 많이 사용하므로, 경제적 부담을 줄이기 위하여 귀금속을 담체(SiO$_2$, A1$_2$O$_3$, TiO$_2$등)에 담지시켜 활용하거나, 귀금속촉매를 대체하기 위한 Mn, Co, Cu 등의 금속 산화물 촉매에 대한 연구가 활발히 진행되고 있다. (중략)

• Journal of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.656-663
• /
• 1985

A catalytic conversion of carbon monoxide has been studied in a coal combustion system. Three different catalysts were prepared by impregnating 0.2% platinum on three different types of supports, ${\gamma}-Al_2O_3$ pellets, ceramic foam and honeycomb. These catalysts have shown an excellent initial activities in the coal combustion system, but they were rapidly deactivated in repeated uses. Among these catalysts ceramic foam has shown to be better than others both in activities and durabilities. The main cause of deactivation seems to be ascribed to poisoning by zinc metal and sulfur compounds and to decrease in platinum surface area by sintering.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.3
• /
• pp.309-316
• /
• 2007

조합 및 고속탐색 실험 기법을 촉매 성분의 선정에 활용하였다. 소형 연료전지 작동을 위한 수소 생산에 가장 적합한 것으로 알려진 메탄을 산화 분해용 촉매의 특성을 적외선 화상 및 병렬형 반응 시스템으로 조사하였다. 반응의 모델을 먼저 제시하고 이를 근거로 Cu-Zn-Pd계 촉매를 선정하였다. 먼저 적외선 화상을 이용한 스크리닝을 위해서는 발열 효과라는 촉매 활성의 간접적인 현상을 보여줄 수 있는 적외선 민감 카메라를 이용하여 한 번에 50개의 시료 측정이 가능한 촉매 시료 배열을 설계하였다. 적외선 화상 결과로 높은 활성을 보이는 촉매 시료를 선정한 다음, 병렬형 반응 시스템과 단일 흐름 고정층 반응 시스템으로 선정된 촉매의 활성 특성을 조사 확인하였다. 본 연구에서 제시한 것과 같은 접근 방법으로 지속적으로 얻어진 결과를 반영하여 최적의 활성을 보이는 촉매 성분을 단기간에 찾아내고자 한다.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.8
• /
• pp.823-830
• /
• 2008

The feasibility study for the application of the photoelectrocatalytic decolorization of Rhodamine B(RhB) was performed in the slurry photoelectrochemical reactor with powder TiO$_2$. The photoelectrocatalytic process was consisted of powder TiO$_2$, Pt electrode and three 8 W UV-C lamps. The effects of operating conditions, such as current, electrolyte, air flow rate and electrode material were evaluated. The experimental results showed that optimum TiO$_2$ dosage and current in photoelectrocatalytic process were 0.4 g/L and 0.02 A, respectively. It was found that the RhB could be degraded more efficiently by this photoelectrocatalytic process than the sum of the two individual oxidation processes(photocatalytic and electrolytic process). It demonstrated a synergetic effect between the photo- and electrochemical catalysis. Photoelectrocatalytic process was affected to air flow rate and optimum air flow rate was 2 L/min. The electrode material and NaCl effect of decolorization of RhB were not significant within the experiment conditions.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.84.2-84.2
• /
• 2018

최근 사람의 후각으로는 감지하기 어려운 유해, 폭발성 가스로 인한 안전사고 발생이 많아짐에 따라 높은 감도를 지닌 가스 센서의 필요성이 커지고 있다. 특히 가스 검지층으로 감도 및 안정성이 뛰어난 $SnO_2$를 이용한 가스 센서 연구와 더불어 촉매 효과에 대한 연구도 활발히 진행 중이다. 본 연구에서는 물리기상증착 공정의 증착압력 등 조건들을 변화시켜 형성한 다공성 나노 구조의 $SnO_2$ 가스 검지층 위에 촉매물질을 Sputtering 방식을 이용하여 증착하였다. SEM 분석을 통해 $SnO_2$ 검지층 내 촉매물질의 분포를 확인하였다. IDT 전극 기판 위에 먼저 나노 구조의 $SnO_2$ 가스 검지층을 형성하였고 그 후에 촉매물질을 증착하였다. 제작된 샘플은 $700^{\circ}C$에서 1시간동안 튜브 퍼니스로 열처리를 진행한 뒤 챔버 내에서 측정을 진행하였다. 측정은 $300^{\circ}C$에서 CO 농도, 습도를 변화시키며 감도, 반응시간, 회복시간에 대하여 분석하였다.

• Applied Biological Chemistry
• /
• v.35 no.4
• /
• pp.294-299
• /
• 1992

In order to examine the effect of $TiO_2$ on photosterilization of microorganism. Proper content of $TiO_2$, illumination time, wave length specificity and cell concentration were investigated for photosterilization of E. coli, B. subtilis and S. cerevisiae. The amount of $TiO_2$ for photosterilization of E. coli was effective in the range of $5{\sim}20\;mg%$. The sterilization time was reduced when the low wave length below 400 nth was not cut off by glass, but the catarizing effect of $TiO_2$ was similar to overall wave length. The photosterilization effects by $TiO_2$ addition was recognized among S. cerevisiae, E. coli and B. subtilis in that order. The photosterilization time of S. cerevisiae was considerably reduced at $10^4/ml$ cell concentration compared to $10^5/ml$.

• Journal of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.152-160
• /
• 1979

The promoting effect of Ba or Sr addition was investigated for furfural hydrogenation reaction over copper-chromium oxide catalysts. X-ray diffraction patterns showed the appearance of $BaCrO_4$ and $SrCrO_4$ phases in Ba, and Sr promoted copper-chromium oxide catalysts. For both Ba and Sr promoted catalysts, the activity decline with reaction time was much smaller compared to that of unpromoted catalyst and copper-chromium oxide catalyst dispersed on silica, reproducible EPR signals of Cr(V) were observed when CO was adsorbed. The promoting effect of Ba addition can be interpreted in terms of active sites dispersion and stabilization.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.151-154
• /
• 2019

We report the effective fabrication processes for more practical monolith catalysts consisting of washcoated alumina on a cordierite honeycomb monolith (CHM) and iron oxides nanoparticles in the alumina prepared by a simple dry coating method. It is confirmed that iron oxide nanoparticles were well deposited into the mesopore of washcoated alumina which is formed on the corner wall of honeycomb channel, and the effect of annealing temperature was evaluated for carbon monoxide oxidation catalysts. $Fe_2O_3/{\gamma}-Al_2O_3/CHM$ catalysts annealed at $350^{\circ}C$ exhibited the most enhanced catalytic activity, 100% conversion efficiency at more than $200^{\circ}C$ operating temperature.