• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.22 no.4
• /
• pp.5-19
• /
• 2011

The purpose of this study is to identify possible needs for system improvements and reflect them on the operation and development of the system as a result of the usability assessment of an information site in science and technology. For this study, a variety of data collection techniques, including search logs, interviews, and think-alouds, were used. The search log data was processed to quantify four evaluation aspects, which were the effectiveness, efficiency, satisfaction, and errors. The verbal data collected by think-alouds and post-interviews were used to identify possible needs of enhancement in a qualitative analysis. The comparison of the usability before and after the system enhancement revealed an increase of 15 points for effectiveness, 35 seconds decrease in efficiency, 5 points increase in satisfaction, and 1.1 errors decreased, implying an overall improvement of the usability of the current system.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.5
• /
• pp.107-112
• /
• 2020

Ultra-lightweight password CHAM is an algorithm with efficient addition, rotation and XOR operations on resource constrained devices. CHAM shows high computational performance, especially on IoT platforms. However, lightweight block encryption algorithms used on the Internet of Things may be vulnerable to side channel analysis. In this paper, we demonstrate the vulnerability to side channel attack by attempting a first power analysis attack against CHAM. In addition, a safe algorithm was proposed and implemented by applying a masking technique to safely defend the attack. This implementation implements an efficient and secure CHAM block cipher using the instruction set of an 8-bit AVR processor.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.3
• /
• pp.48-58
• /
• 1999

In this paper, a new parallel computation method, which fully utilize the parallel processors both in mesh generation and FEM calculation for 2D/3D process simulation, is presented. High performance parallel FEM and parallel linear algebra solving technique was showed that excessive computational requirement of memory size and CPU time for the three-dimensional simulation could be treated successively. Our parallelized numerical solver successfully interpreted the transient enhanced diffusion (TED) phenomena of dopant diffusion and irregular shape of R-LOCOS within 15 minutes. Monte Carlo technique requires excessive computational requirement of CPU time. Therefore high performance parallel solving technique were employed to our cascade sputter simulation. The simulation results of Our sputter simulator allowed the calculation time of 520 sec and speedup of 25 using 30 processors. We found the optimized number of ion injection of our MC sputter simulation is 30,000.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.1
• /
• pp.1-7
• /
• 2019

Purpose: The laser processability of dental prosthesis is investigated using two ceramic composites, including 3M, Lava Ultimate and Ivoclar vivadent, IPS e.max. Materials and methods: The $CO_2$ laser, picosecond laser and femtosecond laser are used to assess the processing power of dental prosthetic materials Lava Ultimate and IPS e.max and the line processing shape was measured using a confocal microscope. Results: The brittleness, carbonization and micro crack of the ceramic composite were influenced by heat accumulation of the material and could be controlled by the laser power and pulse time. Conclusion: In the case of $CO_2$ lasers, micro crack and carbonation occurred immediately, and in the picosecond laser processing, the micro cracks are partially improved, but the carbonization occurs continuously. Finally, we confirmed the high efficiency of laser processing with femtosecond laser. In particular, Lava Ultimate, a ceramic resin composite material, showed the best processability when processed using a femtosecond laser.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.37-39
• /
• 2016

최근 Convolutional neural networks(CNN) 기반의 초해상화 기법인 Super-Resolution Convolutional Neural Networks (SRCNN) 이 좋은 PSNR 성능을 발휘하는 것으로 보고되었다 [1]. 하지만 많은 제안 방법들이 고주파 성분을 복원하는데 한계를 드러내는 것처럼, SRCNN 도 고주파 성분 복원에 한계점을 지니고 있다. 또한 SRCNN 의 네트워크 층을 깊게 만들면 좋은 PSNR 성능을 발휘하는 것으로 널리 알려져 있지만, 네트워크의 층을 깊게 하는 것은 네트워크 파라미터 학습을 어렵게 하는 경향이 있다. 네트워크의 층을 깊게 할 경우, gradient 값이 아래(역방향) 층으로 갈수록 발산하거나 0 으로 수렴하여, 네트워크 파라미터 학습이 제대로 되지 않는 현상이 발생하기 때문이다. 따라서 본 논문에서는 네트워크 층을 깊게 하는 대신에, 입력을 다중 채널로 구성하여, 네트워크에 고주파 성분에 관한 추가적인 정보를 주는 방법을 제안하였다. 많은 초해상화 기법들이 고주파 성분의 복원 능력이 부족하다는 점에 착안하여, 우리는 네트워크가 고주파 성분에 관한 많은 정보를 필요로 한다는 것을 가정하였다. 따라서 우리는 네트워크의 입력을 고주파 성분이 여러 가지 강도로 입력되도록 저해상도 입력 영상들을 구성하였다. 또한 잔차신호 네트워크(residual networks)를 도입하여, 네트워크 파라미터를 학습할 때 고주파 성분의 복원에 집중할 수 있도록 하였다. 본 논문의 효율성을 검증하기 위하여 set5 데이터와 set14 데이터에 관하여 실험을 진행하였고, SRCNN 과 비교하여 set5 데이터에서는 2, 3, 4 배에 관하여 각각 평균 0.29, 0.35, 0.17dB 의 PSNR 성능 향상이 있었으며, set14 데이터에서는 3 배의 관하여 평균 0.20dB 의 PSNR 성능 향상이 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.363-367
• /
• 2016

