• 제목/요약/키워드: 초희박 운전조건

검색결과 5건 처리시간 0.025초

초 희박혼합기의 고온산화와 폐열회수에 관한 실험적 연구 (Experimental Study on High Temperature Oxidation of Ultra-lean Mixture and Heat Recovery)

  • 이강주;정영식;이창언;김문철;임장순
    • 에너지공학
    • /
    • 제9권4호
    • /
    • pp.319-327
    • /
    • 2000
  • 산업분야의 여러공정에서 배출되는 휘발성 유기화합물은 1차적인 작업자에 대한 유해성뿐만이 아니라 대기중에 배출시의 제 2차 오염물질의 생성 때문에 최근 들어 이러한 물질의 처리에 큰 관심이 집중되고 있다. 본 연구에서는 휘발성 유기화합물로서 프로판을 사용하여 이러한 초 희박 혼합기의 제거를 위해 재생열산화법이 제안되었다. 실험장치에는 중앙에 연소실과 전기적 열량공급장치를 장착하였다. 초 희박 혼합기의 연소실에서의 산화과정과 열사화 장치의 폐열회수 특성을 연구하기 위하여 혼합기의 농도, 유속 및 연소실 최대온도와 같은 다양한 작동조건을 고려하였다. 그 결과. 재생열산화장치가 초 희박 혼합기의 산화에 적절하게 사용될 수 있음을 알았으며 최대 96%의 제거효율 얻을 수 있었다. 산화과정중에 발생하여 배출되는 CO는 운전조건을 변화시킴으로써 그 농도를 낮출 수 있었으며 열적 NOx는 배출되지 않았다. 페열회수효율은 전 운전영역에서 높게 나타났으며 그 값이 최대 98%에 이르렀다.

  • PDF

초희박 직접분사식 가솔린 엔진용 삼원촉매의 운전조건에 따른 배기저감 특성 (Emission Reduction Characteristics of Three-way Catalyst with Engine Operating Condition Change in an Ultra-lean Gasoline Direct Injection Engine)

  • 박철웅;이선엽;이의형;이장희
    • 대한기계학회논문집B
    • /
    • 제39권9호
    • /
    • pp.727-734
    • /
    • 2015
  • 세계적으로 유가 상승에 따른 내연기관의 에너지 변환 효율을 높이고자 하는 연구가 활발히 진행되고 있다. 가솔린엔진에서 높은 열효율을 실현하기 위해서는 희박연소에 의한 비열비의 증가 및 단열화염온도의 저감에 의한 열효율 향상이 필수적이다. 직접분사식 가솔린 엔진은 연료를 직접 연소실에 공급하고 정밀한 연소제어를 통해 희박 연소가 가능하게 하지만 희박연소 한계의 확대와 안정된 희박연소제어가 요구된다. 희박연소 엔진에 대한 삼원촉매의 배출가스 저감특성은 높은 공기과잉률 및 낮은 배기가스 온도로 인해 매우 제한적이다. 이에 효과적인 삼원촉매의 개발을 위해 승용 차량용 엔진의 주요 연비시험 운전조건인 2000 rpm BMEP 2bar 조건에서 공기과잉률의 변화에 따른 배출가스 반응 및 생성 특성을 비교하였다. 희박연소 조건에서 $NO_2$가 생성되었으며, $NO_2$의 비율은 공기과잉률이 증가할수록 증가하고 $N_2O$는 감소하였다.

수소-천연가스 혼합연료기관의 최적 수소 분사율 검토 (An Investigation on the Proper Hydrogen Mixing Rate in Heavy-Duty Hydrogen-CNG Engine)

  • 임희수;김윤영;이종태
    • 한국수소및신에너지학회논문집
    • /
    • 제15권2호
    • /
    • pp.89-97
    • /
    • 2004
  • A heavy duty hydrogen enriched CNG engine has the possibility to obtain stable operation at ultra lean condition and to reduce emission extremely. And it can also serve as a so called bridge technology between the current fossil fueled engine and the future hydrogen power system. The emission, torque and brake thermal efficiency characteristics of a heavy-duty hydrogen-CNG engine were investigated to determine the proper mixing rate of hydrogen and CNG. It was found that the proper mixing rates at ${\lambda}=1.4$ and ${\lambda}=1.6$ were around 20% and 30% for hydrogen addition rate respectively.

압축비와 수소첨가율에 따른 중형 수소-천연가스 기관의 제반 성능특성 (The Characteristics of Performance in the Medium Duty Hydrogen-CNG Fueled Engine with Compression Ratio and Rate of Hydrogen Addition)

  • 김용태;이종태
    • 한국수소및신에너지학회논문집
    • /
    • 제16권2호
    • /
    • pp.191-198
    • /
    • 2005
  • Adding hydrogen gas in natural gas leads to stable combustion in internal combustion engine and its performances rely on compression ratio. To analyze the effects of compression ratio and rate of hydrogen addition on the engine performance, the characteristics of overall engine performance including emission were investigated by using the medium duty natural gas fueled engine. As results, it was found that compression ratio occurred knock was nearby compression ratio, $\varepsilon$=14 for the case that hydrogen was enriched in the natural gas fueled engine. But slight knock was occurred at $\varepsilon$=14.7 in the case of neat natural gas. Also HC and $CO_2$ were reduced around 80% and 20% respectively when the rate of hydrogen addition was increased to 50% and compression ratio from $\varepsilon$=13 to $\varepsilon$=14.7.

대형 수소-천연가스 기관의 수소첨가율에 따른 노크발생 한계압축비 (The Limit Compression Ratio of Knock Occurring by $R_{dH2}$ in the Heavy Duty Hydrogen-CNG Fueled Engine)

  • 김용태;이종태
    • 한국자동차공학회논문집
    • /
    • 제14권2호
    • /
    • pp.84-91
    • /
    • 2006
  • A heavy duty hydrogen-natural gas fueled engine can obtain stable operation at ultra lean conditions and reduce emissions extremely. Reduction of $CO_2$ in its engine is one of the most benefit. In this study, rate of hydrogen addition($R_{dH2}$) and compression ratio($\varepsilon$) were investigated including performance of this engine. As results, it was found that phenomenon of pressure oscillation when increasing $R_{dH2}$ and $\varepsilon$, it means occurring knock. It consider that pressure oscillation was increased due to fast burning speed of hydrogen. Even if same compression ratio, pressure oscillation was remarkable increased according to increasing $R_{dH2}$. Therefore, limit compression ratio of knock occurring was reduced by increasing $R_{dH2}$.