A test section of a supersonic wind tunnel was designed for the analysis of flow characteristics over a backward-facing step with Mach 1.0 slot injection in a supersonic flow of Mach 2.5. The cavity flow of a high-speed vehicle is very complex at supersonic speed, so it is necessary to do experiments using supersonic wind tunnels to verify numerical analysis methods. The previous 2D symmetrical nozzle was replaced with an asymmetrical nozzle. The inviscid nozzle contour was designed using Method of Characteristics (MOC), and the boundary layer thickness correction was reflected by experimental data from the wind tunnel. The results were compared with a CFD analysis. The PID control system was changed to be based on the change of tank pressure. This improved the control efficiency, and the run times of supersonic flow increased by about 1 second. The flow characteristics over a backward facing step with slot injection were visualized by a Schlieren device. This equipment will be used for an experimental study of the film cooling effectiveness over a cavity with various velocities, mass flows, and temperatures.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2011.10a
• /
• pp.18-18
• /
• 2011

본 연구는 태양초 품질에 미치는 후숙방법과 산광재료의 효과를 구명하기 위하여 2011년 8월부터 2011년 9월 25일까지 충청북도농업기술원 1중 플라스틱 하우스에서 수행하였다. 전처리 방법은 고추 수확 후 벌크(대조구), 하우스 밀봉, 비닐밀봉 등 3처리를 하였으며, 산광재료는 관행(무차광, 대조구), 차광망(35%), 천막지, 백색부직포, 흑색부직포를 건조대 위의 멀칭용 철사에 고정하여 실험을 수행하였다. 고추건조대($6{\times}1.5{\times}0.75(m)$, $L{\times}W{\times}H$)를 각 앵글로 설치하고, 고추 건조기의 건조 깔판을 깔고 고추를 널어 건조하였다. 플라스틱하우스 바닥에는 천막지를 깔고 토양으로부터 습기를 차단하여 고추 건조를 촉진코자 하였다. 고추 전처리 방법은 벌크 건조가 건조기간이 짧고 비상품과율이 낮아 건조 효율이 우수하였으나, 태양초 생산을 위한 전처리 방법으로는 하우스 밀봉이 우수하였다. 산광재료는 백색부직포 처리시 고추의 수분 증발 속도가 대조구보다 뒤졌으나, 다른 처리보다 온도가 높아 건조기간을 단축할 수 있었고, 색택이 우수할 뿐만아니라 상품성도 우수하였다.

• Industry Promotion Research
• /
• v.4 no.1
• /
• pp.21-27
• /
• 2019

This study is about the bidet which is used to clean the anal and local parts after the user seated on the left side of the toilet in the toilet. The cleaner of the bidet which is contaminated from various bacteria and dirt is washed clean with clean water to keep it clean The present invention relates to a cleaning device for a bidet cleaner that hygienically maintains a bidet used by a plurality of users. As a result of developing and studying a bidet nozzle that can be implemented with a bidet nozzle and a washing nozzle for automatically washing the jetting head of the bidet and the jetting head, the optimum jetting time of the nozzle after the hydraulic jetting is 1 second To 10 seconds, it was confirmed that the nozzle cleanliness of an average of 5 seconds was maintained at 100%. Subsequent studies will require further study of the durability of the product and the cleaning safety at a pressure of $5kg/mm^2$. Toilet bidet is a product that is closely related to the safety and life of the people, but the development of various technologies is still insufficient. Therefore, it is meaningful that this study contributed to the quality of life of the people by continuously researching and developing the bidet.

• Journal of Internet of Things and Convergence
• /
• v.9 no.1
• /
• pp.117-123
• /
• 2023

While applying new digital technologies, interest in software and artificial intelligence is quite high. In particular, many changes are being made for the development of software and artificial intelligence in the field of education. From 2025, software and artificial intelligence-related curricula will be applied to public education in elementary, middle and high schools. The Ministry of Education is also conducting various camps to experience software and artificial intelligence in various ways in elementary, middle and high schools before they are applied to public education. Several platforms for experience camps related to software and artificial intelligence are also being used. In this study, we intend to increase the educational efficiency of the learning method for software and artificial intelligence to be developed in the future by designing a model for software and artificial intelligence experiential learning platforms.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.446-447
• /
• 2010

최근 개발된 니켈 초합금 금속폼은 기존의 매연저감장치 신소재로 여겨지고 있다. 금속폼은 세가지 두드러진 특징을 갖고 있다. 첫째, 금속폼은 큰 기공의 다공성 매질로써 매연을 포집하여 축적할 수 있는 용량이 기존 필터에 비해 상대적으로 크며 그로인하여 재생 시 연소 안전성이 두드러진다. 둘째, 복잡하고 굴곡있는 기공 구조와 큰 비표면적은 물질전달 특성을 향상시켜 촉매 적용 시 촉매의 전환성능을 향상시키고 그로 인하여 귀금속 촉매량을 줄일 수 있는 장점이 있다. 셋째, 금속폼은 다양한 기공크기를 가지며, 다양한 조합의 금속폼을 개발할 수 있어 요구 성능에 따른 최적의 필터 설계를 가능케 한다. 이번연구에서는, 금속폼의 필터 성능을 다양한 실험을 통하여 측정 평가하며, 이런 이해를 기반으로 필터로 제작하여 엔진실험벤치에서 그 성능을 검증하였다. 필터의 성능은 수트 포집효율과 그에 따른 필터의 압력강하와 촉매 활성 능력으로 평가되었다. 이러한 실험과 병행하여 금속폼에서의 수트 포집과정을 모델링하고 이를 상용 프로그램인 CFD-ACE+에 추가하여 설계전용 프로그램을 개발하였으며, 엔진실험결과와 비교 검증하였다. 본 논문에서는 금속폼의 높은 매연축적용량과 향상된 물질전달 특성이 어떻게 필터의 귀금속 촉매와 체적을 줄일 수 있는지 제시하고 있다.